Recent content by pwizl

Re: Look what RWSGunsmithing made for me <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 73 fastback</div><div class="ubbcode-body"> Im thinking about doing the same caliber in a repeater Do you use the cip length mag?</div></div> This is what RWS said in the...

Re: Look what RWSGunsmithing made for me <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 73 fastback</div><div class="ubbcode-body">Single shot or repeater? </div></div> Repeater

Re: Look what RWSGunsmithing made for me I'm leaning towards a chassis but I don't have any experience with them and have never gotten behind any of them to see how they feel. Any suggestions? My other gun is a .260 with a Manners T2 and I really like the stock so I may go with a T2-A or 4-A...

It's a barreled action in .338 Norma Mag made by RW Snyder Gunsmithing. The action was made to Roberts specs by Defiance Machine, with a fluted bolt, pinned lug and 30 moa base. Barrel is a Rock Creek, 28" finish length with a 1-8 twist, #17 heavy varmint contour and a removable RWS brake...

Re: New bedding project ***Updated** <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JMoney442</div><div class="ubbcode-body">Who makes that bolt? Looking at a Stevens for my buildup and really like that bolt. Great Job on the bedding. Looks awesome man...

Re: DBM feeding problem fix <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pyplynr</div><div class="ubbcode-body">You could also put the pin in the other hole, that you said made the mag to high and not lock in. Then carefully file the dbm latch to where it...

Re: DBM feeding problem fix <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">did you try moving the mag catch on the DBM? nice fix, that really was a big difference in the photos</div></div> I moved it to the next hole but it...

I ran into a little problem when I was getting my rifle put together. I found that the AI mag in my CDI bottom metal didn’t quite snug up to the bottom of the receiver as much as I needed it to. Now this is in no way a problem with CDI or AI or Manners, it’s just the result of the totality of...

Does anyone make extra power springs for AI mags?

Re: New bedding project ***Updated** <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Norcal Phoenix</div><div class="ubbcode-body">Proper prep is the key and it looks like it is nicely covered. <span style="color: #FF0000">What bipod is that, looks like a nice...

Re: New bedding project Got the bedding done this weekend, overall I think it went well and was actually pretty easy thanks to all the good info here on the hide. Now I'm nervous.. Couple of very shallow chips in front of recoil lug The rear action screw area was a bit of a...

Re: New bedding project <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: stockdoc</div><div class="ubbcode-body">Brownells spray on release really rocks. Can't go wrong with that. Also, instead of taping the barrel nut I usually clay the slots and bed it as part of...

After reading and re-reading the "Bedding Project" thread and various other threads and articles on the ole interweb, I'm finally starting my first bedding project. The rifle is a Stevens/Savage action that started life as a .243. It's now chambered in .260 with a McGowen barrel a bedded EGW...

Re: clamp on muzzle brakes This... http://www.kahntrol.com/

Re: SHWW Group <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tribe</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: pwizl</div><div class="ubbcode-body">Where's the shoot at Kettle falls and how often...