• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Tikka T1X

Finally got all the parts for my T1x in.

PXL_20221102_062055694.jpg


Pretty much just a stock T1x with a $1600 optics setup (including mounts and base).

Razor LHT 4.5-22x50 FFP on PRI rings and Area 419 15 MOA base with a HS407c on top.

Didn't drop it into a chassis since I intended for this to be a sort of crossover rifle that's light enough for me to carry around, comfortably practice offhand, etc.

Originally intended it to be cheap but I don't really know any other lightweight (~22oz) FFP scope that also has low enough turrets to clear a top-mounted RDS reasonably.

Weighs about 7.7 lbs as pictured since the stock pack is unexpectedly heavy.
 
Finally got all the parts for my T1x in.




S

Pretty much just a stock T1x with a $1600 optics setup (including mounts and base).

Razor LHT 4.5-22x50 FFP on PRI rings and Area 419 15 MOA base with a HS407c on top.

Didn't drop it into a chassis since I intended for this to be a sort of crossover rifle that's light enough for me to carry around, comfortably practice offhand, etc.

Originally intended it to be cheap but I don't really know any other lightweight (~22oz) FFP scope that also has low enough turrets to clear a top-mounted RDS reasonably.

Weighs about 7.7 lbs as pictured since the stock pack is unexpectedly heavy.
I'd highly recommend adding the vertical grip, makes a much nicer rifle to shoot off a bipod and I find better for hunting purposes also.

The factory stock might not be as good a chassis for attaching a bunch of shit to but with the vertical grip and a normal sized butt pad (like on a T3) the stock is more than serviceable.
 
  • Like
Reactions: silentheart
I'd highly recommend adding the vertical grip...The factory stock might not be as good a chassis for attaching a bunch of shit to but with the vertical grip and a normal sized butt pad (like on a T3) the stock is more than serviceable.
+1 on all this. the vertical grip and t3 recoil pad essentially fix the t1x stock for like $50. The oem stock is servicable. 22LR magwell is very short, and doesn't take up tons of room between the trigger guard and the bipod.
 
Last edited:
Anyone try out the gen 2 T1x? Curious if the rifle and barrel are just as accurate as before but with the ejector modification
 
I received a LH T1X about 60 days ago. How would I know if it a v2? Or since the LH versions were so late arriving, maybe they had the ejector issue resolved already?
 
I received a LH T1X about 60 days ago. How would I know if it a v2? Or since the LH versions were so late arriving, maybe they had the ejector issue resolved already?
The v2 doesn't have the ejector wire anymore. If you don't see what looks like part of a paperclip inside the receiver near the top of the mag well, yours is a v2.
 
Late to the party here; does this come in a 16'' 18'' and 20'' barrel variation or is it only offered as a 16'' barrel length?

edit: looks like 16'' and 20''? what are recommendations for a bench-rest shooter, 16 or 20?

edit edit: went with 20''.
 
Last edited:
Anybody know if the v2 ejector parts are/will be available? Nothing showing @tikka website.
My only complaint with the T1x is the crappy ejection.
Sure would be great to find out that it's been fixed. Thanks for any help.
 
Anybody know if the v2 ejector parts are/will be available? Nothing showing @tikka website.
My only complaint with the T1x is the crappy ejection.
Sure would be great to find out that it's been fixed. Thanks for any help.
The ejector is part of the mag well but you can't just drop it in. The bolt on the v2 is narrower on the bottom, so would require machining to convert.

 
Well, I guess that eliminates that particular option. Back to trying different and
subtle changes in the profile of the "paper clip". Thanks for the info.
 
mdt xrs for the tikk1 t1x - does it still use the standard factory tikka magazines?
 
Does anyone know if there is a MLok pic rail that extends out from an Oryx chassis under the barrel like some of the Arca rails do? I hope I have explained it correctly, but I am wanting to get my bipod out further under the barrel to put some weights on the chassis and under the forearm is the only place I can put them but I need to extend my rail or find one that can mount and have the length to go under my barrel. Thanks.
 
Does anyone know if there is a MLok pic rail that extends out from an Oryx chassis under the barrel like some of the Arca rails do? I hope I have explained it correctly, but I am wanting to get my bipod out further under the barrel to put some weights on the chassis and under the forearm is the only place I can put them but I need to extend my rail or find one that can mount and have the length to go under my barrel. Thanks.

