• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Sidearms & Scatterguns Handguns...show 'em

1.jpg
 
My summertime EDC kit: 9mm S&W M&P EZ, Streamlight ProTac, Buck 110 Lite. Pistol usually rides in the DeSantis IWB holster with a spare mag, appendix-carry. Nothing special, nothing custom! Just good solid kit!
image.jpg
 
After 9 months of waiting, my Les Baer made it in (just a Concept III with a couple options).
Pardon the crappy cell phone pic.
20220901_090931.jpg






Rounds 1-7 through it at 15 yards. I wish I could say that I'm going to get better with it, but this is about as good as I can do. I've got a total of 50 through the pistol now, so a lot more practice before it's broken in.
20220901_153621.jpg





Of note: Mine came with Tripp Research Cobra Mags. Not sure when that started, but you really need a magwell to keep them aesthetically pleasing.
 
Thank you.

I used same on an AXG despite all the negative feedback,

Seems to be working okay but I did get new screws and not use the supplied ones. I didn’t like the angle on the head.
 
  • Like
Reactions: candyx
Thank you.

I used same on an AXG despite all the negative feedback,

Seems to be working okay but I did get new screws and not use the supplied ones. I didn’t like the angle on the head.
I would be wary of them. There was a big thread a while back.
 
I would be wary of them. There was a big thread a while back.
Mine fits prefect and the screws were the correct thread and length. Without their product the RMR wouldn't have worked properly since its a lot smaller then the Sig cut out on the slide.
 
This one has been big fun.

I really like the heft of it….stable as hell and stupid fast recovery.

2550C773-57F8-4D92-9CF0-0420C4D92000.jpeg


27EDC077-8A6D-4CC7-98A2-F8B847C19662.jpeg


Just added the rear sight….not even sure why….it won’t be a carry gun.

Gun is crazy fast.

Targets below are rapid fire…just letting it ride.

Truly a gun that anyone could shoot well.

A47DFEAA-325E-4792-BD65-94FF473D8199.jpeg




1F5E45AC-0DF1-48D5-813D-5FE853C332B0.jpeg


0E144E0B-98A7-49D6-8D6D-504262B30936.jpeg
 
Last edited:
Doing a bit of recoil spring tuning this afternoon...
PXL_20220912_202220371.jpg


I'm temporarily running irons, as Its old RMR took a trip back to the factory to fix an issue with random blinking on/off. We'll fix that as soon as the new SRO arrives.
 
20220914_162739~2.jpg
20220914_162757~2.jpg

My Glock 45 MOS
- DIY Stipple
- DIY Trigger Polish
- OEM "-" Connector, NP3 Coated
- OEM Safety Plunger, NP3 Coated
- Radian Afterburner + Ramjet
- Kägwerks raised slide release
- Glock OEM Extended Mag Release
- Trijicon RMR Type 2
- Trijicon Suppressor Height Night Sights
- SLR Magwell
- Surefire X300 Utra
 
PXL_20220915_234229767.jpg


Did some plinking with the FN 502 and one of my Oculus 22 demo cans. The long config of this suppressor is superb, but the short config barks a bit louder than I'd like for extended shooting sessions (it's fine for short strings, though). While it's nice to have options, I think the long config will account for the vast majority of my pistol shooting.

I've had difficulty getting the 502 to run for any length of time with a suppressor, but after the last cleaning I used a generous amount of Mobil 28 grease on all the wear points and it ran flawlessly.
 
signal-2020-12-19-231345.jpg


99% percent made from stock metals. Only things not made by me are the wood grips, sights, and barrel. Everything else, screws, springs, lower and slide, and all internal parts were made from scratch.

At 25 yards have a 2 inch shot group or better.

(Edited for typo...)
 
Last edited:
Wife and I picked up a few this week. we should have them in hand next week.

3rd model 44 spec HE / Model of 1926 4” (1929 production)
E7D730F9-2D9F-4D3D-B5B8-5E049FBFB004.jpeg


27-2 3.5”
DE683CCC-189D-4180-8F6D-B4780A84BEB4.jpeg



14-1 / K38 Target Masterpiece 6” (1961-62 production)
E8654A8E-E0AA-4A3D-8586-9B10269107A6.jpeg
 
Last edited: