• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Recent content by Jskmtd

  1. Jskmtd

    338 Lapua Ackley Improved Loads.

    Joden, I see your running 105.5 grains of rl33 with the 300 grain burgers, did you find anything that was causing pressure signs before around 102 grains? Thanks, Jon
  2. Jskmtd

    Range Report 215 Berger Hybrid for hunting?

    We just used the 215 on a big muley buck at 960 yards. I made a bad wind call and the shot was back of the diaphram the bullet saved us and the buck expired quickly due to the fragmenting characteristics of the bullet. Great bullet for long range.
  3. Jskmtd

    Flattening every single primer unless I run a very slow load

    I'm only seeing .002" difference between a loaded neck diameter and a fired neck diameter, so should I be turning the necks for more clearance? I'm also seeing pressure at a low powder charge for the cartridge.
  4. Jskmtd

    Flattening every single primer unless I run a very slow load

    What should the difference be between a loaded neck diameter and a fired neck diameter?
  5. Jskmtd

    Manners Colors - Actual Pics?

    Scorched Earth.
  6. Jskmtd

    Lets see those defiance builds.

    Defiance deviant hunter 20 moa rail Defiance bottom metal Proof barrel chambered in 338 Lapua Ackley Improved Christensen Arms titanium side port brake Manners EH1 stock in scorched earth Nightforce NXS 5.5-22x50 Nightforce 6 screw rings
  7. Jskmtd

    300 win mag and 225 eld-m

    Has anyone loaded the 225 eld-m in their 300 win mag? If so what is your load, including seating depth, powder and charge, primer, brass, coal, accuracy, and velocity. Just wanting to see if there is an advantage other than cost to the 215 berger...
    • Thread
  8. Jskmtd

    Ring height for my defiance deviant hunter ?

    Thanks .50 cal!
  9. Jskmtd

    Ring height for my defiance deviant hunter ?

    What height of rings are you using on your defiance deviant action with 20 moa integral rail and 50mm scope objective? I don't have the rifle together yet because I'm still waiting on parts so it's hard to measure. Any help would be much appreciated. Thanks, Jon
  10. Jskmtd

    Rimfire Rifle Photos Thread

    Flolito What did you use to add the texture? Thanks Jon
  11. Jskmtd

    Range Report 225 ELD-M vs 230 Hybrid Target

    I haven't tried that close. .16 moa is some great shooting. Thanks for the info, I will give .005 a try. Jon
  12. Jskmtd

    Range Report 225 ELD-M vs 230 Hybrid Target

    Bigwheels How far off of the lands did you end up with the 225 eld-m. I have a 10 twist benchmark barrel and I can't seem to find a good load with the 225. The 215 and 230 hybrids shoot great out of this barrel. Thanks
  13. Jskmtd

    300 win mag and 225 eld-m

    My barrel is a Benchmark 10 twist and I shoot from 4800 feet to 10,000 feet in elevation. The definitely hit the steel hard.
  14. Jskmtd

    300 win mag and 225 eld-m

    I'm going to use them on mule deer. I hope they work good because I like the accuracy they have provided.
  15. Jskmtd

    300 win mag and 225 eld-m

    I have been working up a load and have settled on one with retumbo that is getting me in the .3's and 2900 fps with my 300 win mag and a 28" barrel. I have shoot this out to 1594 yards with the g7 bc of .372 with good success. Maybe I will try .363 and see if my impacts change much. Here is a...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts