• Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    Drop it in the replies for the chance to win a free shirt!

    Join the contest

Recent content by parker_chp

  1. P

    Nf 8x32 for elr

    I'm building a switch barrel target rifle on a stiller LA with a 30 moa rail in a xlr chassis. I will have a mag and standard bolt and plan on doing a 338 edge for going to 1760+. My question is with only 65 moa + 20moa in the reticle will the 8x32 get me out there. Most of my shooting will be...
  2. P

    meplat trimmer issue

    I borrowed a tubbs 308 meplat trimmer from a friend and run in to the issue that it wont reach the meplat of the 175 smk's im trying to trim. He has used the trimmer before and had no issues. I loosened the set screw all the way and the cutter still wont reach the meplat with the screw in the...
  3. P

    Best hands down long range rifle in .308

    I bought a rem 700 sps and shot 1G at orsa out of the box with a 4.5x14 nikon. I have sense upgraded the stock and scope and can some what hang with my buddies custom rig.
  4. P

    redding bushings

    You have come closest to answering my question diver160651. why does my brass measure consistent .331 when the bushing is .334. shouldn't the OD of the case neck be the same diameter as the ID of the bushing? by the recommendation of every where I've ever looked .337 - .003 =.334 this should...
  5. P

    redding bushings

    So here's my question/problem, I have a redding bushing that I have been using for a few years that belongs to a friend. I decided to order my own set and was measuring my new lapua brass to make sure I get the right ones. The loaded brass is .337 OD, the bushing is a .334. so I decide to check...
  6. P

    different brass?

    work a load to the lapua and just shoot it in the rest.
  7. P

    $1500 to work with what would you choose?

    I have a R700 spsv .308 1-12 in a B&c medalist with a hawke scope that has kept me in the running with several custom rigs. It will handle anything from 168 to 208 grns pretty well.
  8. P

    Question re: 185 Berger Juggernaut

    I've run the 190 smk's with 44 gr. of varget with no problems.
  9. P

    OCW Results!

    run the 44.2 or 44.5
  10. P

    Same loads...different results...I'm frustrated!

    Re: Same loads...different results...I'm frustrated! my gun (22-250) haates varget and flat base bullets try 52 gr a-max and h380 or h414.
  11. P

    Question on .308 long range

    Re: Question on .308 long range I,d go with the 190s.Small advantages go along way @ 1k. My 26in factory rig likes 43g varget, my buddies 26in rock creek likes 41.8g 4064.
  12. P

    What to do with new brass. (unfired)

    Re: What to do with new brass. (unfired) prime it, load it,shoot it,size it,reapeat 12x, and somewhere in the middle smile.
  13. P

    Gunsmithing switching internal to DBM

    I have a 700sps varm. in a B&C stock with the internal mag and I was wondering if I could switch it to a DBM?I was told the actions are different and wondered if this is true. Thanks.
  14. P

    OWC test vs. Ladder

    Re: OWC test vs. Ladder IMO they are both good but the ladder is easier to read/decipher. I always shoot 3 rounds per rung(.5gr or.2gr), it saves confusion on whether you pulled the shot/fluke and it gives you an idea on the vertical/groups.I also color code my bullets with sharpies so there...
  15. P

    OCW tests out of my hunting rifle. 30-06

    Re: OCW tests out of my hunting rifle. 30-06 I have to agree with old tex here it does seem like the same test.Plus Ive never run a ladder with less than 3 shots or running round robin its simple statistics( a pulled shot is a pulled shot).I also always look at the groups above and below the...
See more
Top Bottom
Back
Home
Forums
Merch
Alerts