Both are seated long(criterion match chamber) stout charge of rl26 cci lg rifle primer 25" barr
- Thread starter flyingbrass
- Start date
If brass becomes available down the road I will probably go 7prc with a20 or 22" barrel
For hopefully the same performance
7 SAUM shooter here. If I were to do another 7mm, and it wasn't a SAUM, I'd go with the 7mm Blaser Magnum. Look it up, and RWS makes the brass for it.
Even though I have a 7 SAUM for hunting, I'll likely have a 7 PRC built if I can buy a couple cases of Hornady ammo with it. Life is getting shorter by the minute...
Came across some load data for the 7 prc on backfiretv,. I am surprised that h4831sc is looking very promising for 175 and possibly 180’s class bullets. I thought it would be too fast of powder for those weight of bullets but it might be the sweet spot.
This is my next 7.
Been shooting 7 STW for 20 years and this is the first thing that seems to out do it/ worth the jump
Last edited:
If you're looking at a 7-300 Norma Imp build maybe take a look at Defensive Edge 284 Terminator as another option to consider. Shawn always has dies available for his Terminator cartridges and you can even buy formed brass from him as well. They pretty much use Lapua or ADG brass and he doesn't charge that much extra for formed brass. DE always does a great job of providing load data for your specific build as well and makes it one stop shopping.
284 Terminator
You have entered the home of data for the Terminator family of cartridges. Like all loading data this is just a guideline to help you and not absolute information. This is simply what worked for us in just one or two rifles with our lot of powder, bullets primers etc. It is still your...
defensiveedge.net 
