Just get the L3I Elite mag. 14rds and good to go
- Thread starter RAVAGE88
- Start date
I got my case of Midas Plus from the Lapua testing center! Below are some 50 yard groups. The flyers were my fault.
Here are some 100 yard groups.
The rifle that shot those groups.
Here are some 100 yard groups.
The rifle that shot those groups.
My Vudoo shipped late Wednesday last week and since I am only one state away it was at FedEx Friday afternoon so I figured they would deliver it to my FFL Saturday...Nope I'm getting the full wait LOL....should get it tomorrow or Tuesday....Ordered November 3rd...I did call and order on the phone to make sure everything I wanted was in house...I wanted the 1.2" Bart barrel but went with 22" MTU because of the quoted 4 month + wait.
Yea, the wait can be tough. Especially at the end. (Don't forget to give your FFL some space to get it through their books too. Mine usually asks for a day. ) I doubt you'll be disappointed with the 22" MTU. It'll be a shooter!
This will be my second Vudoo...first had the ACE barrel and if this one shoots as good I'll be very happy!
As far as my FFL...I had my guys roof his parents house for about $11k less than the lowest quote he had gotten from other companies so as soon as my transfers come off the truck I get a call...Theres PPL you give GOOD deals and there's PPL you give GREAT deals...your FFL is one of those PPL you give a GREAT+ deal!!
My Vudoo was ordered a year ago. So I don’t know what make barrel it has in it.
Furthermore, I don’t want to know about the barrel.
It is accurate no matter what make the barrel.
I’m afraid that if I find out who made the barrel it might jinx me and I will want something better and never be satisfied.
Furthermore, I don’t want to know about the barrel.
It is accurate no matter what make the barrel.
I’m afraid that if I find out who made the barrel it might jinx me and I will want something better and never be satisfied.
If it shoots I'm happy its when it don't shoot or stops shooting good that the "want something better" starts with me....My problem is the add-on...do I need the thumb rest for my Matrix pro? Or the Vert #1 or #2? Or the trigger finger rest/support? YES I NEED all of those LOL!!
I was advised to come to this thread to learn. So posting so I can find my way back here.
For Vudoo owners everywhere; I designed a KYL hostage target shooting game that might prove fun and challenging for anyone that's interested.
www.snipershide.com
Here is the target but go to the thread to download the PDF file.
Free Printable To-Scale Targets
The attached target, rules and score sheet aren't necessarily to scale targets. If anyone is like me, they like the KYL targets. So I thought about combining the hostage target shooting game with KYL. The attachment has the target, the rules and a score sheet with pre-printed values to help...
www.snipershide.com Here is the target but go to the thread to download the PDF file.
Last edited:
Merry Christmas
SANTA LIKES RIMFIRE!
SANTA LIKES RIMFIRE!
Great pic!! And this reminds me I need to watch “Fat Man” tonight.
Of course he is!
Hey all.
For you guys running longer barrels and faster twist rates, how is your longer range accuracy?
Seems like what I have read, the average length is 20-24”.
For you guys running longer barrels and faster twist rates, how is your longer range accuracy?
Seems like what I have read, the average length is 20-24”.
Try these.
Attachments
Vudoo rifles and their owners deserve challenging targets. I have another KYL target up here:
www.snipershide.com
Here are a couple of versions of the target.
Free Printable To-Scale Targets
The attached target, rules and score sheet aren't necessarily to scale targets. If anyone is like me, they like the KYL targets. So I thought about combining the hostage target shooting game with KYL. The attachment has the target, the rules and a score sheet with pre-printed values to help...
www.snipershide.com Here are a couple of versions of the target.
The more I shoot this rifle, the more I like it. 32.5 mils elevation to 500m with Center-X. It was averaging 7/10 hits on the 500 x 750mm plate at 500m. The hit indicator was lucky to survive 
Is that Majura Range ACT?The more I shoot this rifle, the more I like it. 32.5 mils elevation to 500m with Center-X. It was averaging 7/10 hits on the 500 x 750mm plate at 500m. The hit indicator was lucky to survive
View attachment 8311643
View attachment 8311647
View attachment 8311649
Yep, sure is
With my 1.2” barrel I have a 1.125” mount with my 56mm Zeiss S3. There isn’t a lot of room between the barrel and scope cap though but enough. I would probably go with a 1.26” on a 1.25”.
Running a 1.25” barrel and a ZC527 - using ARC M-Brace 1.26”
Work in motion. V22 360 20” mtu, ai at-x chassis. will be using Leupold mk5 5-25 pr2 and mostly inside 300 yrds can’t decide on the mount. I have a 20moa spuhr mount already; I don’t know if that would be manageable with 30moa action rail.
Is v22 360 action rail standard 700 rail?
Is v22 360 action rail standard 700 rail?
Last edited:
Whether it would work or not would have to do with the amount of elevation in your scope. I took a quick look and it looks like you have 35 mils of elevation which should be plenty with 50 moa of cant in the base and mount.
And no the scope bases are not Remington 700 bases. You need to get them from Vudoo.
Vudoo actions have the same radius on front & rear receiver rings; while M700's front ring is the same radius as Vudoo, rear ring has much flatter radius.
Just emailed Vudoo last week to check in on my order (360 - 24 inch 1.20 Barreled Action). Sounds like the next batch of Bartlein Barrels will be in this month and I'm toward to the top of the list so I should have it no later than the beginning of March 
Many of you know that I've designed and made a number of items for my Vudoo 3-60 using my 3D printer (you can see some HERE).
On the Vudoo Gun Works Facebook page (edit: BUT NOT FROM VUDOO, see messages below)), I saw a new magazine follower that lets you put 12 rounds in a 10-round magazine, but I typically load 11 (by using a low-profile magazine extension) so that I have that extra round as a "spare" or as an extra sighter, especially since our local matches typically have five shots per target and I'll use the one extra to verify adjustment for wind and still easily keep count.
