Looking for some powder/charge ideas for the 6.5 PRC with the 100 eld vt. Thought it might make a pretty wild coyote round at about 3,400 fps or so. Thanks y’all.
6.5 PRC 100 ELD VT
- Thread starter Yoteski
- Start date
Look at Hammer bullets load data.
They have starting loads for their light bullets.
Should be close?
Hodgdon says Accurate 4350
Start at 55.2 max is 61.4 with Hornady brass, 100 gr sierra, and rem 9 1/2 primer. Max is reported at 64k psi
They have starting loads for their light bullets.
Should be close?
Hodgdon says Accurate 4350
Start at 55.2 max is 61.4 with Hornady brass, 100 gr sierra, and rem 9 1/2 primer. Max is reported at 64k psi
Loaded up some yesterday with n560 running 3465fps out of a 20 inch proof . I was pleased with accuracy and consistency ran out to a grand with no issues
You should have no problems getting north of 3400 fps with a prc. I get 3200 fps with a 20” creedmoor with excellent accuracy. Hopefully connect with a coyote soon to see how they perform.
63.8 of n560. That’s max according to them . I’d start lower and work up
I ran up to 60 grains of 6.5 staball. It gave me 3660 out of a 28" barrel. Definitely work up to this.
