Recent content by sgm

I just read your post in the reloading dept. you said you lapped the lugs. You only have .003" to play with if your headspace was bare min. to start with. Have a qualified gunsmith check you headspace I would not go any farther with loading for it until. your playing with fire now ,be safe and...

I agree, definitly check your brass any brass that has been streched and sized back that far is not long to this world, even one time, it will fail sooner than later.

Sounds like you should have head space checked! real cheap insurance[be safe]... One way of adjusting your sizing of your brass to your chamber is redding shell holders they come in .002" increments in thickness so your shell holder still bottoms out against die but does not set shoulder back as...

have you tried an upolstry shop or any place that works on boat canvas or awnings? might be worth a try

brian, pulled down my steel today, no damage not even a dent !. till next time.

one more meant me colby and one more [3 tottal]

I got room , its only me so far. I only have room for one more in my shack, weather is going to be nasty. but be aware it is a real back woods setup nothing fancy but you can stay dry and shoot all day at steel

north river, south of aberdeen about 7miles and 5 miles up n.river rd and 300 thru 700yds. Easyest way is to turn at montesano and take hwy107, it comes out about 3-4 miles from n. river rd

I'm going to setup and shoot some steel tomaro[sat] any takers?

I have never had one go so far as to stick but have had inconsitant depths ,slight scatching and real light rings present. Have just sarted polishing all my seater stems regardless of the brand, Forster, Redding, and RCBS.

tough to beat the 06. I have all the 30cal cartiges you mentioned if I could have only one it would be the 06, great for game out to 400 and whith high bc bullets good for out to 1000 for target shooting. Also in a pinch when your away from home hunting you go to any hardware store and find a...

I"ve loaded , shot and hunted with both. My advise would to go with the 280 for an all around catrige it shoots about the same trajectory with plenty of knock down power at resonable hunting ranges [using the proper bullet and weight]. and if you think the 280 kicks like hell you are probably...

just seat a primer in one, if it seats more than about .003"-.004" deeper than the base it is a bit much and will effect the the optimun penitration of the firing pin. If this is the case replace your uniformer.

I asume you are loading for the 308win using the blc-2. I have been loading for the 308 for years and in the past loaded with 748win powder which is real similar to blc-2 and 175smk, the rifles that I loaded for all liked mid to upper end loads but by all means start low and work up and another...

anyone going to the bench rest match at unsc this sunday, was going with mailman but his father passed away early this week [feel for you and family dj ]. I'll be going thru Oakville, rodchester and out thru grand mound if anyone needs a ride...steve