I'm measuring .174" protrusion below the 34mm tube.
Additionally, the erector tapers from 1.638" in diameter at the lowest point to 1.946" where it intersects the 34mm tube.
Last edited:
- Thread starter jb1000br
- Start date
I'm measuring .174" protrusion below the 34mm tube.
Additionally, the erector tapers from 1.638" in diameter at the lowest point to 1.946" where it intersects the 34mm tube.
Thank you very much, that’s exact what I needed. Looks like it’s a pretty hard ‘no’ on the lower mount.
It's a hard 'NO' without machining. If you are willing to mill ~.030" off the mount, it would work.
I’m using a 32mm high mbrace, what do you want to know?
Yea you’ll be fine.
Got my gen 3 razor today. Got it mounted up and played with it a bit and tomorrow I plan on shooting and getting it zeroed. My turrets are good nice and tactile and the locking elevation turret is stiff to pull up and push down. I had the turret fall down a few times dialing down but ended up being my fault I didn't pull it up enough for it to lock better. So far the scope is great and no issues like everyone else was talking about. I compared it to a xrs3 a bit the Gen 3 wins but the xrs3 is no slouch and a great scope at the price
My Gen III is back at Vortex getting it's knobs fixed but I will be getting an XRS3 soon so when both are in I am looking forward to comparing them as well.
To the guys who have sent in for turret upgrades, how long has been the r&m time before you received them back?
I just sent mine in on 12/29 they got it 1/3 and it is being delivered back to me today 1/10. So pretty quick right now.
I was told one to three weeks to when I called and got the label. But apparently that is the default times.
I've sent 2 in, my buddy sent 2 in. I think that's just a boiler plate est. My 1st one was 10 days from the time I dropped it off before I had it back. My 2nd was 14 days.
Might be but it's what they say so you can't disregard it on it's face. If you do then maybe they should change it. And I am on day 13 right now and they just got a notice they got it yesterday so might not be boiler plate.
Is this turret update to make the turrets more crisp, less mushy, or is it one where I may have misunderstood someone here saying they can make them non-locking on the elevation? My understanding is the turret crispness was fixed as an issue from like Fall 2022 on?
To get them crisper and have the knobs lock in place when pulled up and not slide down. Get it more like Gen II.
Might have been fixed later fall but the one I got in mid September had the same issues. I think the ones shipping from Vortex now have been fixed though.
Ah, thanks. So then there is no NLE update one can option for on this model, got it.
I traded my XRS3 plus cash for a Gen 3 Razor which is now the nicest optic I have owned to date. It has none of the serious issues described in this thread. The turrets are awesome, parallax ring is a little stiff but not bad and the magnification ring is smooth as can be. I did have to spend a little extra time setting the diopter after my initial range session where I had to run the parallax between 100 and 150 yard marks while setting my zero. I adjusted the diopter when I got home and verified again at 100 yards. The parallax still does not line up perfect and is just barley off of the 100 yard mark. I do shoot with prescription glasses to correct an astigmatism and am sure that has something to do with it. I will probably mess with the diopter a little more down the road. I have noticed that the Razor is a little harder to get behind that the XRS3 it replaced.
I can say the Razor cuts through the mirage better than any optic I have used. I compared it side by side to a MK5 and an XRS2 this past weekend. I ran them out to 1000 yards and the Razor was definitely the best of the three. I can't wait to get a break in the Wyoming winter weather so I can see how it does out to 2k.
I can say the Razor cuts through the mirage better than any optic I have used. I compared it side by side to a MK5 and an XRS2 this past weekend. I ran them out to 1000 yards and the Razor was definitely the best of the three. I can't wait to get a break in the Wyoming winter weather so I can see how it does out to 2k.
No I believe you can have them do that if you like but I like having the locking feature.
Shot the Gen 3 today and stupid simple to zero I really love the way they did that it is much faster. Everything is smooth and the scope functions great. Only negative thing or complaint I have is the xrs3 was way more forgiving to get behind and the Gen 3 is more finky about that but once I get use to that no issues. I do need to fine tune it my eyes better. The glass is the best I've ever had.
I thought that was fixed when you sent it back?
I never sent mine in I just got mine from a order a few months back. Only had it a week nor so. But only becomes an issue when I dial like 20 mils then back back down. Most of my shooting is long range no prs style
Sorry got it confused. Well if it does become an issue just send it in and they can fix it. Well hopefully as I will let you know tomorrow when mine gets back.
All you need is a 50 cent O ring. It's what I used before sending mine back. No need to spend anymore unless you want to.
Well my Gen III came back and I have to give them credit the knob now feels like my Gen IIs. Good lock in the up position and very crisp clear clicks. Glad I did it.
That's great! Does Vortex handle the shipping to get this done?
Yes just call them up and they will email a shipping label. Mine returned the same way Rob's did. Very happy I sent mine in.
I have both currently, EBR7D as well as the EQL. it's another one of those deals where I think the Gen3 is better but the not 1300 better (msrp)
I haven't put them both side by side in a true comparison yet, but they are both right next to each other waiting for better weather.
Mine too. Sent mine in to get parallax loosened up a bit early on, but sent it back in around Nov last year and glad I did, turrets are much more to my liking now. Fast turn around and great CS!
I sent both mine in about 1 month apart. Once they send me a "received" email I've gotten them back in less than a week. I just got the "recieved" email on Tuesday of this week, a "sent" email by Thursday, and was delivered today "Saturday". Works fantastic. I had the locking and cap lift removed. Absolutely perfect for switchbarrel rifles.
Called Vortex this AM and they emailed a USPS label. The Vortex guy told me only the first batch had the weird turrets but I don't think mine was from the first batch since I got it in early Nov last year. Got the Gen 3 boxed up and will take it to the PO tomorrow since they're closed today. Hope it doesn't take too long.
All,
I have a Razor Gen 3 (6x36x56). The distance numbers on the parallax adjustment doesn’t match the actual distance, not even close. For example, at 100 yards the parallax is set to 100 yards and its clear. At 800 yards the parallax needs to be set between 200 and 300 yards to be clear.
I also have a Razor Gen 2 (4.5x27x56), the parallax is spot on at all distances.
Thanks...
I have a Razor Gen 3 (6x36x56). The distance numbers on the parallax adjustment doesn’t match the actual distance, not even close. For example, at 100 yards the parallax is set to 100 yards and its clear. At 800 yards the parallax needs to be set between 200 and 300 yards to be clear.
I also have a Razor Gen 2 (4.5x27x56), the parallax is spot on at all distances.
Thanks...
That can happen. On my Gen2 Razors, I don’t touch the parralax knob unless I shoot at 100 yards. Beyond that, I spin the knob to around the 500yard mark and never touch it again. It’s very forgiving. Then Gen 3 is not. Parralax adjustment has to be made much more often.
Similar threads
