Recent content by jugi16

25 USD/ 34 CAD a box......no thanks.

How do you guys work around the Hornady pre loaded bullets when it asks in the bullet section. Is there a way to just enter your own BC and velocity, and skip it? Just looking to set up my 22LR. Cheers

So loaded 2 rounds at 81.0 went out to the range quick. Heavy bolt lift and ejector marks. Came home dumped the pound and grabbed another pound of Retumbo different lot. Loaded 84.6 again 2 rounds to see what the f....ck was going on. I have had zero issues with this load. Back out the the...

Yes so I decided to borescope my rifle as I have one. Nothing really stood out. Still worked some JB bore paste on the throat and rechecked pretty much the same. Will load a few more at 81.0 throw my magneto speed on it and if I'm having problems will dump the bottle. I've shot thousands of...

Guys had something weird happen to me today. Loaded up my usual 84.6 of Retumbo 225ELD Lapua brass which is my regular load. It was a fresh pound of powder same lot. First 2 rounds blew the primers out and hard bolt lift. I decided to pull all the bullets and recheck...yep 84.6gr that I load on...

Cadex 300 Norma 26in Bartlein Federal 215M Primers Lapua Brass Hornady 225 ELD-M Retumbo 84.6 GNS 10Thou off the lands. After 100 rounds barrel sped up and did a double 10 round node test. 84.6 of Retumbo has been shooting the lights out in my rifle.

PGW Coyote. Nope with the bullet seated the necks are still 0-001"

Thanks but if you read my post I already have gone that route. Much appreciated! Read the post.....after I expand, my brass is perfect. Not trying to be rude.....

I've always done this. 0.002" When I load for my 300 Norma every round is 0-.001" using the same methods of reloading.

kthomas it shoots well always has. Good ES SD holds well under a MOA out to 1000. I’ve just been really puzzled as to why I can’t get good concentricity with what I have been doing. I’m leaning toward something, but before I do I wanted an opinion from someone else here that may have an idea...

I've been reloading for 10 years now and for what ever reason I can't figure out whats going on with my 260 loaded ammo. Everything else I load for on my Rock chucker comes out at 0.000-0.002 mostly the 0.001 range. So here is what I'm doing. Lapua brass annealed every second firing. Full...

140 ELDMs Lapua Brass Fed 210M H4350 PGWDTI 260 Rem 26in Barrel 42.2 grains is my go to load. Very simiiar to your findings Defender3. Shot 2 rounds for each charge weight. Weighed on a FX 120i and Magneato speed. 2830FPS avg SD6.

300 Norma Mag.

Anyone here good at calculating ogive to the lands distance if I give them my reamer specs and bullet dimensions? If so PM me please. Need some numbers crunched for my 300 Norma.

Thanks Laser!