• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Official (DTA) SRS, HTI, Covert, Hunter Thread

I'm out since July on mine. I called and he said it would be done this week so we'll see!
 
  • Like
Reactions: TMR137
Finally got some time behind my SRS - post lockdown .
Zeroed my Steiner M7Xi 4-28x56 msr2 , really really enjoyed my time behind it . very easy to zero , and comfortable to stay behind .
Parallax was easy to set and the MSR2 reticle is quite nice for precision stuff
 
So I’m looking at getting my next DT barrel, and I’m thinking of a 300 magnum in a contour resembling a truck axel and finished in the 28-30ish range. The only application would be ELR and maybe some LR coyote and pig hunting if we are shooting from the truck. I am thinking about sticking with a Cherry Bomb break, so I have the option to put my Thunder Chicken on it. Have any of you tried a set up like this? Any tips on what works vs what I should avoid?
 
^^ pretty self explanatory. Get a straight barrel at your desired length and stick your can on the end. Been done lots of times.
 
  • Like
Reactions: Edgecrusher
^^ pretty self explanatory. Get a straight barrel at your desired length and stick your can on the end. Been done lots of times.
Of course, but I’m thinking about things like if the difference between a straight taper at 1 inch diameter Vs 1.25 inch diameter makes any meaningful difference in heating or harmonics. Did someone try a shank diameter barrel? This system has a good deal of nuance to it, and I’ve found that I can avoid making bad decisions by trying to explore the nuance before making purchases.
 
  • Like
Reactions: Joebill
I don't think it would make much difference, aside from recoil reduced from added weight.
 
I had a straight tube 1.25” 29” 300 Norma barrel made that weighed about 9.5 lbs. I think that put the gun at a total of 23 lbs or so. The 300 Norma didn’t recoil much and you don’t need a brake. I ended up selling it because I lost my long range spot.
I ended up picking up a 300 Win Mag barrel to replace it and have been pretty happy with it.
 
Last edited:
ES-Tactical has a couple of 6.5 creedmoor barrels, a 6creed and a 300 PRC in stock and ready to ship for great prices if anyone is looking. I just grabbed a covert barrel from them!

 
  • Like
Reactions: Edgecrusher
So I’m looking at getting my next DT barrel, and I’m thinking of a 300 magnum in a contour resembling a truck axel and finished in the 28-30ish range. The only application would be ELR and maybe some LR coyote and pig hunting if we are shooting from the truck. I am thinking about sticking with a Cherry Bomb break, so I have the option to put my Thunder Chicken on it. Have any of you tried a set up like this? Any tips on what works vs what I should avoid?
I would call SAC and get a 300 lapua imp done up
 
ES-Tactical has a couple of 6.5 creedmoor barrels, a 6creed and a 300 PRC in stock and ready to ship for great prices if anyone is looking. I just grabbed a covert barrel from them!


Hopefully mine from July is done soon
 
Well I’ve been really wanting a Covert setup for “lighter” weight rig for hunting. So I started out just wanting an A1 Covert hand guard for SRS A1... which then turned into wanting to sell my A1 for the A2 because it’s lighter.. which turned into me keeping my A1 and ordering an A2 covert with two conversions....

My friends and family say I need to attend GA..... Guns Anonymous... but I don’t think I have a problem.

SAC is doing the build, same MultiCam Shadow coat... debating on either a ZCO420 or TT315P for the top

- DT A2 Covert
- Proof Carbon 18” 6.5cm 1:7.5” twist
- Bartlein 16” 450bm 1:16” twist
 

Attachments

  • AFCF295F-2E37-4897-9D24-34A1429496CD.jpeg
    AFCF295F-2E37-4897-9D24-34A1429496CD.jpeg
    214.2 KB · Views: 135
  • 06FDC676-18E3-445F-A779-F0DBE5749A1B.jpeg
    06FDC676-18E3-445F-A779-F0DBE5749A1B.jpeg
    220.7 KB · Views: 132
I was in between the 300 Norma and the 300 WinMag. Have you had good luck with the 300 Lapua Improved?
I haven't personally but it is a proven cartridge and is likely the biggest 30 cal you could feed from the mag in a srs. I have a 300NM that I am about to start playing with, but its a 18" barrel.
 
