Finally got my “MRGG-S at Home” out today. I’ll take that for factory Hornady 140 ELDM and shooting the group in about 45 seconds
Build list:
- SLR Reciever set
- SLR ION 16” handguard
- Area 419 mlok ARCA rail
- Grey Ops weight kit
- Craddock 22” Bartlein modBB 6.5 Creedmoor
- SA AGB
- Toolcraft BCG
- LaRue MB2ST
- Springco Green
- H2 buffer
- Zeiss LRP S3 6-36 ZF MRi
- Area 419 Mount 20 MOA
- SG Pulse
- ACCUTAC bipod
Build list:
- SLR Reciever set
- SLR ION 16” handguard
- Area 419 mlok ARCA rail
- Grey Ops weight kit
- Craddock 22” Bartlein modBB 6.5 Creedmoor
- SA AGB
- Toolcraft BCG
- LaRue MB2ST
- Springco Green
- H2 buffer
- Zeiss LRP S3 6-36 ZF MRi
- Area 419 Mount 20 MOA
- SG Pulse
- ACCUTAC bipod
Attachments
Last edited:
That’s how you shoot a group. Squeeze, settle the reticle and squeeze again, and repeat. None of this shoot one wait 2-5 minutes and shoot again and repeat.
I built it to shoot it matches where the COF is 15-20 shots in 90 seconds. Doesn’t doo much good to see how it groups with a full cooldown between shots.
If I slowed down a little I’m confident things would shrink to sub-MOA for a 10 shot.
Starting to feel like I'm struggling a bit.
20" Krieger M110, JP HP bolt, Aero M5 enhanced upper and handguard
Aero M5 lower, Larue MBT2S.
Small base die, bumping .004", Fed brass and CCI 250s. Trimmed on a Henderson.
The 169s show promise and the 175 Noslers as well. Looks like I need to back down on powder charges very slightly across the board. I also kind of suck at shooting a large frame gasser. I can shoot half minute with my bolt guns pretty regularly.
Shooting off a Harris and Protektor F class rabbit ears rear bag. PRS lite stock. Some of those fliers are me fighting with position. (Off a concrete bench), I did notice shooting prone things tightened up a bit.
Any thoughts, currently just loading everything to max mag length, haven't tried many powder charges but I would've thought with the Krieger I'd have se nice clover leafs with something at this point.
20" Krieger M110, JP HP bolt, Aero M5 enhanced upper and handguard
Aero M5 lower, Larue MBT2S.
Small base die, bumping .004", Fed brass and CCI 250s. Trimmed on a Henderson.
The 169s show promise and the 175 Noslers as well. Looks like I need to back down on powder charges very slightly across the board. I also kind of suck at shooting a large frame gasser. I can shoot half minute with my bolt guns pretty regularly.
Shooting off a Harris and Protektor F class rabbit ears rear bag. PRS lite stock. Some of those fliers are me fighting with position. (Off a concrete bench), I did notice shooting prone things tightened up a bit.
Any thoughts, currently just loading everything to max mag length, haven't tried many powder charges but I would've thought with the Krieger I'd have se nice clover leafs with something at this point.
Attachments
I have and shoot more than 1 Harris, so not knocking them.
Harris is tougher to load and has more hop than others. Esp on concrete.
an Atlas CAL or Accutac will likely shoot better.
Others probably too and havent used em.
Thats been my experience. Gas and bolt guns
Harris is tougher to load and has more hop than others. Esp on concrete.
an Atlas CAL or Accutac will likely shoot better.
Others probably too and havent used em.
Thats been my experience. Gas and bolt guns
Snagged this off the px changed a few things. Taking it out tomorrow to do some ladder tests.
Knights Manufacturing Company (Vero Beach) 1993 SR25 Match Rifle. All Black with no white lettering Military Match model with the 24” OberMeyer Match Barrel. Super Accurate.
Obviously all rifles are different, but ive had good success with the 168gr tmk out of the seekins i posted in here. IMR4064 42.7 and 43.1 were outsanding and single digit SD. I still plan on playing with seaing depth, but they shot very well. I had a stock armalite that shot the exact same 43.1gr 4064 load better than anything else i tried. All loaded to 2.800 at the moment. I tried the 169gr smk with the 4064 and the seekins didnt shoot it well at mag length. (1-1.5moa).
Aero M5 308 Receivers
20" Ballistic Advantage Bull Barrel 1/10 twist "Rifle Length"
Aero Adjustable .936 gas block & Aero Rifle Length Gas Tube
Aero 308 BCG -Nickel Boron
Aero M5 15" ODG R-One Mlok Handguard
Magpul ODG PRS lite stock
Vltor A5 7 position buffer tube
Sprinco Blue Carbine Length Spring
H3 Odin Adjustable Buffer Weight
Rise Armement Muzzle Brake
Larue MBT 2 Two Stage Flat Trigger
Magpul Extended Mag Release
Magpul K2-XL Grip
Aero Ambi Safety Lever
Vortex Venom 5-25x56mm EBR-7C (MRAD)
Weaver 34mm Made in USA Mount
Troy M4 Front & Rear Iron Sights
Slate Black Industries Mlok Rail Cover
KNS Anti Rotation Pins
Strike Industries Enhanced Bolt Catch / Release
"Sub MOA Accuracy"
20" Ballistic Advantage Bull Barrel 1/10 twist "Rifle Length"
Aero Adjustable .936 gas block & Aero Rifle Length Gas Tube
Aero 308 BCG -Nickel Boron
Aero M5 15" ODG R-One Mlok Handguard
Magpul ODG PRS lite stock
Vltor A5 7 position buffer tube
Sprinco Blue Carbine Length Spring
H3 Odin Adjustable Buffer Weight
Rise Armement Muzzle Brake
Larue MBT 2 Two Stage Flat Trigger
Magpul Extended Mag Release
Magpul K2-XL Grip
Aero Ambi Safety Lever
Vortex Venom 5-25x56mm EBR-7C (MRAD)
Weaver 34mm Made in USA Mount
Troy M4 Front & Rear Iron Sights
Slate Black Industries Mlok Rail Cover
KNS Anti Rotation Pins
Strike Industries Enhanced Bolt Catch / Release
"Sub MOA Accuracy"
Attachments
Last edited:
Similar threads