But that 12-shot follower makes you lose the load-assist buttons, and I like using them and wouldn't want to give them up. I wondered if I could design and make a follower that let me load 11 rounds and still keep the spring buttons...?
Here is a photo of that 12-shot follower (from the FB page):
And here is the design of my 11-shot follower that does indeed let me keep the spring buttons. Of course it also lets me actually load 12 cartridges in my magazines that also already have a low-profile 1-shot mag extension on them.
I've only shot a few magazines through the gun using it, but so far, perfect feeding! Maybe Vudoo will consider offering one like it.
MIKE C.
On the Vudoo Gun Works Facebook page (edit: BUT NOT FROM VUDOO, see messages below)), I saw a new magazine follower that lets you put 12 rounds in a 10-round magazine, but I typically load 11 (by using a low-profile magazine extension) so that I have that extra round as a "spare" or as an extra sighter, especially since our local matches typically have five shots per target and I'll use the one extra to verify adjustment for wind and still easily keep count.
But that 12-shot follower makes you lose the load-assist buttons, and I like using them and wouldn't want to give them up. I wondered if I could design and make a follower that let me load 11 rounds and still keep the spring buttons...?
Here is a photo of that 12-shot follower (from the FB page):
And here is the design of my 11-shot follower that does indeed let me keep the spring buttons. Of course it also lets me actually load 12 cartridges in my magazines that also already have a low-profile 1-shot mag extension on them.
I've only shot a few magazines through the gun using it, but so far, perfect feeding! Maybe Vudoo will consider offering one like it.
MIKE C.
Last edited:
Vudoo Gun Works does NOT make a 12 round follower. All we make is the standard red follower that goes in our 10 round polymer mag. There are a few folks making different followers like ones made by MK Machining but it designed for their 5 round extension.
My mistake — I saw it on the VGW Facebook page and incorrectly presumed it had been posted by one of your own folks! Sorry ‘bout that.
No worries. I believe the ones posted on Facebook are from Anarchy Outdoors. Good guys to deal with. I was just wanted to ensure people don't call up Vudoo looking for them and then get frustrated when we tell them we don't sell them.
My 2024 comp rifle:
Vudoo V22 Gen II
MullerWorks 25in 1.250 1-13
Trigger Tech Diamond
MDT ACC Elite
Apex Rival X 4-32x56
MDT 1 Piece Mount
Vudoo V22 Gen II
MullerWorks 25in 1.250 1-13
Trigger Tech Diamond
MDT ACC Elite
Apex Rival X 4-32x56
MDT 1 Piece Mount
My new 360 just in from the builder. Woox, Mullerworks, EC V2, Atlas, and B&A trigger.
Yes and no. This one is the 2.0 with the wider dogbone, and it’s too wide. I’m trying to get ahold Dan to see if I can get the old style.
The mounting hole pattern for the bolts is different. If you can't get it from Dan/PQP, let me know -- I have both an old HoleShot (polished aluminum) and a new PQP (black anodize) here myself. The new one was too wide for my preference also, so I designed and 3D-printed a dogbone that's just like the old style width and angle but that fits on the new PQP mounting hole pattern. It's not Delrin, but certainly does the job and my stocks ride smoothly on it. MIKE
PM sent
Looks like the builder did a very good job for you...can't wait to see how it shoots for you.
I'm running a 1.25 Krieger spur mount with a gen3 razor no problem clearing.
I posted some new rimfire KYL targets here:
www.snipershide.com
Free Printable To-Scale Targets
The attached target, rules and score sheet aren't necessarily to scale targets. If anyone is like me, they like the KYL targets. So I thought about combining the hostage target shooting game with KYL. The attachment has the target, the rules and a score sheet with pre-printed values to help...
www.snipershide.com How is this one shooting with the longer barrel?
I have one of the first 360s out the door.
I finally managed to break the bolt stop. Half way through a 120 round prone match...
I got home, pulled the barrel and boxed up the action. Back to St George it goes.
Hopefully it wont be more than a few weeks to get the action machined for the new bolt stop.
I finally managed to break the bolt stop. Half way through a 120 round prone match...
I got home, pulled the barrel and boxed up the action. Back to St George it goes.
Hopefully it wont be more than a few weeks to get the action machined for the new bolt stop.
Guess you be without a rifle for a bit
It shoots extremely well. Any and all ammo groups in it with zero issues. I need to lot test it to get some ammo with better SDs which I will hopefully be doing next month. Ammo across the board is definitely running considerably slower. I wont be running Center X in this thing as the stuff I had left from my other rifle was barely averaging 1020fps.
I was taking apart a couple of my magazines, and the little mag base insert went flying on one of them. After an initial panic, I found it... but to avoid a potential critical stoppage in the future, I decided to add some extras of that to my spare parts bag. Since I couldn't find them easily for purchase, I created a 3D model and printed some. Here's how the model looks:
I've added these to my 3D-print items page HERE (item # 7A), if anybody else wants some.
MIKE
I've added these to my 3D-print items page HERE (item # 7A), if anybody else wants some.
MIKE
Nope…Guess you be without a rifle for a bit
Have we even met?
Two (or four) is one and one is none.
The DBM allows for closer fit of their mags. I have both, I prefer the Vudoo inlet.
Are there any fitment issues with changing out the Vudoo DBM with a Hawkins or MDT bottom metal on a foundation stock? I've found the Vudoo DBM doesn't work with ATRS AICS aluminum magazines and would need to swap it out. However I'm concerned the stock inletting won't allow for it.
Similar threads
