If they come out with a LA ATX AICS , a terminus in that would be better than a AXSR
#harshtuths
#nohump
#harshtuths
#nohump
If they come out with a LA ATX AICS , a terminus in that would be better than a AXSR
#harshtuths
#nohump
Ain't gonna lie, I probably wouldn't miss the hump. I've asked it many times why it even exists?If they come out with a LA ATX AICS , a terminus in that would be better than a AXSR
#harshtuths
#nohump
Don’t take away the suspense of Gen 8Ain't gonna lie, I probably wouldn't miss the hump. I've asked it many times why it even exists?
Right? I love my AXSR, but that hump is a bitch a lot of the time in weird match positions. They should have just went with the ATX style in the long and short, the same way the AXSA/AXMC were the same. Eh, can’t have it all and end of the day, my misses are on me not on it.Ain't gonna lie, I probably wouldn't miss the hump. I've asked it many times why it even exists?
pretty sure it was FDE.View attachment 8339479
lol what was the original color on this prestigious rifle
(honestly tho I wish I had the balls to do that do my rifle, at some point...)
Well I did a thing that will probably catch me as much flak as trying to put the rem 700 bolt handle on awhile back. That was ill advised.Right? I love my AXSR, but that hump is a bitch a lot of the time in weird match positions. They should have just went with the ATX style in the long and short, the same way the AXSA/AXMC were the same. Eh, can’t have it all and end of the day, my misses are on me not on it.
I do it all the time.... The one grey ops made specifically for the ai rocks... Also works well on ARsWell I did a thing that will probably catch me as much flak as trying to put the rem 700 bolt handle on awhile back. That was ill advised.
So what was messing me up with the hump when shooting the axsr from prs type positional barricades on a bag (which isnt often) was the tendency for it to torque side to side with the high center of gravity when using the hump. So I, ummm, I tried a gamer plate (I know, I know) and it is like the heavens opened and stability was bestowed. Forgive me father...
View attachment 8339501
No need to circle it…Well I did a thing that will probably catch me as much flak as trying to put the rem 700 bolt handle on awhile back. That was ill advised.
So what was messing me up with the hump when shooting the axsr from prs type positional barricades on a bag (which isnt often) was the tendency for it to torque side to side with the high center of gravity when using the hump. So I, ummm, I tried a gamer plate (I know, I know) and it is like the heavens opened and stability was bestowed. Forgive me father...
View attachment 8339501
Thank God... I have felt so alone all this time. . That's the gray ops mini gun plate v2.I do it all the time.... The one grey ops mage specifically for the ai rocks... Also works well on ARs
Nice reply. I can't stop laughingI think we need to doxx @Nik H and get AI & all the retailers to boycott him. He seems to have single-handedly cornered the market on AI lefty bolts, all manner of skins in all colors, and god only knows what else lol
I bet he has 5 identical backup trucks, 8 diesel backup generators, 6 wives, three stoves in his house (with 6 microwaves), and 3 entire warehouses full of toilet paper…
It was you @Nik H that bought all the toilet paper during the pandemic. Right?
I can personally confirm they are physically there. I just picked up complete spare skins from MHS.Mile High shows that they have the AT non thumb hole green in stock 26966GR. https://www.milehighshooting.com/accuracy-international-26966-at-aics-stock-sides-sa-folding/
LOLIf they come out with a LA ATX AICS , a terminus in that would be better than a AXSR
#harshtuths
#nohump
You can just talk to that dude who does the sick custom bolt mods with his dremel.... He'll surely slice you out a sneaky little bolt handle slot on an ATX AICS.If they come out with a LA ATX AICS , a terminus in that would be better than a AXSR
#harshtuths
#nohump
I demand access to your AI 3-way OnlyFans.View attachment 8339596
Best part of owning all three complete (*ahem*) matching bolts, is that two can snuggle while the other is bolt deep in the action.
I can personally confirm they are physically there. I just picked up complete spare skins from MHS.
Relaxxxx the AT Greenie is still there.Whoa whoa whoa where's the at?
You should hit up badger ordnance for a sticker pack. They have the master builder (Lego) themed stickers and shirts. If your kid likes stickers and legos, that’s a win win with BO.Got my long AT-X top bridge, spare AT-X "Optimized" magazine, and a 3" section of Pic rail with a sling swivel cup in for my AT-X from Mile High Shooting today.
