Wanting To Buy
Sent you a PM, as well
I have a Tikka lite 1-8” twist converted from 223 to 22 Creedmoor. Shoots really well, dies, 100-ish alpha brass fired in this chamber.
The stock was dipped. Scope not included, uses standard 308 mags.
Shoots 88 ELDM well, also 75 ELDM. The target below was working up a load with the 75s and superperformance in once-fired alpha lrp brass.
I have $900 in it, I’d sell it all for that, and include whatever 75s and 88s I have left.
I’m switching to 22ARC so won’t need this.
I have a Tikka lite 1-8” twist converted from 223 to 22 Creedmoor. Shoots really well, dies, 100-ish alpha brass fired in this chamber.
The stock was dipped. Scope not included, uses standard 308 mags.
Shoots 88 ELDM well, also 75 ELDM. The target below was working up a load with the 75s and superperformance in once-fired alpha lrp brass.
I have $900 in it, I’d sell it all for that, and include whatever 75s and 88s I have left.
I’m switching to 22ARC so won’t need this.
Sent a PM Yesterday
Fully tricked out 700, trued, extractor, fluted, bolt release by Karl Feldkamp. EH1 w/fixed cheek piece (spacers can adj height) receiver assembly properly bedded in stock. Hawkins Prec Hunter DBM, Carbon 6 barrel 24” with MBM brake (removeable 5/8-24” thread). I don’t recall trigger exactly, but likely a Timney. NF direct mount 30mm 1” height
Custom Cerakote. Reamer was 0.120 meant to run 75-80 class bullets, not the super longs like 90 grain A-tips. Brand new, not broke in just test fired. WTO chambered and assembled, EVERYTHING of theirs shoots 1/2 MOA! Everything done right no short cuts. Built for myself. I’m just running 223 and 22GT so hav’nt gotten into 22CM…4000$ plus shipping
Custom Cerakote. Reamer was 0.120 meant to run 75-80 class bullets, not the super longs like 90 grain A-tips. Brand new, not broke in just test fired. WTO chambered and assembled, EVERYTHING of theirs shoots 1/2 MOA! Everything done right no short cuts. Built for myself. I’m just running 223 and 22GT so hav’nt gotten into 22CM…4000$ plus shipping
That's bad ass!!
Unless I missed something, or you’re trolling people, tell us some necessary info…
What are you using the rifle for?
What’s your budget?
Anything you want to see on it?
Anything you don’t want to see on it?
And if I did miss where all that was stated I apologize.
Send me the parts and I can build it for you in one week.
What are you using the rifle for?
What’s your budget?
Anything you want to see on it?
Anything you don’t want to see on it?
And if I did miss where all that was stated I apologize.
Send me the parts and I can build it for you in one week.
Yeah not much info here on what he wants exactly or budget. Guessing he wants a varmit rig cause he’s posted he’s looking for a 640res LRF thermal also.
Yeah I’m looking for something not to heavy to use on eastern coyotes and budget will depend on gun of course and it will wear a suppressor when mine gets out of jail… love Hawkins hunter bottom metal and fluted or carbon barrels
I’d sell you this whole setup but she’s a
. Used for a high rack/tripod rig here in west Texas.Attachments
Right at 13lbs like you see it there with Halo XRF, .224 VAPR suppressor etc. It’s fun though.
I’m not. I would entertain selling the whole setup if someone was serious and had the cash but not separating it.
