Recent content by shawn_40312

Re: Cut and thread a LMT MRP barrel. Send it to ADCO or Tornado Technologies

Re: Remington 540x aftermarket stocks Im not looking for a strictly benchrest type of stock. Any aftermarket quality stock with adjustable check rest and cut outs for the factory adjustable lop and hand stop would be preferred.

Can someone help me out? Looking to buy an aftermarket benchrest type stock for a Remington 540x but cannot find anyone that sells one.

Re: AAC cyclone is the wrong thread pitch. To update everyone on what has happened, AAC screwed up and they admitted to it over the phone, but has since made it right by paying to have the barrel threads turned down on the barrel. They gave me the other option of having a new can with the...

Re: AAC cyclone is the wrong thread pitch. It looks like AAC is going to have Tornado tech turn down the barrel threads to the proper pitch. My only other option was to start all of the paperwork back over again with a new can and i wasnt going to do that.

Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">hey sorry i thought this was more about the supressor than yu wanting to shorten a barrel. someone in here did what you want, shortened a barrel...

Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">It can be done but it looks a little silly. You also need to be sure that you will have enough metal left to thread the barrel. Meaning the...

Re: Cutting down a fluted barrel? Blaser R93 LRS2 barrel

Re: TRG22 thread adapter for 5/8-24 Suppressor Bump i would like to know this as well since my Blaser R93 has the same M18x1.0RH threads as the sako.

Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">It can be done but it looks a little silly. You also need to be sure that you will have enough metal left to thread the barrel. Meaning the...

Anyone had this done before or could recommend a gunsmith to cut and re thread a fluted barrel? Thinking about doing this for my Cyclone. Thanks.

Re: AAC cyclone is the wrong thread pitch. Is it possible to have a fluted barrel cut 4" and re threaded? The fluting would probably look like shit but....

Just went and picked up my AAC cyclone and came back disappointed. I requested M18x1.0RH thread and what i have will not even thread on. I believe they sent me one for 5/8x24. Anyone else experienced this? What can be done to the silencer or the rifle (Blaser R93 LRS2 with fluted barrel)

Re: 168 FGMM Group Sizes? My tightest groups so far were with 168's. 5 shot group measuring just under .5 at 100 yards. The rifle can shoot better than i can.

Re: Sig/Blaser LRS1 ejector issue Possible to locktite and tighten down?