• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accuracy International Picture Thread

I stick the barrel in a vise and go to town on it. But if I want to use a bore guide, I'll just leave the barrel on the action and do it that way. Brass jag and tip, and a coated rod isn't going to hurt anything. And if it does, after a few hundred round, it'll fix itself.
 
  • Like
Reactions: RS14
A110BA76-2C09-4E2F-96DF-79A54C623544.jpeg


Night match
 
Lol just looks like you were missing some key parts there. It's tricky getting the shorty barrel in there with a suppressor 🤣
The can actually fits in there nicely. The velcro strips that retains the barrel, ripped out at some point, so unfortunately the barrel keeps falling out. I need to figure out how to fix it.
 
  • Like
Reactions: Huskydriver
Okay Snobs

This damn 308 barrel is way to long.

I want a new barrel, preferably in the 18-20” range.

Proof has a 20” I can get for like $500.

20” seems nice, but I’m gonna run a can so 18 seems more ideal.

Anything else in that $$$ range that can touch the proof pre-fit?
 
Okay Snobs

This damn 308 barrel is way to long.

I want a new barrel, preferably in the 18-20” range.

Proof has a 20” I can get for like $500.

20” seems nice, but I’m gonna run a can so 18 seems more ideal.

Anything else in that $$$ range that can touch the proof pre-fit?
AI takeoffs come up in the px a decent amount. Be a Bartlein or LW depending where it’s from
 
AI takeoffs come up in the px a decent amount. Be a Bartlein or LW depending where it’s from
I’ve been a looking. I’ve been tempted to sell/trade my 260 barrel for one as I’m too into the 308 to start messing with a different caliber lol.
 
I’ve been a looking. I’ve been tempted to sell/trade my 260 barrel for one as I’m too into the 308 to start messing with a different caliber lol.
Just a quick search showed two that sold in October here for $550

Could always just post a wtb ad in px. Or just mentioning it here may sway someone who follows this thread to part with one laying around.
 
Okay Snobs

This damn 308 barrel is way to long.

I want a new barrel, preferably in the 18-20” range.

Proof has a 20” I can get for like $500.

20” seems nice, but I’m gonna run a can so 18 seems more ideal.

Anything else in that $$$ range that can touch the proof pre-fit?

Chop your current barrel....
 
Let me have your 308 barrel and I'll cover shipping costs. Win win 😎
 
Last edited:
Is that actually gray or Elite Sand playing tricks again?
 
How are you liking the steiner?

I'ma do a lil mini review in the t6xi thread but overall for its street price the 318 is a great scope. Best glass I have seen in a Steiner ever and wouldn't be surprised if it's the same in the xtr pro. Turrets/paralax are meh but for it's price point this thing is hard to beat sub 2k.

Is that actually gray or Elite Sand playing tricks again?

It's not ES its cerakote bullshark grey iirm
 
  • Like
Reactions: BurtG
I'ma do a lil mini review in the t6xi thread but overall for its street price the 318 is a great scope. Best glass I have seen in a Steiner ever and wouldn't be surprised if it's the same in the xtr pro. Turrets/paralax are meh but for it's price point this thing is hard to beat sub 2k.



It's not ES its cerakote bullshark grey iirm
Nice! Looks good!
 
As soon as I have asr money, I'll be calling you get some thermal 😂
 
A 16" skinny barrel in an ATX chassis is probably going to look dumb. What you probably want is a Vudoo 360 barreled action with a fat bull, short CF barrel. And a 1.5" user serviceable .30 cal suppressor.

AB58F0AC-279A-4B8C-9F89-F931EC55EF3E.png


Educate yourself.


Also

Are you stalking me
 
  • Like
Reactions: Krob95
That’s probably the easy button. Gotta find a somewhat local smith who can chop/thread it. I’d loose the wrench flats but may be cheaper overall.

Why you gotta lose the wrench flats.... Like 5 min to remill some.75 flats assuming you have a standard ai profile barrel.... Give Matt at sawtooth or Greg at buggoles a shout
 
  • Like
Reactions: TheBigCountry
For reference. 1727F in the ATX chassis with a can on there. It's gonna look dorky with the tiny little anschutz mag but function over form I suppose. I would opt for a straight taper 1.20 barrel on a V360 personally.

It's good to see the Annie's getting some modernity to it.

D3C6EBA0-97C2-4ADE-B160-F80ECAD7E204.jpeg
 
Why you gotta lose the wrench flats.... Like 5 min to remill some.75 flats assuming you have a standard ai profile barrel.... Give Matt at sawtooth or Greg at buggoles a shout
Just did. I think OTM is close by too. Gonna chase a few leads. Got plenty of time since for the next 6 weeks I’m on daddy duty while the wife recovers so it may be a 2023 endeavor lol.
 
@SkyScrapin is the Mlok rail a one off? Amazing setup!
Thanks!

About as custom as a factory AI rail can get! Chopped, profiled, and then blasted with Cerakote color of choice. With all the pre-fits in the wild, it's easy to scoop one up and cut it to length too. The hardest part is filing the Form 1 ;)
 
  • Like
Reactions: Huskydriver
@SkyScrapin are those liberty defense can covers pretty nice? Thinking of getting one for my magnus sr
 
@SkyScrapin are those liberty defense can covers pretty nice? Thinking of getting one for my magnus sr

@Krob95 They are Liberty's Defense. Chris is a good dude and will get you fixed up with whatever you want. That's a Dominus SR on the shawty 308w. I need to get one for the Magnus.