Recent content by RA223MM
-
WTB Giraud trimmer. 223 & 6.5
Looking for someone who wants to part with their Giraud. Will be used for trimming 223 and 6.5 creed. Shoot me a message if you have one you are willing to part with.- RA223MM
- Thread
- Replies: 0
- Forum: Buy - Sell - Trade Archive
-
fx120i auto trickle owners
Another quick tip. If anyone has vibration or perfect return to zero when removing the pan in between charges. Get a piece of granite/quartz and some anti vibration pads. I work for a countertop fabricator, so getting a piece was easy. But if you go to lowes, home depot, any kitchen/bath store...- RA223MM
- Post #22
- Forum: Reloading Depot
-
-
Annealeez modifications
Is there is a trick to remove the existing gauge and fittings? Before I totally reef on them, I wanted to check to see if there is a trick. I’m sure there is a sealant, can I hear it up as if it was red picture? Any advise would be helpful. Thank you- RA223MM
- Post #75
- Forum: Reloading Depot
-
-
turning off gas
I was Chatting with a guy at the range and he made a comment about turning off the gas in my AR to make it like a bolt gun. Cleaner brass and cleaner gun. So I did it. I just built the gun and am just fireforming the brass and getting some rounds down the barrel before load development. I have...- RA223MM
- Thread
- Replies: 5
- Forum: Semi-Automatic Rifles
-
Which regulator for my annealeez
I am looking to purchase a regulator for my annealeez. I have seen a few folks use the Goss 328-EP-70G. It's around 80 bucks. Is there a cheaper option that will still produce consistent quality results? I'm totally happy to spend the money if needed, but don't want to spend it if it's not. I...- RA223MM
- Thread
- Replies: 1
- Forum: Reloading Depot
-
Semi auto neck tension
Is this the neck tension you are using for your precision semis or just for plinking?- RA223MM
- Post #12
- Forum: Reloading Depot