They must know I have a 6 year old because they tossed in a bunch of stickers. That kid LOVES stickers, he had a great time slapping them on my lunch box, reloading bench, and who knows what else.
You have to be a premium OnlyFeet subscriber before you can gain access to that content tier.I demand access to your AI 3-way OnlyFans.
If you don't intend to load, have you looked at Copper Creek? It will cost more, but you can actually have them develop a load for your rifle, then you can order that custom load whenever you need it. If you want higher MV, you can have them do a load development pack to find out how high you can go in your specific rifle before you get into pressure.I don't reload so I am always looking for good factory ammo but their cost is high compared to FGMM which works pretty well. I want something in 308 with a bit more MV than FGMM
Relaxxxx the AT Greenie is still there. View attachment 8339639
You have to be a premium OnlyFeet subscriber before you can gain access to that content tier.
But here’s a taste… (sometimes the T1 likes to watch)
View attachment 8339670
Nice rifle@BurtG This is our Curtis Valor in an AXSR AICS. 20" 1:10" 308.
It's a stunning rifle, it chambers rounds in a way that sometimes you have to check to make sure it stripped one out of the magazine. This rifle is 'tinny', it's clunky, the bolt rattles from side to side, AICS style 12 round 308 steel magazines are noisy under recoil. Even being a 60 degree bolt (which is why the Valor was chosen), it still is nowhere near the same quality.
It's a great rifle and serves it's purpose as a light, easy to shoot and carry rig for 100-500 meter deer hunting and training, but is in a different league in terms of build quality, feel and overall adaptability.
View attachment 8339597
I haven't looked at them. I have heard good things about them though.If you don't intend to load, have you looked at Copper Creek? It will cost more, but you can actually have them develop a load for your rifle, then you can order that custom load whenever you need it. If you want higher MV, you can have them do a load development pack to find out how high you can go in your specific rifle before you get into pressure.
https://coppercreekcartridgeco.com
Uhhh did you just try to steal my invention, OnlyFeet?You have to be a premium OnlyFeet subscriber before you can gain access to that content tier.
But here’s a taste… (sometimes the T1 likes to watch)
View attachment 8339670
Don't flame me. I'm just an average dude, screwing around on the ranch and breaking in a new barrel. I have zero aspirations of becoming the next YouTube sensation...which is good, because I suck. Trying to talk and shoot at the same time is harder than I thought.
Also, I had my second feeding issue (different mag this time) with the 6GT. Two different followers. Factory (left), and the second that I got from MH (right)...which I know is also "factory". That is two malfunctions in 85 rounds.
View attachment 8339852
Don't flame me. I'm just an average dude, screwing around on the ranch and breaking in a new barrel. I have zero aspirations of becoming the next YouTube sensation...which is good, because I suck. Trying to talk and shoot at the same time is harder than I thought.
Also, I had my second feeding issue (different mag this time) with the 6GT. Two different followers. Factory (left), and the second that I got from MH (right)...which I know is also "factory". That is two malfunctions in 85 rounds.
View attachment 8339852
Man... Just insulted all of prs in 12 words lolBrakes are for POWs and people that lack follow through and NPOA
if he said brakes and 25# guns. Those people are worse than swifties getting into football.Man... Just insulted all of prs in 12 words lol
Ah, I didn’t read your post correctly… I agree, a LA ATX AICS would beNice rifle
Buttttt
I’m just finna say it
that’s not light
Not terminus
Has a hump
Dang flatlanderShoot suppressed you heathens!
View attachment 8340036View attachment 8340037View attachment 8340038
and shooting 6BRA.if he said brakes and 25# guns. Those people are worse than swifties getting into football.
6BRAH is the nbtand shooting 6BRA.
The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.and shooting 6BRA.
The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.
The range I go to is currently in the straight contour 32" barrel shooting the least recoiling round phase.The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.
Meh, free recoil, fast 6's, that's so 2023. All the guys that have been making fun of 6.5 'manbun' will soon be singing it's praises again, and saying the 6 shooters are ghey.The range I go to is currently in the straight contour 32" barrel shooting the least recoiling round phase.