I don’t. Was going too, but the bc on the jugs looks better on paper then that of the 175 smk. So went with the jugs instead. Though, I did snag a box of 169 smk. Which has the same bc as the 175 smk. Should be able to get the 169’s close to 2800. 26” barrel 1:10 and reloads really gets the 185’s going though. Some use MR 2000 to get it in the 2700 plus range with a 20” barrel.
I can't blame you for going with the jugs
I really need to get my Vudoo out. It’s going to have a birthday in my safe coming up…
Haven’t even fired it yet
Reunited with my old AXSR.
Last edited:
For those from before in the AX vs AW mags. Apparently I didn't do that to AW mags but I have plenty of aics mags I did it to. 2 modified AX mags next to a standard aics mag.
Ok, two question:
The first is a pretty obvious question, but wanted to confirm.
AT wanting to run a clip-on needs:
Second Q:
Anyone have pics of a 1.5” scope mount on an AT/AE/AW on the low rail? Preferably a Spuhr 4002, but I’ll take whatever.
I’m asking that b/c I’m not sure if I’d go with a clip-on or just a thermal scope. If I go the latter I just want a visual of how high the scope looks.
The first is a pretty obvious question, but wanted to confirm.
AT wanting to run a clip-on needs:
- AT Night Vision Bracket
- 20 MOA Night Vision Rail for the AT NV Bracket
- High AI pic rail for scope
- And here is the question: 1.5” rings, right?
Second Q:
Anyone have pics of a 1.5” scope mount on an AT/AE/AW on the low rail? Preferably a Spuhr 4002, but I’ll take whatever.
I’m asking that b/c I’m not sure if I’d go with a clip-on or just a thermal scope. If I go the latter I just want a visual of how high the scope looks.
Last edited:
#bestriflesever
Screwed on some unknown round count $100 barrel in old man caliber.
Hornady is the king as usual. Shame they discontinued the steel match. My scar really likes it
I know. 3 shot groups. But I don’t have the skill / patience I used to
Oh no cherry picking except for excluding the 5 shoter I decided to go rapid fire on
Screwed on some unknown round count $100 barrel in old man caliber.
Hornady is the king as usual. Shame they discontinued the steel match. My scar really likes it
I know. 3 shot groups. But I don’t have the skill / patience I used to
Oh no cherry picking except for excluding the 5 shoter I decided to go rapid fire on
Last edited:
AI AE Mk I, 20 MOA low rail, 20 MOA IMUNS, PST Gen II 5-25x50, Vortex extra high(1.54") rings, PVS-27. Not the best pic, but I could mock up a living room pick if you need it.
Yeah, just a side shot without the NV would work. Just seeing how high they look with that low rail. I like high rings (1.5” to 1.4”) but looks factor into it a bit more than usual as, well, it’s an AI.
Heres a High action rail with 1.5" height spuhr.Yeah, just a side shot without the NV would work. Just seeing how high they look with that low rail. I like high rings (1.5” to 1.4”) but looks factor into it a bit more than usual as, well, it’s an AI.
Attachments
1.35 to 1.5 if you want to be on the plane
1.5 with low rail.You still got that at?
Attachments
What’s the difference between that and the high rail. If using a superior 1.3 centerline clip on ?
Kick ass! That’s a perfect pic. That height on a low rail looks good.
I know, but if I go that way I’ll just attach the high rail and NV mount.
My green AT in 308 with a 24” barrel arrived today.
All I can say is, “Now I get it.”
-Stan
All I can say is, “Now I get it.”
-Stan
Did you do the chest high drop test yet? You can’t say you get it til you’ve done the chest high drop test.
Did you struggle to cycle the bolt like all the PRSers like to complain about?
Since the AT was built as a sniper weapon system, and not a PRS rifle, I judged it on its own merits.
-Stan
This is the AT with a Spuhr 4002C with high action rail. This is what Eurooptoc told me what I need for be planar with NV clip on. The 20 Moa rail is still on back order. 
Mile High had the 20 moa front rail in stock as of yesterday (I ordered one).
Holy crap, another LH AI in the wild, in an aftermarket chassis to boot
Nothing except that is the exception and not the norm... Just giving general advice on why they run a high rail and it's designed for a 1.5-1.35" scope mount to be on plane with what were the std night vision specs at the time.... You do you boo
Yeah the chassis is fantastic. Perfectly happy with this and the thumbhole over an atx. Kudos to the guy who came up with it
Mile High just sent me an email "Upgrade to precision" when I already have an AXSR.
I'm calling for congressional hearings. We need an Inquisition!
Somebody needs to be sent to the reeducation camp.
I'm calling for congressional hearings. We need an Inquisition!
Somebody needs to be sent to the reeducation camp.
^ like my awm
On a modern note.
Hit me up if ya need a 6br barrel
Also
#boltliftsoheavyyouneed4weightstoholdit
On a modern note.
Hit me up if ya need a 6br barrel
Also
#boltliftsoheavyyouneed4weightstoholdit
You bought another ATx???
Only 3 serial numbers younger than my other one
And
Turns out AI won't swap a bolt head, they want to just replace the whole bolt body (for $800 +). Looks like I also have a large firing pin despite the ad saying it was sfp.
I'm not overly upset given how little I paid for the rifle, but at this point I'm thinking I'll just have LRI clean up and bush the bolt, even if it won't be pretty.
Not sure what thread but a member asked about LRI about making bolts.
I said I’d buy one if every size asap.
My alerts on things I follow on the hide don’t always come through so there might be something going on.
If you find it..tag me in
What can is on the AXSR? Looks like a 338 Ultra SR, but for some reason looks longer…
It’s the optical inch…must’ve manscaped…
Safe queen guys are having a stroke that the rifles are leaned against a rusty barrel lol
There he is! Thanks for letting me play with the AW!
