Recent content by RODENT

Re: Zero Dark Thirty I read "No Easy Day" on a flight this week. The trailer seems to fall in line with what is written. What is written is not a whole lot different than all the "documentaries" that are out. The intel gathering effort was respectfully recognized. It's a good read and...

Re: Brought tears to my eyes laughing http://youtu.be/pCdmiZyyGjQ Top 60 Ghetto Names

Re: New build caliber choice Write in - 7 Creedmoor

Re: TVP Fall Tactical Challenge How many teams to date?

Re: TVP Fall Tactical Challenge <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Breeze260</div><div class="ubbcode-body">I you have trouble with my email some are some are not... use this one [email protected] </div></div> You got it in early this...

Re: TVP Fall Tactical Challenge Breeze260, Do we use the email address in your profile? RODENT

Re: 7mm creedmoor I went out around 5:30 this evening and the temperature was still 99.4 degrees F. I chronographed 10 shots with about 30 seconds between each. The low velocity was 2869 fps and the high 2875 fps. That's with 41gr of XBR, 162gr A-Max and 210M primers on the 2nd firing on...

Re: 7mm creedmoor I'm headed out to do some 100°F load tests today. Will report back later.

Re: 7mm creedmoor You're right. HOT loads will open up primer pockets. I originally started touching the lands and it didn't take much to over pressure and open up. Once I backed off .010"+ is when it all started coming together. At 41 - 41.5 grains of XBR everything is good. DO NOT JAM THE...

Re: 7mm creedmoor <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: johnnyDL</div><div class="ubbcode-body">thanks for the info mark.just as soon as i find a barrel you will have the chance to build your first 7 creedmoor gas gun.i'm excited. </div></div> Me too...

Re: 7mm creedmoor <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: CrawDad338</div><div class="ubbcode-body">Hodgdon website shows IMR 8208 XBR as the fastest powder for 7mm-08 and 162 Amax" by a good bit, 2,725fps max load. I assume that's a 24'' test barrel. Is...

Re: 7mm creedmoor Jedi My barrel is melonited and I do agree that is a major contributing factor. I think you also need to consider barrel length, grooves etc. I believe the MOST important factor of my data is the powder. I stumbled onto it trying to find something close to the new cartridge...

Re: 7mm creedmoor Hey guys....I run a 7mmSAC (7mm Creedmoor) built by Mark at Short Action Customs. Mark provided the dies and I went to loading. I run Hornady 162gr A-Max with 41gr of 8208 XBR righ at 2900 fps. I sized all of the 6.5 brass with minimal evidence of a doughnut. I was running...

Re: New 10MIL Turret Vortex Razor HD 5-20x50 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: deadnbrkn84</div><div class="ubbcode-body">a few weeks </div></div> Thanks

Re: New 10MIL Turret Vortex Razor HD 5-20x50 Has anyone asked when they will be accepting upgrade orders?