- Thread starter Hondo64d
- Start date
Hit the hardware store in the morning
Last edited:
Post a pic. With a file or grinder if you know what your doing u can easily fix it.
Action: Zermatt Origin LA
Trigger: TriggerTech Primary
Stock: Greyboe Terrain
Bottom Metal: A mix of RedHawk & Remington BDL parts with a Wyatt box
Barrel: Preferred Barrel Blanks 24" 280AI - shouldered
Future Barrel: Criterion 19" 270 Win, threaded, fluted, cerakoted black, barrel nut to save weight. Should arrive in a few months.
Suppressor: Harvester Evo (in ATF jail)
Scope: Meopta Optika6 2.5-15x44 BDC 30mm SFP
Front Action Screw: Bubba'd
Weight Unloaded with Scope: 10.2lbs.
RedHawk Comment: I shot them a note last night after 10pm that the threads on my Front Action Screw were a mess. By 7am Central, they responded that they would send me a replacement.
Obviously, this rig is not svelte set up this way. This is my I don't have to walk far setup. I will probably have the 280 AI barrel cut back to 21" and threaded at some point.
- When the 270 barrel is on the action, it will get a lighter scope and end up in the low 8lb range.
Trigger: TriggerTech Primary
Stock: Greyboe Terrain
Bottom Metal: A mix of RedHawk & Remington BDL parts with a Wyatt box
Barrel: Preferred Barrel Blanks 24" 280AI - shouldered
Future Barrel: Criterion 19" 270 Win, threaded, fluted, cerakoted black, barrel nut to save weight. Should arrive in a few months.
Suppressor: Harvester Evo (in ATF jail)
Scope: Meopta Optika6 2.5-15x44 BDC 30mm SFP
Front Action Screw: Bubba'd
Weight Unloaded with Scope: 10.2lbs.
RedHawk Comment: I shot them a note last night after 10pm that the threads on my Front Action Screw were a mess. By 7am Central, they responded that they would send me a replacement.
Obviously, this rig is not svelte set up this way. This is my I don't have to walk far setup. I will probably have the 280 AI barrel cut back to 21" and threaded at some point.
- When the 270 barrel is on the action, it will get a lighter scope and end up in the low 8lb range.
Last edited:
Planning my first build with an Origin LA for a 7 Rem Mag and having a bit of hard time validating what bottom metal options to run. Any recommendations on bottom metal setup all in for around $200-250?
My plans as of now —>
Trigger: Trigger Tech Special
Barrel: Proof Carbon 24”, 1:8.4
Stock: Mesa precision altitude
Bottom metal & AICS mag: Mesa precision and mag (TBD) or standard BDL kit
My plans as of now —>
Trigger: Trigger Tech Special
Barrel: Proof Carbon 24”, 1:8.4
Stock: Mesa precision altitude
Bottom metal & AICS mag: Mesa precision and mag (TBD) or standard BDL kit
I went with BDL because I was confused by all the inletting talk + I didn't want any rattling steel mags making noise.
Honestly, if I could have figured out a way to have a flush fit DBM without spending a fortune, I would have gone that route.
My rifle is 100% hunting. Guys shooting matches will probably want the ability to load larger magazines.
Hawkins precision makes a nice stuff both in the flush hunter and M5.
Like the firing pin assembly or the whole bolt
Whole bolt assembly please, close up as possible please
Thank you sir, the first one works for me the best, he had it put together wrong he had the washer in between the baffle and the head. Which way does the baffle go? Mine has a taper on one side and flat on other?
Search engines are your friend when you need instruction.
It is very hard to find a good video on how to reassemble the bolt assembly and put it back into the action. I tried all kinds of search terms and could not find a detailed video on bolt disassembly. Most of the videos showed how easy it was to take it apart and said just do it in the reverse.
I have been told you can reinstall the bolt in the field without tools, but getting my bolt assembly back on the action was very difficult. I did it, but I couldn't do it in the field.
It's literally the same steps but backwards. And yes it's just at easy.
I'll try to make a video today.
Thank you. I only really had trouble twisting the firing pin assembly back onto the bolt. It felt very difficult to get it to twist back - like the spring pressure was really high
Get the lobe lined up, push in, and make sure you twist the right direction.
Can anyone measure the height of the top 20moa rail on an origin short action for me? I'm trying to find a means to raise my optic height while keeping my current scope mount. Curios if the Murphy precision rail will net me anything. Thanks!
