Recent content by msmith64

I like mine, but I do not shoot it with a suppressor, I found that when I put my SDN6 on it the gun felt front heavy unbalanced and a bit awkward. So I put the flash suppressor back on. I do have a 9" AAC 300 black that feels right with the suppressor. I am having an issue with the trigger...

I do it but the powder throw is the weak link of the 650 when using extruded powders like varget, RL 16 or IMR4064. No matter what it will not throw consistent charges. I ended up using a powder funnel on my tool head and weighing each charge with a chargemaster, then dumping it in the powder...

It's one of my favorite calibers to shoot I have 3 guns chambered in that round

If you do not enter different velocities in the temperature table the software always assumes the one entered muzzle velocity you used when you zeroed and crooned the rifled the 1st time. It does not extrapolate different velocities unless you use the table

I would choose 22.7 and once you shoot a couple groups then you can decide if you want to play with seating depth. I see you mentioned group size in case you were unaware this process has nothing to do with group size it is the location of point of impact

I would not bother with the 308 if you are going to limit the barrel length to 20" and you want to shoot 1000 yards. With a 20" or shorter barrel, it will be very difficult to get enough velocity out of your load to keep it supersonic at 1000 yards.

That Savage 10 GRS can be had for $1049 and $1100 and change, now adays. I really want to see a reveiw from someone that can tell us how well they shoot or dont.

Very helpful, it also gives me things to think about and be aware of for potential issues to look for with any brand of primer

I'm like the OP trying to learn as much as I can about precision reloading, comments like this seem incomplete just saying something is junk without at least giving the reasoning even if it is subjective is not very helpful to someone like me that is trying to ramp up his knowledge. Can you give...

Its not any more complicated to build the rifle solution on the kestrel then it is on the p_c just smaller fonts

Look above the gun loader utility has the custom curves in it. down load that to your PC then create the gun profile with the Custom curve and transfer it to your kestrel

Just becareful when you screw that thunderbeast on that if there is any resistance at all stop. I screwed my brand new 30P1 onto my GAP10 and it got stuck after the fact I found several threads of people getting their TB cans stuck on Gap10's, doesn't always happen but it does occur with some...

Norton Antivirus says that this file Profile loader is acting suspiciously as I try to extract the zip file and is recommending that I block it, its recommendation is based upon heuristics can you confirm that it is in fact safe to use?

Wow, I got mine in the mail today my first thought was that maybe the box was something other than the 4500, it was so light. Once I opened the box it was the 4500 and this thing is unexpectedly small, or at least smaller than I expected, in fact my Galaxy S4 is larger. Bryan thanks for the...

Hey I'm in Memphis also welcome!