• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accuracy International AT-X

Just got my AT-X and love it. Now to buy a 6 dasher barrel for it and get rid of the 6.5cm. Anyone cutting the Bartlien carbon barrels for the m27? I'm new to the AI world and need something for nrl hunter.
 
Fritz @ Black Canyon Customs or Greg @ SPR (Bugholes) will do AI barrels if you have a blank.
 
Last edited:
Manzella is the AI king

giphy.gif




Also there is a high action rail for sale in the Px if someone was looking*
 
  • Haha
Reactions: Stag556
You have your right to your wrong opinion.

He has the experience with AI

2BCB59A6-25B4-470E-A6E9-E563B4EBCADF.jpeg


And I’m a terrible shot

Hit a 600 yard 3” wide target with barrel at a match last weekend

Bugholes, Ts customs , SAC are also very good
Options
 
There's no magic needed to cut a M27 AI barrel. Any top tier smith can get the job done.
 
Funny u say that, when i was calling around for AI AXSR barrels I received plenty of NO we don’t cut for AI barrels.
 
  • Like
Reactions: HD1911 and CIB2007
Funny u say that, when i was calling around for AI AXSR barrels I received plenty of NO we don’t cut for AI barrels.
Maybe I was mistaken and they don't have the magic touch (or have M27 and M30 programs :confused:.)

Does the AXSR/MC require 1.35" tenon blanks? I always figured finding or ordering blanks for the SR would be more challenging than finding someone to cut them.
 
Yes M27 vs M30. The smiths that said no don’t cut either AI tenon. No biggie, plenty of good smiths that do AI pre fits.
 
Factory AI Bartleins hammer also in my limited AI experience. Factory barrels are just limited to certain cartridges and twist rates. Plus in high demand…. U guys are shooting them out faster than they can be spun up 💪
 
  • Like
Reactions: BurtG
@jwood1284 If you look at these two rifles they both have cans and 4lbs worth of keyslot weights, which would imply that they are very arse hevy even with heavy scopes on them.View attachment 8019304
View attachment 8019306


As compared to these two rifles which have very little weight added forward.
You would expect the ones with cans and all the weights added to be very muzzle heavy with no rear weights added.
View attachment 8019326
is that the ZC527 or 420 on the FDE?
 
What are those Baker Wings type units? AI keyslot specific?
@SierraLima makes them

Latest batch is perfect. Even with arca then I put skid tape across the bottom. Super stable.

He made a batch were you could still use arca but it’s much better being down even. Not going to use arca back there during a match anyway


54EA4B53-B68D-4F13-AFB5-4F0DB73280CA.jpeg
1D9571E7-277D-47CB-AAE9-225B33EDDF35.jpeg
8457D1F4-B469-46E3-866E-DF2B29749A69.jpeg

99EAC049-997E-4127-A025-9F8BAAB8DE2E.jpeg
 
Just got off the phone with Mile High about the followers. Said they will look into it with AINA. I am going to follow up on Monday.

Neither EuroOptic or Mile High have that part number in their systems at this time.
 
  • Like
Reactions: BurtG
I may have missed it but just to verify…if I want to run the full night vision rail do I need the high rail plus a 1.5 high mount? Or can I get by with like a 1.35? The optic will be a Nightforce atacr 5-25x56. Just don’t want to order the wrong stuff. Thank you for your help
 
I may have missed it but just to verify…if I want to run the full night vision rail do I need the high rail plus a 1.5 high mount? Or can I get by with like a 1.35? The optic will be a Nightforce atacr 5-25x56. Just don’t want to order the wrong stuff. Thank you for your help

You can get by with a 1.35 scope mount and a high action rail @Glassaholic has a high action rail in the Px for sale if you need one great guy
 
  • Like
Reactions: Glassaholic
What night vision ? Most look for 1.5” height but you can mostly get by with 1.3”

Utc xii is 1.3”. Low action rail and 1.5” rings line up perfect
 
Checked with Mile High today and they are still waiting to hear from AINA about the AT-X followers.
Just got off the phone with Mile High about the followers. Said they will look into it with AINA. I am going to follow up on Monday.

Neither EuroOptic or Mile High have that part number in their systems at this time.
 
Mile High just called and said AINA told them they will not be selling the follower and spring assembly, only as whole mags with the new follower and spring.

He didn’t know a part number for the mew mags yet, or a time frame for when they will be available.

He did tell me if you are having mag issues with the AT-X to use AINA service.

Checked with Mile High today and they are still waiting to hear from AINA about the AT-X followers.
 
Mile High just called and said AINA told them they will not be selling the follower and spring assembly, only as whole mags with the new follower and spring.

He didn’t know a part number for the mew mags yet, or a time frame for when they will be available.

He did tell me if you are having mag issues with the AT-X to use AINA service.
Appreciate the update. I'm not surprised by it, but it does seem kind of messed up for those of us that had issues (one mag had to be sent back, and another that "usually" works). Would've been nice to buy a follower spring, for those of us that have multiple AI's and/or swap between .308 and 6.5, and already have a boat load of mags. <shrug> At over $100 a mag, I'm thinking some people are going to be a little irritated if they have buy a whole new mag. But that's just MHO, and am not privy to what may have drove this particular business decision (supply chain logistics, production run impacts, etc.).
 
If you want a full proof solution to your AT-X if it’s not feeding properly then go with a shim. Since it has been installed, I’ve not had a single failure and that includes 6BR with the HRD kit in a standard AW mag (also works flawlessly with the AT-X mag). 6.5CM, 260 Rem, .308 Win all work perfectly too and I’ve not had to touch a feed lip.
62225066-667D-4007-8C6A-5939F06BFB7E.jpeg