Rimfire Rifle Photos Thread
- Thread starter keith jones
- Start date
Photo is of the top of the weight. Don’t have any profile pics (dropped off items for cerakote), but you’d understand when u see it .
Recently got into NRL22 and started with a Savage B22. After shooting a couple matches and seeing what other guys like @Shootin25 were shooting, I jumped into this.
Bergara B14R heavy 20” BA
MDT XRS
Trigger Tech Special
Vortex Strike Eagle 5-25x56 with scope chap
Vortex precision 1.26 matched rings with diving board
MDT 30moa rail
Wiebad creek pad
Sawtooth rifles arca rail
MDT mlok weights
Custom brass weight inside
Magpul bipod for now until I get a sky pod
Comes in at 17.2lbs and balances 2-3 inch’s in front of mag well
Shoots great and cycles perfectly with Eley match and CCI SV. Currently working on lot testing but being in CA, it’s hard to find match ammo to test.
Been wanting a 17 Mach 2 for a while, finally added one to the vault. Another Anschutz is always a good idea...both of these have beautiful stocks, which is a great bonus.
1502 I just brought home today, added a Leupold 3-9x33 EFR scope, DIP scope rail, Warne Mountain Tech low rings, changed out the single stage trigger it came with to a 5103 two stage set a 2#, and a D3 trigger shoe. I have a DIP machined trigger guard on backorder, (same as what I put on my 1416AV below). Can't wait to get it sighted in, I think it will make another fantastic squirrel rifle.
1502 (17HM2) and 1416AV (22LR):
LGS owner had all of the 17HM2 ammo he had on hand sitting on the table waiting for me to come pick up the rifle. He said nobody else uses it, and wanted it gone, so he gave it to me at his cost...and I bought it all.
1502 I just brought home today, added a Leupold 3-9x33 EFR scope, DIP scope rail, Warne Mountain Tech low rings, changed out the single stage trigger it came with to a 5103 two stage set a 2#, and a D3 trigger shoe. I have a DIP machined trigger guard on backorder, (same as what I put on my 1416AV below). Can't wait to get it sighted in, I think it will make another fantastic squirrel rifle.
1502 (17HM2) and 1416AV (22LR):
LGS owner had all of the 17HM2 ammo he had on hand sitting on the table waiting for me to come pick up the rifle. He said nobody else uses it, and wanted it gone, so he gave it to me at his cost...and I bought it all.
Last edited:
Bergara B14R 22lr in the 20 inch heavy stainless barrel mounted in an MDT XRS chassis with enclosed forend. Triggertech Diamond single stage and Vortex Strike Eagle 5-25x56 FFP mrad in MPA BA 1.25 high mount.
The gen 1 vudoo that MCR chambered with a Lother 12tw. Hope to really get into ammo testing playing and shooting soon.
My first "fancy" rimfire. I primarily use it to shoot gophers. I see I am going to have to do some reading on how to get this thing to feed flawlessly. I didn't even notice the magazines had an adjustment on them and I took it out and promptly wedged a shell in there pretty good. It shoots amazing though, I am just shooting some 40 grain CCI and they shoot in one hole at 50 yards. It is a RimX in a XRS chassis. Leupy MK 4
Got my new 1502 to the range and sighted in. Tried both CCI and Hornady, Hornady was a little better...but I only shot at 25 yards, so it's not much of a distance to make a judgment off of. One thing for sure, when you miss a little it looks YUGE since the projectile is so tiny. Five round group circled, not too bad. I'm definitely happy with it.
This one has been a journey, but rewarding to have it done:
RimX
Foundation Samson
Zeiss S3 6-36
26in Proof Comp
TT Trigger
RimX
Foundation Samson
Zeiss S3 6-36
26in Proof Comp
TT Trigger
Yesterday was first day out with it. Just under MOA out to 200yds with center x
@Jagerwerks you lucky folks with all that property to play on!
Also, nice rig (albeit left handed
) !
Costa Del Mar’s maybe….
Also, nice rig (albeit left handed
) !Costa Del Mar’s maybe….
CZ 457 Manners
Vortex 6-36 Gen 3 Razor
Lilja 26 x 1 barrel
Timney trigger
Area 419 weighted ARCA & scope rails bolt knob.
L3I bottom metal, magazine well/release, magazines.
Vortex 6-36 Gen 3 Razor
Lilja 26 x 1 barrel
Timney trigger
Area 419 weighted ARCA & scope rails bolt knob.
L3I bottom metal, magazine well/release, magazines.
Just think, 32 years ago, I sold my farm to build this@Jagerwerks you lucky folks with all that property to play on!
Also, nice rig (albeit left handed
Costa Del Mar’s maybe….
Looks like the dog wanted to learn about precision rifle marksmanship as well
Looks like the dog wanted to learn about precision rifle marksmanship as well
So long as the dog flossed afterwards!
