Search results

  1. T

    Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    These are not the cheaper plastic tipped rounds, but the BTHP that have been impossible to find lately (model 82306 not 82300) 4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my...
  2. T

    Different sight for an AK47

    Yea, I've narrowed it down to either Midwest or AK Master Mount. Any pros/cons As for the scope itself, I will likely go with the primary arms 3x.
  3. T

    Different sight for an AK47

    I am comfortable shooting with iron sites.....I didn't have a problem hitting the 4" gong at 100 yds at the range after sighting it in. (Which is a huge target compared to what I'm used to for bolt actions ha) We still have a fire hazard in effect here in AZ so I haven't had a chance to take it...
  4. T

    Different sight for an AK47

    Thanks for the recommendation. I will check out Rob Ski. How is the Primary Arms stuff compared to Vortex? I have alot of respect for vortex as I have had a few of their items, but no experience with PA.
  5. T

    Different sight for an AK47

    I finally bought my first AK (PSA ak-47 GF4) after sticking to mostly bolt actions and AR's. Any recommendation on what kind of sight and mount (AK comes with side mount ready for something like a midwest industries mount) to put on this this? Here are a few requirements: 1. I would like...
  6. T

    Any argument to be made for picking up a rifle in 7.62x39?

    Tell me about it. I've never really been interested in AK's and stuck to bolt actions and AR's. I decided to get my first AK and turns out it's the worst time. I have been watching PSA like a hawk and was able to snag a PSA ak47 GF4 this week. Then I start looking for ammo and all the shelves...
  7. T

    Buying NFA items like an M60

    Thanks I did find 2 or 3 of the largest sellers, as you did, by google searching. But figured there were a few other places. I did find a few other places since. But advice from experienced individuals before spending 60k is always appreciated!
  8. T

    Buying NFA items like an M60

    --- I know this isn't a suppressor, but there isn't a forum for MG's that I found and this seems most related as it is an NFA item --- I am considering buying a transferable M60 (and/or maybe an m16). I've got the transfer part figured out from my suppressor experience. Does anyone experienced...
  9. T

    Sharpening your blades?

    I've got an edge maker pro system that works ok on my kitchen knives, but I think my blades are too thick (and possibly require the correct edge angles?). Whats a good system thats pretty foolproof and not too time intensive to keep a sharp edge on...
  10. T

    Sharpening your blades?

    OK guys, so I tried using the sharpmaker and I am glad I bought my DMT bench stones. I used it on my Chris Reeves that had a few dinges in the edge itself. I spent 20 minutes trying to take enough material off to get the dinges out and barely made any progress. So I moved over to my x-coarse...
  11. T

    Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    These are not the cheaper plastic tipped rounds, but the BTHP that have been impossible to find lately (model 82306 not 82300) 4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my...
  12. T

    Sharpening your blades?

    Just wanted to give an update. I used the DMT stones to reprofile my Wusthof chef's knife to 15 degrees and sharpen it through all the stages. WOW. It took me about 3 hours to do as it was a bit of a learning curve at first. But after I got the hang of it and finished, it was scary sharp. I...
  13. T

    Sharpening your blades?

    Alright guys, thanks for all the advice. I've decided to bite the bullet and just go old school. From all my research, I've came away with the following idea. It seems like alot of the systems have bases of people that are happy with it meanwhile everyone else heavily critiques them. Wicked...
  14. T

    Sharpening your blades?

    OK, if I spring for a Wicked edge system, is the WE100 good enough? Will the Wicked Edge system be better than getting some big 10" DMT diamond stones and an angle guide ?
  15. T

    SOLD AI AIAX 6mm Creedmoor Brux Barrel

    I am selling a Barrel that came with the 2014 SA AX I bought that the previous owner used but I never used. Here is all the info I have on it: 26" 6mm Creedmoor Brux Barrel Threaded 5/8-24 Comes with a Blast Tamer Brake 1/8 twist .237 Brux Heavy Varmint Contour ~300 Rounds through the tube...
  16. T

    Sharpening your blades?

    I've got a small divot or two in the edge on my Chris Reeves, will any of these take off enough to get that out?
  17. T

    Sharpening your blades?

    I would be willing to spend $100 if it was fast, effective and easy to use. But a quick search didn't turn anything up. All I found was good sets that have a steep learning curve to use (needs to be hobby to use effectively). Edit: Obviously an easy and not too expensive system would be best!