Staball match in 223

King_beardsly

MMPRL & Low Dollar Precision

Full Member

Minuteman

Jun 12, 2018

1,760

825

Beast Coast

Friday at 12:55 PM

#1

• Friday at 12:55 PM

• #1

Does anyone have experience with Staball Match in 223 with 75gr class bullets in a bolt gun? I know there are a ton of recipes with varget but haven’t really found anything for Staball besides a random post here and there.

 

Last edited: Friday at 2:57 PM

st1650

Private

Full Member

Minuteman

Aug 13, 2009

2,670

3,088

38

Friday at 1:07 PM

#2

• Friday at 1:07 PM

• #2

25.8-26.5 for 77 TMK 2.465in
25.5 - 26.3 for Berger 80.5 2.495in
25.8 77 Scenar - 2.375in
That’s with a match chamber with extra freebore. These are midly hot loads and probably hovering around 58-60K PSI

I settled for 26.3 with the 77TMK and 25.8 with the Berger 80.5 and 25.8 with the scenar 77.
LC and Starline 556 brass and Lapua 223 brass.

 

• 

Reactions: Kaldor, King_beardsly and simonp

6

6.5SH

Two Star General

Full Member

Minuteman

Jul 24, 2020

6,473

11,660

Friday at 1:12 PM

#3

• Friday at 1:12 PM

• #3

King_beardsly said:

Does anyone have experience with Staball Match in 223 with 75gr class bullets? I know there are a ton of recipes with varget but haven’t really found anything for Staball besides a random post here and there.

Click to expand...

Staball Match

Just ordered a jug of Staball Match. Anyone already gotten their hands on some? Going to test 178/175gr in 308.

www.snipershide.com

 

• 

Reactions: King_beardsly

King_beardsly

MMPRL & Low Dollar Precision

Full Member

Minuteman

Jun 12, 2018

1,760

825

Beast Coast

Friday at 1:24 PM

#4

• Friday at 1:24 PM

• #4

6.5SH said:

Staball Match

Just ordered a jug of Staball Match. Anyone already gotten their hands on some? Going to test 178/175gr in 308.

www.snipershide.com

Click to expand...

I think that’s one of the threads I saw with the random smattering on 223

 

wpeach1912

Gunny Sergeant

Full Member

Minuteman

Supporter

Apr 7, 2020

994

846

Friday at 2:30 PM

#5

• Friday at 2:30 PM

• #5

My load with Hornady 75 BTHP, lake city 5.56 brass, CCI 400 is 25.0 grains at 2.250” COAL gets 2672 out of my 18” BA barrel. Same rifle gets 2650ish with AAC 77 SMK

 

Jack's Dad

Gunny Sergeant

Full Member

Minuteman

Dec 20, 2018

607

780

Friday at 3:07 PM

#6

• Friday at 3:07 PM

• #6

It shot accurately but on the slow side of my 223 bolt gun. Don't remember the load data. 75elds with Lapua brass

 

• 

Reactions: Lazyninja

st1650

Private

Full Member

Minuteman

Aug 13, 2009

2,670

3,088

38

Friday at 4:59 PM

#7

• Friday at 4:59 PM

• #7

Forgot to mention my speeds

At similar pressure 20in barrel 77gr defiance anTI
N540 2900-2925 FPS
Staball match - 2825-2850
Varget 2800-2825

 

King_beardsly

MMPRL & Low Dollar Precision

Full Member

Minuteman

Jun 12, 2018

1,760

825

Beast Coast

Friday at 5:25 PM

#8

• Friday at 5:25 PM

• #8

st1650 said:

Forgot to mention my speeds

At similar pressure 20in barrel 77gr defiance anTI
N540 2900-2925 FPS
Staball match - 2825-2850
Varget 2800-2825

Click to expand...

Solid speed, I loaded up from 24.7-25.9 after seasoning the barrel and was getting solid speed with low sd/es. Then I tested to see what once fired brass would do from 25.6-26.2 and got higher sd/es which I found a little weird.

 

J

joetuono

Private

Full Member

Minuteman

Sep 14, 2007

64

27

49

Northern Kentucky

Friday at 5:46 PM

#9

• Friday at 5:46 PM

• #9

I’m using 26 grains in LC brass with 75 gr ELD @ 2.495 COAL with Wolf SRM primers.

Barrel is 26 “ PVA Wylde chamber. Getting 2937 fps average; 10.3 S.D. For 10 shots. Same drops out to 1000 yards as 140 gr 6.5 CM.

Someone said this would be around 62k psi using GRT.

 

F

Franko

Major Hide Member

Full Member

Minuteman

May 19, 2018

1,581

2,229

Southern California

Yesterday at 12:38 AM

#10

• Yesterday at 12:38 AM

• #10

I have not been able to get enough powder into a case when using 77gr TMK's but have had some very promising test results with 73gr ELD-M projectiles. My testing was for an AR15 so I think Staball Match might work well for you as you are going to have a bit more room in the case due to loading longer than 2.255 for your bolt gun. When I can't find load data I have had good luck using Varget charge weights.

 

King_beardsly

MMPRL & Low Dollar Precision

Full Member

Minuteman

Jun 12, 2018

1,760

825

Beast Coast

Yesterday at 10:02 AM

#11

• Yesterday at 10:02 AM

• #11

Franko said:

I have not been able to get enough powder into a case when using 77gr TMK's but have had some very promising test results with 73gr ELD-M projectiles. My testing was for an AR15 so I think Staball Match might work well for you as you are going to have a bit more room in the case due to loading longer than 2.255 for your bolt gun. When I can't find load data I have had good luck using Varget charge weights.

Click to expand...

I want to try the 77 TMK’s since I’ve got the room to play around with since my current loaf is 2.495 and the sierra stuff seems to not care about jump. Plus I could use them for precision gas gun stuff if I wanted to.

 

F

Franko

Major Hide Member

Full Member

Minuteman

May 19, 2018

1,581

2,229

Southern California

Yesterday at 10:22 AM

#12

• Yesterday at 10:22 AM

• #12

King_beardsly said:

I want to try the 77 TMK’s since I’ve got the room to play around with since my current loaf is 2.495 and the sierra stuff seems to not care about jump. Plus I could use them for precision gas gun stuff if I wanted to.

Click to expand...

With TMK's I got the following results from my preliminary accuracy testing with a 22 inch bolt gun shooting virgin Starline 5.56 brass and CCI #41 primers at 2.250 COAL:

• 23.5 gr gave me 2578 FPS with an SD of 13 over 10 shots and it produced a 1 MOA group
• 24 gr gave me 2625 FPS with an SD of 12 over 10 shots and it produced a 0.5 MOA group

There were medium seating stem markings on the 24 gr load projectile so the case was pretty well filled. I ended up not going any further as the 8208 XBR test loads I was also testing gave me equal or better SD numbers and much more speed at the same price for powder.