The bridge is $275, and the hinge is $262, that's $537. The ATX-C is $1288 more than the AT-X. That's $751 for a lighter bolt lift; I suppose it's worth it to the spandex-wearing PRS guys.
- Thread starter R.Walters
- Start date
You forgot about the $751 plastic butthook. Plus you get a free second AI sticker now...
Last edited:
Is anyone else having hesitation with support hand placement on AT-XC? That gas port is right where I place my support hand on occasions.
Common spot for a port on any action. And unless you're using some pretty questionable ammo, not really anything that you're going to utilize.
Is anyone else having hesitation with support hand placement on AT-XC? That gas port is right where I place my support hand on occasions
Honestly how often is this a thing really? I mean I could see @rustyinbend needing this feature with his reloading skills but he and @candyx can't lift the bolt on the AI so it's a moot point ....
Look at the bright side-you won't be clipping that finger nail ever again--Is anyone else having hesitation with support hand placement on AT-XC? That gas port is right where I place my support hand on occasions
At the very least, you will think you died and went to heaven with the sound it makes!
I still wonder why they did this redesign. Unless they are hiding all the AX308's that are blowing apart.
Hopefully because of the soon to be short mag support. Soon is a relative term here. We might see it in a few years or a couple more decades.
Good point.
Based on some comments that Scott has made in Shot Show interviews, it seems like they also largely did it to bring their short action receiver into alignment with their long action AXSR. Since at this point the SA has been the same for nearly a decade while the LA has been having progressive updates.
From a manufacturing standpoint it makes a lot of sense to make all of your products the same way with the same tooling, just modifying dimensions for SA vs LA.
There are a lot more differences between the short action and long action AI'S besides length.
Because it was perfect . . . until the skinny-jeans flat billed crew complained about how heavy the bolt lift was.* And now, you're going to have the equivalent of a 4-cylinder turbo replacing the bulletproof Toyota V6. The people complaining about the heavy bolt lift are the bolt-action world functional equivalent of Greta Thunberg forcing manufacturers to sacrifice unparalleled reliability for environmental sensibility.**
*I'm just joking.
**I'm still just joking.
Understood, there are differences in material thickness in strategic areas as well as some geometry changes to improve structural integrity to withstand the higher pressures. At the end of the day, the new SA is going to reflect the design of the LA AXSR in a smaller package.
If its a short throw bolt I'll be able to lift it, got a new shotgun today check it out .
I contacted Sporting Services UK.
They confirmed that the AT and AX have been discontinued.
They said their last order for ATs will be arriving mid this year, with no future orders in sight. Spare and accessories should still be available into the future.
They seem to have a pretty direct line to AI so sounds like nows the time to find an AX or AT if you really want one.
They confirmed that the AT and AX have been discontinued.
They said their last order for ATs will be arriving mid this year, with no future orders in sight. Spare and accessories should still be available into the future.
They seem to have a pretty direct line to AI so sounds like nows the time to find an AX or AT if you really want one.
I understood from previous threads that the context was “Discontinued for civilian sales.”
Did Sporting Services UK happen to discuss this point?
-Stan
Why does it matter.... They are moving on eventually its going to be all axsr atxc
As a guy who bought an AT this week, clarity is a good thing.
If police and military AT usage keep me in spare parts, that is also a good thing.
-Stan
Indeed.This must be your first time with an ai roll out?
Please, school me based on your previous experience with AI roll-outs.
-Stan
Lol my sweet child. Read up here on the hide ...... Your gonna be aight tho
Over promise and under deliver pretty much sums it up.
But we keep buying them anyway because they are still the best.
All I want is my AT.
None of the newer models appeal to me, admittedly for weird irrational reasons disconnected from reality.
-Stan
Did anyone else see this gem ?
Just in case an outdated unreliable chronograph will convince you to pull the trigger on a $10k rifle …
Just in case an outdated unreliable chronograph will convince you to pull the trigger on a $10k rifle …
I didn't get a free labradar when I bought my AXSR, i had to buy my own. MotherF. Should have waited I guess.
You can probably find one in the px for $35
This is the equivalent of including a Allen 9 round buttstock ammo holder at this point
I get it. Just being a little facetious
I searched my email, and that promo is from Mile High lol. Must be a write off to get rid of existing Labradar stock. Although…not like the SR is a huge seller. Who knows?Did anyone else see this gem ?
Just in case an outdated unreliable chronograph will convince you to pull the trigger on a $10k rifle …View attachment 8346031
I didn't ask and they didn't say specifically, other than spares and accessories will still be available.
There must be thousands of AW/AT/AXs in civilian/Mil/LEO hands that I can't see them dropping support for these older rifles anytime soon.
Being an AI you'd hope that they won't be prone to breaking every match, so I wouldn't be too worried about it.
I was all set to order an AT-X, then when the new AT-XC got announced I was keen to get one.
But once I found out the AT was being dis continued I decided to jump on that instead, while I can still get one.
Not the race gun I probably should be buying but YOLO.
I shoot field target comps in Europe and all shots are taken off hand unsupported.
Anybody know the app weight of an AX-XC without all the bells and whistels with a 24" rem varmint barrel?
Configured just like this LG400:
Anybody know the app weight of an AX-XC without all the bells and whistels with a 24" rem varmint barrel?
Configured just like this LG400:
I think you want an older AI that had the stock shaped like the old 3P target rifles.
.
Slow roll.......is the biggest understatement possible.
Thank you.
Lucky for me none of their new PRS-inspired designs are appealing, which is why I grabbed an AT before they go extinct to civilians.
-Stan
Last edited:
Thank you.
Lucky for me none of their new PRS-inspired designs are appealing, which is why I grabbed an AT before they go extinct to civilians.
-Stan
I kinda think this was the plan. Let's make a "replacement" that cost a lot more and has features not everyone wants. Then "discontinue" our old model.
It's gotta be driving sales of the AT. I know I had very little desire to get one. It's always been a "someday I'll grab one" thought. Now I'm actually thinking I need one.
It’s a good way to get rid of the AT action inventory like how the Gen1-3 ATX helped reduce inventory to make room for the new ATXMC action.
I hope they have a close out sale on the AT. Picked up a AT-X gen3 a while back and I like it, but I don't shoot PRS so don't really benefit from most of the features. For instance I'd rather have replaceable plastic on the stock versus a full length metal arca that can be damaged easily.
It seems like prices on the AT were increased, so I wouldn't count on a sale. I would (and did) jump on one of the deals in the PX if you want to have one.
No, been there, done that.
I shoot better with a chassis rifle like the Walther LG400. Moving targets off hand is also in the equation.
That's why the new AI looks interesting. However, the weight in stock config is way too high.
Slimming down the new Anschutz is also an option. The Annie is much cheaper and has a better trigger.
Can’t get what in the US?
Anshutz 1782 rifle is. That combo not as I see. https://www.anschutznorthamerica.com/store/c87/1782_Series.html
Isn't that just an MDT acc premier chassis?
Are they available here? @MDT_OFFICIAL @MDT_Josh
Now back to the thread subject.
