Recent content by USGILT
-
SOLD Atlas Bipod WITH ARCA clamp - BT46
I’ll take this if still available.- USGILT
- Post #3
- Forum: Buy - Sell - Trade
-
-
Firearms Seekins PH3 6.5 PRC & 6 Creed
Which model on the 6.5PRC?- USGILT
- Post #5
- Forum: Buy - Sell - Trade
-
7prc with N555?
I’m sure if you reduce by 10% and work up you can find a good node. I’m experimenting with StaballHD currently and 175 ELDx.- USGILT
- Post #4
- Forum: Reloading Depot
-
-
LMT .308 MWS
True however, velocity isn’t everything just depends on what your trying to do.- USGILT
- Post #5,179
- Forum: Semi-Automatic Rifles
-
LMT .308 MWS
One of my better 168gr loads tested @ 63 F LMT MWS 16” CL Barrel and chronographed with Garmin Xero. 168 HPBT Nosler CC RE15 @ 42.5gr CCI No. 200 LRP FED Brass 2.800” AVG 2497 FPS ~ very close to factory 168 FGMM velocities in the same barrel (2540 FPS) *RE15 is temperature sensitive*- USGILT
- Post #5,176
- Forum: Semi-Automatic Rifles
-
LMT .308 MWS
I’m running a Sandman S with BRT 50/50 gas tubes on both 16” 308 WIN & 20” 6.5CM barrels using the factory H3 buffer. Not gassy and really smooths the system out- USGILT
- Post #5,118
- Forum: Semi-Automatic Rifles
-
-
Anyone shooting a LMT MWS in 6.5 Creedmoor
Mine definitely likes white box Hornady especially the 140 or 147 eLDM. Definitely stay away from the Aguila it shot like utter crap for me.- USGILT
- Post #3
- Forum: Semi-Automatic Rifles
-
LMT .308 MWS
Most likely the gas tube and gas key are misaligned. Have you removed and reinstalled the barrel recently? It is possible that the barrel was not completely seated properly when it was retorqued. I would separate the upper from the lower, remove the buffer and spring. Slide the BCG back and...- USGILT
- Post #5,103
- Forum: Semi-Automatic Rifles
-
-
-
-
