Recent content by Lawyer

Looks like a Terminus Zeus Action, maybe a proof Barrel and a Schmidt & Bender 3-27 HP to me. Nice Rig, what´s it chambered in ?

That was my guess, since their name is on the Action. As anybody can se, AI marked the Action by engraving or whatever and it´s coated afterwards. And that coating is now partially damaged, where AINA did Stamp or Engrave the Name and exposed the bare Metal. On a Rifle like an AI, which is not...

To me, that's not AI"s fault, they coated the Action, which the Importer damaged with their marking process, stamping or whatever it is. Don't blame AI for something that they didn't do

I´ve never had a problem or discharge, since i do not shoot anything dynamic, just Target shooting from the Bench or Prone. 1.5 or more lbs feels like moving a Mountain with my Finger. If a rifle has a Trigger that can´t be changed to a lighter weight one or set below 1.5 lbs, i´m out. Maybe on...

Has anyone switched the Trigger to a Timney Single Stage and what is the lowest and safest possibe weight ? I maybe could get a good Price on a used MRAD, but if i go that route, i will need a new Trigger I´m used to shoot Tiggers in my Rifles around 4-5 Ounces, i´ve read that someone set the...

Since i put them in before i even shot one Round, i can´t say if they make a difference or not. What i can say: I hate if, if i shoot a Chassis and it vibrates and has a extended ringing after shooting it. Didn´t notice any Vibration or Ringing after shooting, i would call it "dead enough"...

Have the Jellies in my ACC Elite and in my expirience they weren´t that hard to fit, just like as i expected. I used Redding Imperial Sizing Wax for both sides of the Buttstock with a bit of pressure . I had hope that the "clear" Prototypes would make it into production, since they are the...

In my opinion, the bolt should not close with little effort on the No-Go Gauge. I wouldn´t want a Headspace that long as a Reloader, cause it means the Brass will flow towards the Neck/Shoulder and the worst case could be a case head seperation after a few firings and your Brass is gone. A...

As far as i know, there is no difference between their Actions, the T3x is an updated Version of the Pevious T3, but that´s it. They all have the same lengt, just a different position for the Bolt Stop on Short Actions compared to Long Actions. Magazines in Fact are different, but i don´t know...

Right now i´m a little bit obsessed with the F Class Stock, even tough Manners Stocks are hard to get over here in Europe. What Lead Time do i have to expect for a Manners F Class, just pure Carbon Shell, Inlet may be done by my gunsmith.

MDT has Mags for 300 WSM / 6.5 PRC, but those are Medium Length, so not sure if they will work with your Action and Bottom Metal. A 300 WM Mag should work, but i´m not 100% sure Barre Freebie means Freebore, i guess ?

Is there that much difference in splash between 230/250 Grain from a 300 PRC compared to a 250 Grain 338 Lapua Mag ?

Did you upload to the Forum or do you want to use external Images ? If you upload to the Forum, i believe there is a max size of Megabytes that the Picture can have.

My latest aquisition, something most of you might not be familiar with: A Remington 700 Clone Action from Germany by AS.H, called Walküre, which means Valkyrie in German. Short Action with...

You are right, it´s purpose is not to migitate Recoil, it is meant to steady the Rifle or your Position. I´m pretty sure it´s not for everyone and you need to get used to it, like many other things in shooting. Best part is, if you don´t like, you don´t have to use is at all and if you order a...