Had it turned at Southern Precision, Bartlein MOD400BB. I know there are those that do not like the cage. Kicks substantially more than my .338lm....
- Thread starter bunny too
- Start date
Ok, excuse my lack of knowledge but what is that "cage"?
I hope you have better luck in you AI with the 33xc then I did. Things were great 1st time thru the brass no issues. I annealed sized trimmed and then loaded up my rounds and went to the range. To my shock massive pressure issues and blowen out primers. I tried H-50BMG, RL-50 and 24N41 and it didn't matter. Turned out to be bad steel. The steel in the barrel look like 500-600 rounds hand been fire when I had only shot 122. The barrel company stood behind and offer to replace but I had had enough of 33xc and had the send me a .308 barrel which still shoots great. I have talked to a couple of other guys on the hide that had pressure issues.
I would like to hear how your progress is going with it.
I would like to hear how your progress is going with it.
you don't shoot at RedBull cans at a 2 miles away, and claim that you hit the can on the 1st shot do you?
post it on youtube good looking rig...
Yes, the 33xc eats barrels. I have had 338 LM AI barrels look great at 800 rounds w N570… 33xc w solids and N570 the throat moves a mile by the time you get to 140-150 rounds. Even w the modBB expect 500 round barrel life in our experience. I have one buddy using H50BMG and 2 barrels we use N570 w similar results on barrel life. Have a backup barrel sitting on the shelf.
We pay to play
We pay to play
How’s the recoil? Take you to pound town?
50 round plus shooting sessions no problem! The blast will get you before the recoil
Weight of rig? How long is barrel and diameter? Just curious.
I know this is on other threads, but what kind of performance numbers are we looking at? It is single feed only in axsr/axmc correct?
My buddy must be pushing his to hard than. I’m dedicated to N570
