• Winner! Quick Shot Challenge: What’s the dumbest shooting myth you’ve heard?

    View thread

Recent content by Tcanupp

  1. T

    OAL and Ogive Questions

    Re: OAL and Ogive Questions The way I was taught is your ogive measurement should be less than your oal measurement. I think you need to zero your caliper on the ogive guage. For example my 175 smk 308 load has an ogive of 2.210 and an oal of about 2.80.
  2. T

    sub moa rifles.

    Re: sub moa rifles. skullandbones69, I started shooting rifles about 2 years ago and purchased a used production rifle. For about the first year I consistantly improved and competed in several local compitions that shoot between 200 to 1,000 yards. After the first year my shooting seemed to...
  3. T

    Hand primer

    Re: Hand primer I use an RCBS hand priming tool. I like the feel of seating the primers better than using my press to seat them.
  4. T

    Reloading Lapua Brass Question

    Re: Reloading Lapua Brass Question I tried to "round out a case mouth" by seating the bullet in them and didn't like the way it peeled off the copper jacket on the bullet. Not sure if it would really hurt anything but I didn't feel comfortable with it. With new lapua brass I resize with a...
  5. T

    New (old) Rifle

    Re: New (old) Rifle You could try the companies website it might get you close. Good Luck http://jga.anschuetz-sport.com/
  6. T

    Two questions

    Re: Two questions I use a sinclair primer pocket uniformer to clean out the primer pockets. I have mine in a power drill. The first time takes a little bit of brass out of the primer pocket to square it up. On the cleanings after that it just takes out the carbon. It only takes a few seconds...
  7. T

    Lube the inside of case necks when resizing?

    Re: Lube the inside of case necks when resizing? I have been using a Q tip to lube the inside of the case necks with a couple drops of RCBS case lube on it. It is time consuming but it seems to work. Then I tumble the cases to remove all the lube.
See more
Top Bottom
Back
Home
Forums
Merch
Alerts