Origin with push feed bolt head
I’m having trouble with a 223ai build. It Will not feed AI cases reliably. Fire forming is no problem and is very accurate. .3-.4s consistently. I have tried aics mags, mdt mags, multiple bullets at multiple oal. Had Smith chamfer chamber mouth and polish. Still no dice. Rounds bind in the chamber and leave a ring on case body. Must be manually removed. This happens 60% of the time.
It Runs smooth as silk from any magazine with vanilla 223. I assume I have a CRF Bolt head as I bought the barreled action used here.
Is the push feed bulkhead the answer? I have reached out to Zermatt asking the same question. Any help or suggestions would be great.
Thanks
I’m having trouble with a 223ai build. It Will not feed AI cases reliably. Fire forming is no problem and is very accurate. .3-.4s consistently. I have tried aics mags, mdt mags, multiple bullets at multiple oal. Had Smith chamfer chamber mouth and polish. Still no dice. Rounds bind in the chamber and leave a ring on case body. Must be manually removed. This happens 60% of the time.
It Runs smooth as silk from any magazine with vanilla 223. I assume I have a CRF Bolt head as I bought the barreled action used here.
Is the push feed bulkhead the answer? I have reached out to Zermatt asking the same question. Any help or suggestions would be great.
Thanks
Also found this thread….
www.snipershide.com
223 ackley feeding issues
Hello I have an origin action in an MDT ACC chassis with Mdt metal 223 mags. The bolt can be felt dragging across the plastic insert with an empty mag. I can feed slowly with just 223 ammo, but not normal or fast speed. when it comes to the improved case it jams and a slight mark can be seen on...
www.snipershide.com Match rifle:
Origin SA
Preferred Barrel Blanks 23" Medium Palma - 6.5CM
KRG Bravo
Seekins Rings
Bushnell DMR3 3.5-21x50
Timney HIT Trigger
Area419 Sidewinder
Atlas CAL bipod
Hunting Rifle:
Origin SA
Proof Carbon 24" Sendero - 300 WSM
XLR Element 4.0 (aluminum)
Seekins Rings
Bushnell LRTS 4.5-18x44
Timney Trigger
Area419 Hellfire
Atlas CAL bipod
Weight: 11 lbs 6 oz field ready (including mag (3 round), ammo, sling, Atlas bipod, scope caps, etc.)
Origin SA
Preferred Barrel Blanks 23" Medium Palma - 6.5CM
KRG Bravo
Seekins Rings
Bushnell DMR3 3.5-21x50
Timney HIT Trigger
Area419 Sidewinder
Atlas CAL bipod
Hunting Rifle:
Origin SA
Proof Carbon 24" Sendero - 300 WSM
XLR Element 4.0 (aluminum)
Seekins Rings
Bushnell LRTS 4.5-18x44
Timney Trigger
Area419 Hellfire
Atlas CAL bipod
Weight: 11 lbs 6 oz field ready (including mag (3 round), ammo, sling, Atlas bipod, scope caps, etc.)
How do you like your barrel from preferred barrel blanks?
It has been great actually. It shoots better than I am capable of. I have debated whether I will get another one for my next barrel, or go with something else. The jury is still out on that I guess. There is no reason that I wouldn't use another one, except that other peoples' opinions of them being a low cost barrel company has gotten in my head. But my experience has been great.
Glad to hear that. You can’t beat their production times. I’ve always been a single point cut barrel guy, just because others always told me they give you the best chance of having a good accurate barrel. I have a preferred barrel blanks barrel being chambered here shortly that I’m going to try out.
Let me know how it turns out. I will be interested to hear what you think.
I did some research on this at one time and came to the conclusion that two front rem 700 mounts work on the origin. I have not tried this myself though
Hawkins makes a set of rings that attach directly to the action
Stiller Tactical 30/300; Predator w/ Recoil Pin
LIGHTWEIGHT ALLOY SCOPE MOUNTS The one-piece construction of the Talley Lightweight Alloy Scope Mount is unique. The rigid design has no joint between the scope and the rifle. The Talley Lightweight unitized design eliminates the possibility of an "out of alignment" interface or "loose...
www.talleymanufacturing.com Talley rings that will supposedly work.
I didn't realize this was a thread until today.
I've had this setup for a few years now, 2018 (or early 2019) was when I received my Origin.
24 inch .223 PVA 1:7 twist (I know it's kind of stupid long). It was actually a blem, so I got it on a good discount.
KRG Bravo Chassis
Harris BRM-S bipod
Triggertech Flat trigger
Nighforce 20 MOA rail
Vortex Viper PST Gen II 5-25
Vortex rings (medium height?)
I use the Accurate Mag 10 round 223 AICS mags
Love this gun, thinking about building a 300 Blk SBR with an Origin and KRG Bravo for hogs here in Texas. Too many dumb ideas and not enough money.
