Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Re: HS Precision stock and factory bottom metal fit Thanks Chad. I don't have the magazine box installed yet. So, I think the problem is that the bottom portion of the stock doesn't have enough material (most likely) or that the bottom of the aluminum portion (where the pillars would...
I bought a 700 stainless ADL during one of Dick's sales last year. I just bought an HS Precision Pro-Series Sporter Stock and some factory bottom metal. After I assemble everything, I end up with a small, evenly spaced gap the whole way around between the floor plate and the stock. I do not...
Re: Trying to understand BC calculation formulas Thanks. It appears, according to this, that Sierra's method is to computationally iterate between narrowing BCs until a particular BC produces the measured final velocity, given a start velocity and various environmental factors. (Source...
I know software exists for calculating BCs, but I'm trying to understand the math behind it. According to wikipedia (which we all know is the ultimate source for correct information, ha ha), The variable information is here...
Re: What size Torx for GAP action screws? So, does the GAP/Badger DBM use Torx Plus IP30 screws (instead of the Torx T30 size)? If so, would the Torx T30 fit, albeit not to the maximum torque?
I need to get a Torx wrench for my GAP Crusader. Anyone know what Torx size they use for the two action screws? I'm guessing T30 but I can't verify this. Thanks!
Re: Adding 1" to stock length of pull <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Greg Langelius *</div><div class="ubbcode-body">Limbsaver Slip-On Recoil Pad. It comes off when it's not needed, like when you're selling the rifle, and may save you from having...
Re: Adding 1" to stock length of pull <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wnroscoe</div><div class="ubbcode-body">Have the Adj. LOP by McMillan instaleld on each stock..........by a gunsmith.</div></div> Are you referring to the spacer system (fifth...
Re: Adding 1" to stock length of pull Interesting. Good idea. The recoil pads on the B&C and McMillan stock all appear to be glued to the stock -- I can't find any screw holes to remove them, unfortunately. Is a band saw the proper way to cut the recoil pad off of the stock?
I've come to realize that I need an extra inch of length on my guns due to the fact that I have a long neck. I have a bunch of B&C Medalists on my Savages and a McMillan A5 on my GAP. I basically need to make each of them 1" longer. I'll probably send the McMillan stock back to GAP but I'd...
OK, I have a new GAP Crusader in 260 and a Savage that I customized, also in 260. Both are consistent 10-shot, 1/2 MOA guns at 200 - 300 yards with my two 260 loads -- one with 123gr AMAXes and one with 140gr AMAXes. What's interesting is that the GAP shoots both loads into basically the same...
Re: 260 match ammo alternatives for a GAP Crusader <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: davjones</div><div class="ubbcode-body">I had G.A. Precision build a rifle for me in 260 Remington and I picked it up about two weeks ago. I used Lapua brass to...
Re: 260 match ammo alternatives for a GAP Crusader <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jpspeeddemon</div><div class="ubbcode-body">what kind of performance are you getting with your handloads? how far out have you shot your handloads?</div></div> I'm...
I bought a GAP Crusader 260 last month. Great gun and I'm happy with the performance I'm using my handloads. However, I wanted to try some factory match-grade ammo to see how it compares to my handloads. I bought two boxes of Corbon 260 ammo -- one with the 123gr Scenar and the other with the...