Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
This one has CDI bottom metal, just spotted it: https://www.snipershide.com/shooting/threads/hs-precision-varmint-stock-s-a-dbm-short-bus-paint.7212395/
The problem that I had ran into is the interface grove on the left side is not parallel with the bore of the receiver itself. I mount the barreled action in my mill and use a test indicator and sweep the groove from front to rear. If this groove doesn’t run true there is no good fix. LRB’s...
And Red high strength Loctite is required not optional if you plan to actually shoot it much. I would assemble everything, verify you can properly zero as windage adjustment is a big issue when mounting these. I have had several receivers that were out of spec along the left side interface...
That scope would be 1” correct? Badger choices would be 306-12 with any 30 mm ring set. 306-24 USMC M40A3 Or 306-39 USMC M82A2 which would be way higher than what you would need.