• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Gunsmithing Is there a stock doc here?

USMCsean

Former Jarhead
Full Member
Minuteman
  • Feb 22, 2014
    481
    289
    Ohio
    I have a USMC A4 spec stock with a Gen II, single screw cheek piece. I have the hardware for a Gen I, two screw cheek piece. My M40A3 is 100% correct, except for this feature.

    I need someone to do it. McMillan is not doing this conversion anymore. Unless someone here has a buddy there who can do it, I am forced to find someone else to do the work. Is there a qualified person on this forum who can do the work?
     
    Even if they did do it, I would find someone else. I have an older A4 stock with the original "two-screw" and all they use is a couple of helicoils in each side of the fiberglass stock. They eventually came loose and unscrewed from the glass. I wasn't worried about authenticity so I drilled them out and epoxied some threaded inserts.