I've had this setup for a few years now, 2018 (or early 2019) was when I received my Origin.
24 inch .223 PVA 1:7 twist (I know it's kind of stupid long). It was actually a blem, so I got it on a good discount.
KRG Bravo Chassis
Harris BRM-S bipod
Triggertech Flat trigger
Nighforce 20 MOA rail
Vortex Viper PST Gen II 5-25
Vortex rings (medium height?)
I use the Accurate Mag 10 round 223 AICS mags
Love this gun, thinking about building a 300 Blk SBR with an Origin and KRG Bravo for hogs here in Texas. Too many dumb ideas and not enough money.
Attachments
Fresh lefty build.
22br
24" Brux
Krg w-3
TT Diamond
75gr berger vld @100
1 Sighter + 5 shot group = happy in pants.
Feeds like a champ. I see myself shooting this rifle alot this year...not sure how my other bolt guns will feel about that..
I fricking love this setup and definitely see another Origin build for me this year.
22br
24" Brux
Krg w-3
TT Diamond
75gr berger vld @100
1 Sighter + 5 shot group = happy in pants.
Feeds like a champ. I see myself shooting this rifle alot this year...not sure how my other bolt guns will feel about that..
I fricking love this setup and definitely see another Origin build for me this year.
My 223/6.5prc set up:
22" Krieger 223 barrel with a custom spray paint job to go with the GAP camo
Manners LRH with the Hawkins hunter DBM and full arca rail from manners
TT diamond 2 stage
Poverty spec Arken 5-25
Not pictured is my 24" carbon 6 6.5 PRC barrel.
22" Krieger 223 barrel with a custom spray paint job to go with the GAP camo
Manners LRH with the Hawkins hunter DBM and full arca rail from manners
TT diamond 2 stage
Poverty spec Arken 5-25
Not pictured is my 24" carbon 6 6.5 PRC barrel.
What cheek pad is that on the LRH?
Can’t argue with the Origin KRG PVA combo, it’s pretty similar to mine.
Started gathering parts last week and my first origin build is now underway! Just waiting on a minimalist spigot and the barrel to show up, (PVA 20" 6 creed - marksman contour)
How does it shoot
whats going on here with the old school 2-way color scheme on an Origin
Northland special, bead blast origin
Zermatt Arms Origin Beadblast Short ActionNorthland Shooters Supply
Northland Shooters Supply (NSS) offers the following Zermatt Arms/ Bighorn Arms Origin short action with a beadblast finish
northlandshooterssupply.com Already beat to the answer above. But yes beadblast from NSS. They had them in stock, was a few week wait for the nitride to be available, so I decided to be different, lol.
Should hopefully look good with the stainless barrel And silver trigger
Finally got it done. 20" Bartlein 5R 7.5 twist heavy palma 6.5 Creedmoor, JP APAC, Steiner T6xi, and Tubb two stage trigger. Mil spec OD green and midnight bronze Cerakote. Now I have to work up some loads.
Last edited:
Barrel arrived today! Got it assembled and verified headspace. Hoping to shoot it Saturday
Origin (NSS beadblast)
PVA Osprey 6mm creed 1:7 20" Marksman contour- threaded 5/8"
Krg bravo with minimalist spigot
Triggertech primary "independence"
Trijicon Tenmile 4-24x50
Seekins 30mm rings (low)
Origin (NSS beadblast)
PVA Osprey 6mm creed 1:7 20" Marksman contour- threaded 5/8"
Krg bravo with minimalist spigot
Triggertech primary "independence"
Trijicon Tenmile 4-24x50
Seekins 30mm rings (low)
I decided to lighten up my original build (24" 280AI and heavy Meopta scope). Barrel nut Criterion barrel with lighter Leupold scope. I am also converting to a DBM H&S Prevision bottom metal. 9lbs as pictured.
I like how the Greyboe stock blends into the old teak wood.
I like how the Greyboe stock blends into the old teak wood.
Attachments
Origin, TT Pro Curved, AI AT-X Chassis custom painted. 28" heavy comp Hawkhill 22br barrel with Ace brake. Gen3 razor in an audere cantilever unimount.
Stiller Tactical 30/300; Predator w/ Recoil Pin
LIGHTWEIGHT ALLOY SCOPE MOUNTS The one-piece construction of the Talley Lightweight Alloy Scope Mount is unique. The rigid design has no joint between the scope and the rifle. The Talley Lightweight unitized design eliminates the possibility of an "out of alignment" interface or "loose...
Talley rings that will supposedly work.
They fit well on my Orgin.
Similar threads
