• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Powders (H4350, H4831sc & Rl26) & MV's for 16" 6.5 PRC W/130's-140's?

xphunter

Sergeant
Full Member
Minuteman
Oct 17, 2005
340
64
Wyoming
How many here have 16"-16.5" (Even 17" info appreciated) a 6.5 PRC, shooting 130-140 grain bullets?
With these bullet weights in mind, I am considering H-4350, H-4831sc, and RL 26.
Actual velocities with the brass/powder/bullet combinations you have would be appreciated.
I have all three of the powders listed above.
 
How many here have 16"-16.5" (Even 17" info appreciated) a 6.5 PRC, shooting 130-140 grain bullets?
With these bullet weights in mind, I am considering H-4350, H-4831sc, and RL 26.
Actual velocities with the brass/powder/bullet combinations you have would be appreciated.
I have all three of the powders listed above.
I like RL-26 best out of a 16" barrel as it'll all burn before leaving the muzzle, the other powder's (as good as they can be) don't. 60.0 grs of RL-26 pushing a Berger 130 AR Hybrid with a COAL of 2.955 gets a velocity at 2794 fps. You're results will likely vary, so run a pressure test in you gun to determine where you should start your load development.
 
  • Love
Reactions: xphunter
I like RL-26 best out of a 16" barrel as it'll all burn before leaving the muzzle, the other powder's (as good as they can be) don't. 60.0 grs of RL-26 pushing a Berger 130 AR Hybrid with a COAL of 2.955 gets a velocity at 2794 fps. You're results will likely vary, so run a pressure test in you gun to determine where you should start your load development.

I was thinking R26 would be the secret sauce from the powders I listed-Thank you.
 
  • Like
Reactions: straightshooter1