Cheek riser for Savage Mark II FV-SR?

DIP Products makes accessories for rimfire rifles, and I've had good luck with them in the past.

https://victorcompanyusa.com/titan-universal-cheekrest I have one on my Tikka T1X

The ITC leather riser pads work really good too, especially since it’s easily removable off on a wood stock. A number of different very affordable models. I’m using the suede one on my CZ and it works great. It actually looks better than this on the rifle.

I did one on mine. Let me look for the brand.

accu-riser monte carlo comb riser Cr-4000p. it affixes with 2 screws on top and then they have hole fillers. looks clean on mine.

lash said:

The ITC leather riser pads work really good too, especially since it’s easily removable off on a wood stock. A number of different very affordable models. I’m using the suede one on my CZ and it works great. It actually looks better than this on the rifle.

Click to expand...

Also have an ITC. Couldn`t get a decent cheek weld on my Savage 93R17 17HMR. The ITC pad has me looking right down the scope with a good weld. I recommend.

I made my own from a sheet of 0.125" Kydex. Cheap and simple, and it worked great. I heated it in the oven and then draped it over the stock. I drilled holes through the stock and just bolted it on with carriage bolts and wing nuts.

TimK said:

I made my own from a sheet of 0.125" Kydex. Cheap and simple, and it worked great. I heated it in the oven and then draped it over the stock. I drilled holes through the stock and just bolted it on with carriage bolts and wing nuts.

Click to expand...

Hi, the great idea. I have mark2 in boyd's minimalist stock and thus have concerns that strapped cheek rest will not fill good due to the shape https://www.savagearms.com/content?p=firearms&a=product_summary&s=26737
Have you make it adjustable? or just holes for the bolts, do you have a photo maybe?

The Victor Titan is great and works on just about everything. The old school cheek riser for the FN Fal would probably work, too.
FN FAL Cheekrest

John Glidewell said:

Adjustable Kydex Cheek Rest - Matthew's Fabrication

Adjustable Kydex Cheek Rest - Matthew's Fabrication Cheek Riser Cheek Rest Custom Molded, for the Greatest Accuracy - Stay On Target

matthewsfabrication.com

Click to expand...

Thank you Greatly, I appreciate it

New Infused image.

Sincerely,

Matthew

While it is a bit pricey, I like the Bradley. A very kind associate gave me one for free. I like that it straps on and you don’t have to cut or drill the stock ( mine is on a savage mark II certainly not a classic or expensive gun, but I hate doing irreversible mods on any gun) and can easily swapped onto different guns if needed