They have stuff up to 16" long
 
Anyone know of a full length Arca rail that is weighted that will fit the Oryx chassis? The one MDT has is not in stock and I don’t believe it’s weighted. Thanks.
 
Anyone know of a full length Arca rail that is weighted that will fit the Oryx chassis? The one MDT has is not in stock and I don’t believe it’s weighted. Thanks.
Area 419 would be the first place I looked - Cyber Monday Sale is still on for a couple more hours
 
  • Like
Reactions: BamaBrad
What’s the lowest scope rings you can use with the 419 30 MOA with a 42mm objective? I’m gonna run a Swfa 10x on my t1x. I have some Swfa low rings I’m not using that are .80 and maybe a set of low Seekins that are .82
 
What’s the lowest scope rings you can use with the 419 30 MOA with a 42mm objective? I’m gonna run a Swfa 10x on my t1x. I have some Swfa low rings I’m not using that are .80 and maybe a set of low Seekins that are .82
Since it’s still in my clipboard, I ended up with 0.97” rings for a 50mm over a 25 MOA DIP rail with flip caps. Fingers crossed for when it all arrives.

 
Got the new LH T1x to the range first time--excellent precision after sight-in and 100% feeding/firing reliability.

When I got home to clean, noticed some inconsistency on the breech face, the lower part of the chamber at about 6:00. I have dry fired it maybe 15 - 20 times since getting it new and taking it to the range and put about 50rd of CCI through it. But otherwise haven't done anything to it.

Is the breech face damaged, or is this normal for a T1? Not used to seeing my other rimfire breech faces look this rough.

 
  • Like
Reactions: DRAGON64
Another question if anyone can answer.

Will this cheek riser work for a T1x?
Matthews fabrication check riser .125”

I know these are somewhat universal but just wanted to make sure if anyone uses this or recommends something similar. Been using a neoprene slip on and it annoys me because it keeps sliding. Could simply wrap tape but rather have something that looks nicer and more permanent. Any thoughts and suggestions appreciated
Hello,

Yes, I custom mold my Cheek Risers to fit many different stocks, including the Tikka T1x. I also has Low Profile Allen Key Hardware as well as the Quick Adjustment Knob hardware. I just only have the Quick Adjustment Knob hardware on Amazon. The rest is on my site

I can also do images, camo patterns, etcetera on colored Kydex.

If you have any questions, don't hesitate to ask.
20221129_133936.jpg


Sincerely,

Matthew
 
Last edited:
If you plan on Shooting NRL22 you'll dread every support side stage with those knobs. Second vote for the Victor Company rest from me.
I also offer low profile hardware on my website so you can minutely adjust the Cheek Riser exactly where you need it for Actual Perfect Eye alignment with your Scope & no worries about the knobs. I just don't have that on Amazon like the link above.

I can also do Infused Images as shown in the attached photo.
20221129_133936.jpg
 
Last edited:
  • Like
Reactions: Pipefitter I’m
Got the new LH T1x to the range first time--excellent precision after sight-in and 100% feeding/firing reliability.

When I got home to clean, noticed some inconsistency on the breech face, the lower part of the chamber at about 6:00. I have dry fired it maybe 15 - 20 times since getting it new and taking it to the range and put about 50rd of CCI through it. But otherwise haven't done anything to it.

Is the breech face damaged, or is this normal for a T1? Not used to seeing my other rimfire breech faces look this rough.


Here is one that I would call normal. But, this is with 6K rounds thru it.
However, if you are satisfied with the way it shoots and functions, I would not worry about it. If you are concerned send it in.

ABJvj5ih.jpg
 
Here is one that I would call normal. But, this is with 6K rounds thru it.
However, if you are satisfied with the way it shoots and functions, I would not worry about it. If you are concerned send it in.

ABJvj5ih.jpg
Here is the breech on a 2nd rifle, maybe 2K rounds. Looks a bit off, and this one does not shoot as well as the first one.
989q4Hmh.jpg
 
Thanks for the replies, all makes sense.

Mostly wondered if this should be seen as normal for a new T1x OEM chamber mouth. Again confirming that the rifle shoots great so far, so as long as it works I can live with it not looking pretty. But it just looks a bit off, compared to the breech face on my other .22's. At about 6:00, it's almost like there's a tiny bevel or ramp cut into the chamber mouth.

