Recent content by Skunce

Harrell's sells a 7/16-32, 5/8 OD radial port brake that I've used on small diameter barrels.

Do you still have the factory stock trigger? If you do I think you could shrink those groups with a change to a Timney, makes a huge difference on a 788. I think Midway has them in stock now. i

I bought a Wilson seater blank and reamed it with my chambering reamer and it works very well. On my once fired brass I'm getting about .001" run-out. I turned the necks before I sized down the Norma 300 SAUM brass in my Forster 7mm SAUM FL die. I made a couple of bushings out of 1/2" drill rod...

According to the Hornady web site they have temporarily suspended production of the 162 grain Amax. Product Availability Update - Hornady Manufacturing, Inc

Re: 338 edge chamber problem I had the same problem with one of my rifles a 7mm SAUM. Some of the rounds would chamber hard and when extracted would show a scrape mark on the bullet. The problem was too much run-out caused by my resizing die. I sent the die back to the factory and had them...