No problem. Happy to help.
- Thread starter CanSniper
- Start date
Is it possible to run PVA's 122gr. Cayuga in 6.5 PRC at short action mag length? I've been unwilling to keep on buying factory ammo, and I've got alot of H4831SC on hand.
If that's not a great idea, what lightweight bullet is a good choice for hunting use in WSM AccurateMags? Rifle is a Short Action Customs built Origin.
If that's not a great idea, what lightweight bullet is a good choice for hunting use in WSM AccurateMags? Rifle is a Short Action Customs built Origin.
I’ve hunted 124gr Hammer Hunter this season. Two does head shots at 95 yards, one buck at 85 yards lung heart shot. He turned 180 deg and went straight down, complete pass through. Second buck at 90 yards heart shot, did a mule kick ran 40 yards, pass through.
Buck had minimal meat damage with lungs and heart destroyed.
These are 2,800 fps at the muzzle and I wouldn’t hesitate to use on larger game or distance.
Pretty accurate with H4831 out of Tikka running CTR mags
I'm going to be trying 135 A-Tips in the next week or so. I'm going to try IMR 7828 SSC. I think you could probably send them with H4831SC also. I think I'm going to be able to get them to 3,100 FPS with a 26 inch barrel. Should be pretty good for deer.
Sounds like what I'm looking for as well, something 3100+ with lower recoil. Are those A Tips a secant type ogive like the ELDM/Xs? I'm curious as to what length/style of bullet is realistically gonna work and feed well in short action configuration.
Thanks for the info. Is it possible to run these faster, or were you seeing pressure? Maybe not a 26" barrel..
The A-Tips are probably some type of hybrid profile. The 135's should be short enough to fit mag length easily.
I’m running these out of 16.5” barrel and they’re about 80 fps faster (going by memory) than 123 gr Nosler CC with same charge, but you can run them faster than conventional bullets before getting into pressure due to lower bearing surface.
I was looking for shorty hunting do most rifle with long barreled 260 rem performance
Look in the “data” highlight on my Instagram profile.
Sorry, I'm not on Instagram. This is it for social media for me. Thanks tho.
From his instagram, dont think you need to have one yourself to look at it https://www.instagram.com/primalrights/?hl=en
I’m going to load up some 153.5 Bergers with 8133 tomorrow. Where did you settle on this load?
I used this combo this year on a mountain goat, and two elk. Worked well on all 3. Shot ranges were a couple in the low 400s, and the goat was further than that. All one shot kills, even though I shot my goat one more time just to make sure. Pretty good blood trails on all 3, which I am not used to. Great rifle and ammo combo to shoot, and just about perfect for 99% of the rifle hunting I do.
Looking for advice. I'm wanting to build a 16.5" 6.5 PRC. Would I be able to shoot 156gr in a bbl that short? Would it depend on the twist? Do I need to go 18+ plus if just shooting factory match ammo instead of hand loading?
It's going to be a hunting rig shooting no more than 400 yards unsuppressed. Just wondering what my options are.
It's going to be a hunting rig shooting no more than 400 yards unsuppressed. Just wondering what my options are.
Last edited:
I’m shooting 156’s in a 20” with H1000 and getting 2710. It is a very safe/conservative load. At 16” you could expect 2500-2600 depending on how hard you want to step on in it.
Anyone using VV N560 behind Berger's 144gr LRTH (COAL 2.950)? I've got a 27" barrel and think I can get at least 3050-3100 fps from that combo.
Still looking for 16.5" info as well
Assume that a 16.5” to 18” will give about the same speeds as a 24” to 26” 6.5 Creedmoor. For example the 130 Bergers out of my 18” 6.5 PRC give me around 2950 fps. That would put your 156gr around 2700 fps so a 7.5 or faster twist would be ideal.
If you give me load components (bullets, powder, COAL), I can run Quickload and give you some ballpark info like pressure and velocities.
Has anyone tried the new Staball HD with 147 ELD-M?? I see most are using RL26 or H1000. Just wondering if anyone is getting good/great accuracy from the new Staball powder.
I've only used RL26, H1000 and VV565. Please post results if you try it out. RL26 is my go to but I have not seen it in a few years
RL22 and 23 also work well. The problem is 147 ELDMs come apart in mid air. Especially at 2900 fps and higher.
Hornady 147 gr ELDM
Rx 22 52 gr
Hornady brass x 1
Fed 210
COL 2.030
COAL 2.940
2886, 2872, 2881, 2880, 2900, 2876, 2883
1” group, no pressure signs
Hornady 147 gr ELDM
Rx 23 52.5 gr
Hornady brass x 3
Fed 210
COL 2.045
COAL 2.940
2934, 2934, 2934, 2938, 2934
0.75” group, mild plunger pressure ring
Hornady 147 gr ELDM
Rx 22 52 gr
Hornady brass x 1
Fed 210
COL 2.030
COAL 2.940
2886, 2872, 2881, 2880, 2900, 2876, 2883
1” group, no pressure signs
Hornady 147 gr ELDM
Rx 23 52.5 gr
Hornady brass x 3
Fed 210
COL 2.045
COAL 2.940
2934, 2934, 2934, 2938, 2934
0.75” group, mild plunger pressure ring
I’ve had the same problem with 147 ELDM’s coming apart also. I’ve stopped using them
Has anyone seen the same thing with the 142gr Nosler ABLR? It’s a really soft bullet but it’s bonded.