Here's a better pic enlarged, with an arrow pointing to the area I'm looking at.

 
Thanks for the replies, all makes sense.

Mostly wondered if this should be seen as normal for a new T1x OEM chamber mouth. Again confirming that the rifle shoots great so far, so as long as it works I can live with it not looking pretty. But it just looks a bit off, compared to the breech face on my other .22's. At about 6:00, it's almost like there's a tiny bevel or ramp cut into the chamber mouth.

Here's a better pic enlarged, with an arrow pointing to the area I'm looking at.


A bit of a feed ramp. Looks ok to me. I wish mine looked that nice.
One has to keep in mind this is not a $3K custom. Mine shoot way above where they should for the price.
 
Last edited:
  • Like
Reactions: keenedge
A bit of a feed ramp. Looks ok to me. I wish mine looked that nice.
One has to keep in mind this is not a $3K custom. Mine shoot way above where they should for the price.
I got mine in 2020. Tikka definitely added a "feed ramp" after production. I say that because the cut isn't blued.
 
  • Like
Reactions: keenedge
the vertical grip and t3 recoil pad essentially fix the t1x stock for like $50. The oem stock is servicable. 22LR magwell is very short, and doesn't take up tons of room between the trigger guard and the bipod.

Just saw some of these posts about the T3x recoil pad.

Can you drop a barreled T1x action directly into a T3x OEM stock? Or is it only the recoil pad that's reusable on the T1x? I have a spare T3x OEM sitting around.
 
Hello,

Yes, I custom mold my Cheek Risers to fit many different stocks, including the Tikka T1x. I also has Low Profile Allen Key Hardware as well as the Quick Adjustment Knob hardware. I just only have the Quick Adjustment Knob hardware on Amazon. The rest is on my site

I can also do images, camo patterns, etcetera on colored Kydex.

If you have any questions, don't hesitate to ask. View attachment 8028351

Sincerely,

Matthew
Matthew posts like this are against the rules of the forum

Please either upgrade to a commercial account or you have to stop posting ads to your service and products

We get small one-man shop, SH is a one-man shop too, so please be respectful and follow the rules like others do, it's only fair
 
The T1x will also drop right into the Tikka CTR stock. I did this to both my 22lr and 17HMR for the advantage of the raised cheek rest. The bottom plate of the T1x is slightly narrower than the CTR bottom metal but will also bolt right in the CTR stock and uses same action screws. Bolt pattern and length of bottom plates are the same. I did transfer both the plastic horns from the T1x stocks to the CTR stocks. Same bolt pattern there also.
Here is my T1x 17HMR in factory Tikka CTR stock.
T1x 17HMR in CTR stock.JPG
 
Last edited:
I'm waiting for my T1X to be released from FFL but in the mean time a question popped up in my head. Can you use a heavy .223 compensator on a T1X or other rimfire? I have a SJC Titan which is quite a chunk collecting dust, I'm not sure if it could affect in any negative way barrel harmonics or something alike. My Tikka comes with threaded barrel. Are there any potential downsides/issues to such combo?
 
I'm waiting for my T1X to be released from FFL but in the mean time a question popped up in my head. Can you use a heavy .223 compensator on a T1X or other rimfire? I have a SJC Titan which is quite a chunk collecting dust, I'm not sure if it could affect in any negative way barrel harmonics or something alike. My Tikka comes with threaded barrel. Are there any potential downsides/issues to such combo?
Given how dirty .22 is it leads to fouling the compensator quickly. Since the lube component is soft I've seen it "hang" in the way and would get the random wild flyer from it. By wild, I'm talking several feet from where I was holding at 100.

This was on my T1x with a Harrel's AR Tuner brake and a sample size of one, but is what I experienced with it. Not had the issue since switching to a regular Cortina tuner.
 
  • Like
Reactions: left_eye_joe
ScopeList had them today. On order

Now I need to figure out a left handed stock or chassis to put on it.

JK. They just called me and said that they didn't have one to ship me and no ETA on when one will be delivered. So I guess I am cancelling and will find a new one some where else.
 
Last edited:
JK. They just called me and said that they didn't have one to ship me and no ETA on when one will be delivered. So I guess I am cancelling and will find a new one some where else.
Eurooptic is the same place as scopelist. I haven't seen any lefty t1x in 22 anywhere that isn't back ordered.