• The Shot You’ll Never Forget Giveaway - Enter To Win A Barrel From Rifle Barrel Blanks!

    Tell us about the best or most memorable shot you’ve ever taken. Contest ends June 13th and remember: subscribe for a better chance of winning!

    Join contest Subscribe

Recent content by Panhandle_Pilgrim

  1. Panhandle_Pilgrim

    SOLD Trijicon Tenmile FFP 3-18x44 MRAD

    Still available?
  2. Panhandle_Pilgrim

    6mm BR

    If you scroll through a few pages you'll find 30gr is pretty standard. I had to back off a bit with the 108 elds but Berger 105s and 107 smks both shot great with 30gr of varget.
  3. Panhandle_Pilgrim

    SOLD Trued 700 223

    PM sent
  4. Panhandle_Pilgrim

    6mm BR

    When I load some more I'll upload some photos. I didn't start high i worked up to that and like everyone has said it's a bit slow burning for a 6 BR. I thought I'd try it since I have 8lbs. I'm getting zero pressure signs so my head and fingers will be just fine, primer pockets are still tight...
  5. Panhandle_Pilgrim

    6mm BR

    Drop tube will get it to the neck/shoulder junction, slow pour slightly in to the neck. I tested up to 34 gr. All lapua brass.
  6. Panhandle_Pilgrim

    6mm BR

    I must have a fast barrel. Just finalized up two loads with RL16 and Varget with 105 VLDs. Elevation is 2500 ft.. Barrel is a 26" Hart. 33.6 gr RL16 with CCI450 (drop tube helps) gave me 2870 avg with an ES of 6 30.5 gr Varget CCI 450 Gave me 2915 Avg with es of 8. Both will shoot sub 1/4".
  7. Panhandle_Pilgrim

    6mm BR

    I was finally able to get my 6 BR out. I loaded up a bunch of the standby 30gr of Varget and 105gr Berger and it shot right at 1/4 MOA. ES wasn't terrible either with an avg of 2828fps. I tested some different seating depths and was able to print a .16 and a .17 MOA group. I made it over 2900fps...
  8. Panhandle_Pilgrim

    6mm BR

    Whats a realistic velocity i can expect out of IMR 8208 out of a 26" barrel? I also have some 6.5 StaBall to try that I found at the local shop after seeing a few with good results. I have been on the hunt for Varget for over 6 months now and I'm at the point now where its so popular and hard...
  9. Panhandle_Pilgrim

    6mm BR

    On VVs app it says for a 105 the start is 25.8 and the max is 28.9.
  10. Panhandle_Pilgrim

    6mm BR

    Just did a little test with RL16 and a straight BR case (Lapua). I was able to get 34gr with a drop tube to the neck/shoulder jct. and 32 w/o. Sierra's data says 31.6gr is the max but I have found their data to be way under pressured but I that will at least give me a place to start. Now I just...
  11. Panhandle_Pilgrim

    Reloading Components in STOCK!!

    Digging out of the archives.. its like fine aged whiskey, thats why it costs more. 🤣
  12. Panhandle_Pilgrim

    Rifle Scopes Trijicon Tenmile 4.5-30x56 Vs. Vortex Razor HD Gen II

    I ended up going with the Tract Toric, seemed too good to pass up, I just hope it isn't too good to be true. Haha
  13. Panhandle_Pilgrim

    6mm BR

    Thats good to hear. I bought lapua brass, based on what I have read there is a little more room with lapua over Peterson. Can't wait to get rolling on this. Just waiting for Graf's to get their things in order and ship my dies.
  14. Panhandle_Pilgrim

    Rifle Scopes Trijicon Tenmile 4.5-30x56 Vs. Vortex Razor HD Gen II

    I just stumbled on this post while scope shopping and doing some research on the Tenmile HX 5-25. How is everyone's holding up? I really like their MOA reticle.
  15. Panhandle_Pilgrim

    6mm BR

    I have gathered that I will need a drop tube but I did find some people using it and having great results. Hopefully I can get it to work.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts