• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Tikka T3X Super Varmint 223

Got the Tikka out to a mile yesterday. Our DOPE calculation gave us 24.5 mils, but we finally got a splash on the hill and ended up at 27.5 mils. You can see the small hits as the 88 grain bullets vs there 6.5 vs 300WM. Actually its harder to see the 6.5 vs 300WM than the 88 grain hits.

I went 3/10 on the 88 grain load, took us 5 rounds to figure our DOPE then 3/5. Mybuddy took the 300WM and went 3/5 with 2 shots on top of each other on right side of the target and I shot the 6.5CM for a couple of pops. We were very happy to get on steel with the Tikka at a mile. You can see the small pops with the Tikka.



PB
 
  • Like
Reactions: lou400a and stello1001
Pappasniper said:
Got the Tikka out to a mile yesterday. Our DOPE calculation gave us 24.5 mils, but we finally got a splash on the hill and ended up at 27.5 mils. You can see the small hits as the 88 grain bullets vs there 6.5 vs 300WM. Actually its harder to see the 6.5 vs 300WM than the 88 grain hits.

I went 3/10 on the 88 grain load, took us 5 rounds to figure our DOPE then 3/5. Mybuddy took the 300WM and went 3/5 with 2 shots on top of each other on right side of the target and I shot the 6.5CM for a couple of pops. We were very happy to get on steel with the Tikka at a mile. You can see the small pops with the Tikka.



PB
Click to expand...
Wait wut?
Your 8 twist 223 is stabilizing 88s?

You gotta velocity on that?
 
  • Like
  • Haha
Reactions: Johnerz, stello1001 and ma smith
CaptArab said:
Wait wut?
Your 8 twist 223 is stabilizing 88s?

You gotta velocity on that?
Click to expand...
Yeah, that would be impressive. It would probably need a good amount of velocity, but I bet it would do it. I think I'm gonna buy a Super Varmint and have the barrel chopped to 18" to lighten it up a touch. Probably gonna reload 80ELDM's or 77TMK's for it.
 
i put together a Super Varmint for a PD hunt I'm going on in June , started out factory then changed it up a bit
best groups are with 77's but 55 Vmax's are what I'll be shooting on the PD trip.

TS2

started with this
fuhTbRp.jpg


current status
gBydyA4.jpg
 
  • Like
Reactions: Pappasniper, lou400a, carbonbased and 1 other person
CaptArab said:
Wait wut?
Your 8 twist 223 is stabilizing 88s?

You gotta velocity on that?
Click to expand...
Our first load that we shot this was hotter, but our last batch was 2,755 FPS. If my poor memory serves me, we were trashing brass and was maybe 100 FPS faster. I almost fucked up my bolt with that load.

And yes the 88 ELD load stabilized and was sub-MOA. My 1/9 Rem 700 stabilized 80 grain SMK bullets but shit the bed on the 88's. They tumbled. Definitely right on the brink.

PB
 
TS2 said:
i put together a Super Varmint for a PD hunt I'm going on in June , started out factory then changed it up a bit
best groups are with 77's but 55 Vmax's are what I'll be shooting on the PD trip.

TS2

started with this
fuhTbRp.jpg


current status
gBydyA4.jpg
Click to expand...
Who makes that stock? I like my stock OK but for some reason I don't like the recoil impulse which is admittlingly a weird thing to say on a bolt gun. Not sure if its the 2 stage trigger or what, but its not the same as my REM 700 5R. It's just odd to me. And I have shot the shit out of the gun and still something bugs me.

PB
 
Pappasniper said:
Who makes that stock? I like my stock OK but for some reason I don't like the recoil impulse which is admittlingly a weird thing to say on a bolt gun. Not sure if its the 2 stage trigger or what, but its not the same as my REM 700 5R. It's just odd to me. And I have shot the shit out of the gun and still something bugs me.

PB
Click to expand...
I didn't care for the 2 stage on my tac a1.
Put a want to trade up for a single stage ad in the PX and had 5 people dm me in 10 minutes.

Much happier now that all 6 of my Tikkas are the same.
 
