Grip tape?
- Thread starter Btmann45
- Start date
Like a skateboard tape. Some folks run it on the bottom of a ARCA rail
Gotcha I’m sorry I thought you meant you can do it on the foundation one but the 360 you can. You meant you can’t on the anarchy?
Where did you get the ABR? I like it! Thinking of building a 300 NM in a Foundation and that would be very helpful.
ABR from Long Shot Precision. I fabbed the mounting block from brass stock. The Foundation stock material is so dense that you can drill & tap for fasteners.
There goes 500 more doll hairs.
What’s you Spuhr mount height?I got a few...
Here's a new one of mine, GAP Impact 737R, 6MM GT.
First time out with it.
First time out with it.
This was a SAC built rifle originally. The guy sold this and a bunch of others to GAP (mostly unfired). It was a 25 SAUM, which got removed and I had GAP put a new Bartlein on it in 6MM GT (New bolt as well). So, long story short.... SAC did the Night Bridge, I pulled the side mounts off of it for now.
Scope Base Accessories - Scope Bases - Shop
For over 30 years, Badger Ordnance has been an innovator in precision mounting systems and military grade weapon enhancements, and we’re just getting started..
www.badgerordnance.com 
Nice looking! Barrel Length?
Nice! The more I run my 22 the more I like a shorter rifle. Looking at chopping down my 26”
Well my new NRL Hunter build is done, and I picked a Foundation Revelation for it. Love the Dark Distressed pattern this one has!!
I am doing another 300 Norma in a Foundation MG2 right now... can't wait for it to get done.
I really love my Foundations... can't get enough of them, I have another onenon the way... 
Where did you get the black grip strips for your stock?
Thanks
Yes I do.. with the full arca, associated bipod, sling and mag it is like right at max weight for Open Heavy at 15lb 11 ounces. With the pic rail a bipod and short arca same sling and mag it is is like 14lbs.
Last edited:
Has anyone “customized” their forearm?? Possibly cut a flat spot into it for a thumb shelf?
Thanks
Thanks
Not sure if this is exactly what you are talking about but check it out.
www.snipershide.com
SOLD - SOLD Foundation Centurion for an Impact
Dark distressed left handed Foundation Centurion for an Impact SA, standard weight with 'Hillbilly cut' (thumb shelf on top of forend), Hawkins M5 DBM, Sawtooth Arca rail and 2.5" of butt stock spacers. Bought brand new last year and used for one season, great condition. $1350 **SOLD** Brass...
www.snipershide.com Not sure if this is exactly what you are talking about but check it out.
SOLD - SOLD Foundation Centurion for an Impact
Dark distressed left handed Foundation Centurion for an Impact SA, standard weight with 'Hillbilly cut' (thumb shelf on top of forend), Hawkins M5 DBM, Sawtooth Arca rail and 2.5" of butt stock spacers. Bought brand new last year and used for one season, great condition. $1350 **SOLD** Brass...
That is EXACTLY what I’m talking about!
“Hill Billy cut”
Thank you!
Think that person had the Foundation folks do that, or set up the table saw and let it rip?
Love my foundation, but the only thing I’d change is- for it to have some real estate for a thumb shelf.
Edit- called John Kyle (such a cool dude) it’s about 100$ plus shipping and about a 3 week turnaround.
Thank you for your replies
Last edited:
Thank you for this. Please keep us posted if you go this route
That or look into the Precision Rifle ATR. I had one for a little while
That’s what I am using. Works good
Centurion in Coyote
Revelation is Natural(in person it’s not as bright)
Pretty happy with this system.
Revelation is Natural(in person it’s not as bright)
Pretty happy with this system.
What does the revelation rifle weigh?
I went that route, just got it back and buttoned up.
Total turn around time from door to door was 3 weeks on the head,
It’s exactly what I was looking for, it’s not a big cut but it’s just right, added a little grip tape to be on the safe side.
Attachments
That looks awesome! What was the final cost? Also is there a material on the cut? Grip tape?
These Foundation stocks look pretty amazing. The material looks like it would be very rigid also.
Asking for a friend, has anyone used TREX or knock-off brand composite wood to CNC a rifle stock? Just curious how rigid in comparison to materials used in McMillan or these Foudations composite lumber would be? (and please understand, the answer should not be "just buy a completed stock" - some of us like to make things and it's the pursuit of a homemade product that is the goal) . Thanks in advance.
Asking for a friend, has anyone used TREX or knock-off brand composite wood to CNC a rifle stock? Just curious how rigid in comparison to materials used in McMillan or these Foudations composite lumber would be? (and please understand, the answer should not be "just buy a completed stock" - some of us like to make things and it's the pursuit of a homemade product that is the goal) . Thanks in advance.
