• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Recent content by outlaws51

  1. O

    Chainsaw brand??

    Husky 390XP here. Trims the shrubs just nicely. Stihl huh.Ha ha ha
  2. O

    Rifle Scopes Reviews after use on the Bushnell lrhs 3-12?

    Only complaint I have that I think needs addressed is the windage turret. Alignment of marks and honestly it feels real cheap. Sloppy like. Absolutely love everything else about the scope though. Just giving my thoughts.
  3. O

    338 LM load development?

    I had to seat the 300 otm's on the lands to get a consistent grouping when playing around at 100yds. Have you tried RL33. I know Retumbo works but you might be surprised with the results with a different powder. I did. I also noticed at 1000yds the rifle preformed way better than I thought...
  4. O

    Anyone run a 22x6mm or 224 TTH?

    H1000 works excellent. With the bergers I shoot its punching small holes. The 80gr amax is a different story though.
  5. O

    Anyone run a 22x6mm or 224 TTH?

    22-6 are flat shooters,great varmit round. I use the Berger 90gr vld and target bullets. I have been using retumbo and a buddy of mine uses H1000 with good success. I'm pushing the 90 grainers at 3220 with the retumbo.
  6. O

    Best drag bag

    Galati
  7. O

    .375 cal Berger Bullets

    Re: .375 cal Berger Bullets Is jamison going to eventually open there doors up at a later date or are the done for good?
  8. O

    6.5 Grendel Body Die

    I am trying to locate a body die for a 6.5 Grendel. I have searched and called all around and have had no luck. Could anyone tell me where I could purchase one or have one made for a reasonable price?
  9. O

    6.5 Grendel w/123 Amax

    Re: 6.5 Grendel w/123 Amax I know that I tried alot of powders trying to find a good load for the 123 smk's and Accurate 2520 was the winner for my 24" AR.
  10. O

    375 cheytac loads?

    Re: 375 cheytac loads? I ordered my 375 Cheytac build last December and received it a few weeks ago without and problems or issues. They had to wait to get the bottom metal and mags but it was well worth the wait. It is a sharp looking rifle. Just have to have patience with these companys...
  11. O

    Rifle Scopes 1/2 MOA adjustment

    Re: 1/2 MOA adjustment Why not 1/2 moa. You can hit any target with a 1/2 moa scope. Hold or favor and you are there instead of chasing a 1/4moa.If you are wanting to shoot dimes at 1000 then,well good luck.
  12. O

    Range Report 260 Remington handloads

    Re: 260 Remington handloads What would the benifits be going from H4350 to RL17 in a 24 incher shooting the 142 smk's?
  13. O

    22-6mm information/help

    I am thinking of building a 22-6mm and would like to shoot the 80-90gr amax or smk's. I plan on using this rifle for ringing steel and maybe shooting a few coyotes. I would also like to put my Gemtech G5 suppressor to use with this rifle if possible. I planned on a 26" 1-6.5 MTU or heavy varmit...
  14. O

    Suppressors Which 1911?

    Re: Which 1911? Any word on the Dan Wesson 1911's. Are they worth the money? Same price range as the Kimber.
  15. O

    Feedback Good Guy List

    Re: Good Guy List Had good deals go through with mcm308 lou400a salmonaxe farmer Diablo DustinC M40A3peacemaker keydiverfla Herber kft101 vmpgsc RFrye Erud Bill Stoffels Blacksmith codyb RandyM RSR SS8541 308LR LoMartin MrM14 XLR leagle chu2001 Bacarrat SSSamurai David777 jcf0721 RWG818 dar
See more
Top Bottom
Back