Hello,
yes it's a GRS Berserk , the for end has had a 1/4X1X10 plate added and has been filled
it's been pillared and bedded , and i just switch bottom metal to Atlasworxs Bottom Metal
and using Ruger & MDT mags. rifle weighs in a 16 lbs. have the factory trigger switched out the spring
and trigger set at 20 oz .
TS2
 
just browsing said:
Had a .223 barreled action sitting around so I picked up a cheap Boyd’s stock and decided to do my own take on a Super Varmint. Completely bedded and refinished.

Have since added Waters Rifleman 10-round mags and an SRS full length Arca rail. 75 ELDs around 2950 🤌🏻🤌🏻

View attachment 8375278
Click to expand...
Nice. That sorta looks like a Pro Varmint stock, although maybe the forend is different. I have a walnut PV and it’s super comfy. Having a CZ 17 Hornet installed in it and just got word that it’s done.

Noce paint job too. 👍
 
Last edited:
  • Like
Reactions: Charlie112
carbonbased said:
Nice. That sorta looks like a Pro Varmint stock, although maybe the forend is different. I have a walnut PV and it’s super comfy. Having a CZ 17 Hornet installed in it and just got word that it’s done.

Noce paint job too. 👍
Click to expand...

Yes you are correct - it’s a pro varmint. Picked it up as a project stock needing a lot of work… drilled out and installed pillars, cleaned up the inlet and recoil lug area, and opened up the barrel channel. Bedded the bottom metal and action with MarineTex, and then new paint on top of all that.

Works great now but it was a labor of love for sure. The SRS full length Arca fits great on the PV forend if you need something for it. Slightly radiused on the top so it sits nice and flush. Only spot it doesn’t is back by the magwell where it kinda steps down, but overall it’s impossible to tell.
 
  • Like
Reactions: carbonbased
just browsing said:
Yes you are correct - it’s a pro varmint. Picked it up as a project stock needing a lot of work… drilled out and installed pillars, cleaned up the inlet and recoil lug area, and opened up the barrel channel. Bedded the bottom metal and action with MarineTex, and then new paint on top of all that.

Works great now but it was a labor of love for sure. The SRS full length Arca fits great on the PV forend if you need something for it. Slightly radiused on the top so it sits nice and flush. Only spot it doesn’t is back by the magwell where it kinda steps down, but overall it’s impossible to tell.
Click to expand...
Was that rail installed in that pic you posted? I can’t see it…maybe it’s is countersunk (term?) down in there?

I had a Henderson or SRS 3-4” rail installed right in front of the magwell as I sorta hate a full-length rail. I want some wood to grab onto, ya know?

That reminds me, I gotta pick up the gun! The gunsmith just finished it.
 
carbonbased said:
Was that rail installed in that pic you posted? I can’t see it…maybe it’s is countersunk (term?) down in there?

I had a Henderson or SRS 3-4” rail installed right in front of the magwell as I sorta hate a full-length rail. I want some wood to grab onto, ya know?

That reminds me, I gotta pick up the gun! The gunsmith just finished it.
Click to expand...
No that was before I had the rail installed. Here it is with the rail. Kinda shows you what I was talking about in front of the magwell… there’s a little step-down that creates a small gap.

IMG_0059.jpeg

IMG_0060.jpeg


You could remedy that entirely by pushing the rail out further towards the muzzle. I just wanted the flat surface for bag stability.
 
  • Like
Reactions: carbonbased
just browsing said:
No that was before I had the rail installed. Here it is with the rail. Kinda shows you what I was talking about in front of the magwell… there’s a little step-down that creates a small gap.

View attachment 8375688
View attachment 8375689

You could remedy that entirely by pushing the rail out further towards the muzzle. I just wanted the flat surface for bag stability.
Click to expand...
Yeah, that little step down bit is where I snuck in that short rail. Thx for the pics!
 
You must log in or register to reply here.

Similar threads

P
Barrel lengths and velocity delta's, Tikka T3x Super Varmint 23.7 and Rem 700 5R 20' (223 Rem)
Replies
0
Views
149
Pappasniper
P
J
threading Tikka T3x superlite/compact?
Replies
10
Views
332
LuvDog
LuvDog
B
Tikka bolt interchange t3/t3x
Replies
3
Views
493
DeathBeforeDismount
DeathBeforeDismount
reid.hall
Surgeon 591
Replies
14
Views
483
Chris W.
C
S
Barrel questions about Tikka T3X TAC A1
Replies
28
Views
615
TheBigCountry
TheBigCountry
Top Bottom
Back