• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

BR Mag Extensions

Hoyt7mm

Bow Shooter
Supporter
Full Member
Minuteman
Apr 6, 2017
917
275
Wisco
What companies make mag extensions for AICS patterns mags with BR spacer kits? I know of Altus & Freedom gunworks, but both are sold out.

Has anyone tried to modify standard extensions like the 419 to work? I'm wondering if I could take a piece of spacer/guide and epoxy it into a 419 extension or similar.
 
I've been using the MDT 12 rounders with and without the spacer kit and love them. I happened to put on a 419 on a non spacer mag and like the added ease of loading 10-12 when needed.

After some google-fu I was able to find a CK base pad in stock so I'm going to give that a try
 
  • Like
Reactions: kthomas
I built a "shelf" with Sugru in my Seekins +4 AICS mag extenders.

IMG_20200511_112015.jpg


IMG_20200511_112026.jpg


Seems to work well. However, I've since moved on to the MDT 12 round BR mags, seemed like a more dedicated fit for purpose mag for what I'm doing. So far I'm pretty happy with them, but only have a few hundred rounds with them.
 
  • Like
Reactions: Hoyt7mm
I haven’t had any issues getting 10-12 in my MDT’s, granted they get a little tight putting the last few rounds in.
 
Edited so I didn’t steal this guy post.


I have freedom Gunworks and Altus mag setups both kick ass and work great. I’d reach out to Bobby at freedom to see when he will have more ready
 
I haven’t had any issues getting 10-12 in my MDT’s, granted they get a little tight putting the last few rounds in.

The springs on the MDT's certainly come pretty stiff from the factory. Have never tried putting more then 10 in yet, but they are tight at 10.
 
  • Like
Reactions: SMC21