Anyone have some load data they're willing to share for DT 338 lapua factory barrel shooting Berger 300 gr otms on top of N570 + Fed 215Ms? I'd also be interested in what jump or jam people are finding good accuracy at with the bergers in the factory barrel. Cheers!
 
92.7gr N570 loaded at 3.735" has been my go to .338LM load with 300 OTMs in the factory 18" and 26" barrels.
 
I no longer have that barrel, but if I remember correctly it was around 2750fps
 
  • Like
Reactions: fujam
What size rings y’all running with a 56mm and 50mm objective? Looking for some ARC m10 rings for some ZCO’s, don’t want to be jamming my fat cheek down in the gun.
 
Definitely 1.5 or higher for comfort personally. I wouldn’t mind something higher than the 1.5 I have now with my fat face.
 
  • Like
Reactions: HenryTheAce
Yeah gonna have to go mount. Thanks for the help fellas. I was concerned the 1.42” rings would be too low. I’ll go with a mount 1.5” or higher
 
IMG_1195.jpg

A day will come soon when people in this thread will ask "hey, what's that thing?"
 
It's the special tool you needed to change handguards on the early model SRS.
 
Anyone purchased directly from DTA recently and if so what has your experience been? I purchased an item with an ETA of 4 weeks but I’m beginning to wonder if I should have any reason to be concerned.
 
Kind of random- I’ve got an aftershock brake threaded 3/4 x 24 that came with a 7 wsm barrel I bought from a guy recently. I run a TBAC CB setup so I have no use for it, and this group of rifle owners is probably one of the few that might actually use it.

someone hit me up with an offer like “I’ll give you 2 bags of skittles and 3 PCs of used .223 brass” and I’ll send you the brake. Or whatever- I could also use an extra 1.5”30mm Mount or another magazine if someone wanted to trade to me and I’ll send cash.

Ok, back to your regular programming. carry on.
 
Finally got a chance to get behind the srs. Did some barrel break in with my 223 conversion. Really liking this platform so far.
 

Attachments

  • 20201205_121708.jpg
    20201205_121708.jpg
    542 KB · Views: 147
  • 20201205_121914.jpg
    20201205_121914.jpg
    551.9 KB · Views: 146
I’ve got an early Gen 1 and have been seriously considering getting an A1 or A2. Which do you prefer and why?
 
I’ve got an early Gen 1 and have been seriously considering getting an A1 or A2. Which do you prefer and why?
Very hard to say. I like the A1 trigger better. But I have a 22.5” 6.5 creed with proof research barrel that I love in my A2 because it’s so lightweight. I also prefer the mlok rail on the A2. I guess I lean toward the A2, unless you plan to spend all your time on the range, in which case the weight of the A1 is an advantage.
 

Attachments

  • 3E06E3DB-F485-43FD-AD12-F689038700E3.jpeg
    3E06E3DB-F485-43FD-AD12-F689038700E3.jpeg
    561.2 KB · Views: 153
I’m having them build me an A2 covert with a black shadow MultiCam pattern. Excited to get it in 5-6 months lol
That pattern is awesome. Might be quicker than you think. Please post a pic when you get it.
I’ve been thinking about a covert handguard. Are they available anywhere?
 
That pattern is awesome. Might be quicker than you think. Please post a pic when you get it.
I’ve been thinking about a covert handguard. Are they available anywhere?
I don’t know of any. I’m sure there’s some. Maybe special purpose rifle? SAC said about 2-3 months for the covert hand guard, 4 months of so for a Bartlein 450bm barrel, and 6 months or so for a proof carbon in 6.5cm. Sucks it’s gonna take so long. Had to settle for a 16.75” 6.5cm proof cf barrel since they’re not taking special orders at the moment (I wanted an 18”)
 
Has anyone received a barrel from ES tactical lately? I'm coming up on 5 months.
 
I am in the same boat. I am a little disappointed they have basically the same barrel I ordered in August for sale on their website.
I am waiting on a rifle build as well. Sadly I have not heard from him in a while.