Search results

  1. D

    Electronic powder dispenser

    I bought the Lyman GEN 5 Digital Powder System and have no regrets at all. haven't had any problems since day 1 and it weighs loads just as quick and precise as the RCBS CM. the only problem I have is I can't hear the beeper but that would be true for all models of electronic powder dispensing...
  2. D

    Rifle Scopes Millet 6-25x56 VS SWFA Fixed 16

    not really, moved them all around on different guns until I decided I had them mounted where I like them. the lrs is on my 6.5creedmoor which I shoot out to about 550-600yds and the ss16x is on my 243ackley improved. what ever gun I want to shoot at the time is my favorite scope! the clarity on...
  3. D

    Rifle Scopes Millet 6-25x56 VS SWFA Fixed 16

    I have the ss 16x scope, 2 millett trs-1's and 1millett lrs, the mil setting for my lrs is 12.5x. I believe them all to be very good quality scopes for the money and haven't had any problems with any of them. the millett lrs power ring took some use before it started to loosen up, brand new it...
  4. D

    223 loads for long barrel

    I had been trying imr 4895 and it seems to be a good match for the 68grn hornady match. this was shot at 100 yds from my Savage varmint contour barrel (9 twist). since then I found some more varget and went back to it.
  5. D

    6.5 creedmoor ocw test

    myself, I would go with this 42.9 load and play with the length, maybe start moving it out in increments of .010 and see if it doen't pull together. just mho.
  6. D

    Camera Land's One Day Vortex Event Wednesday July 31st

    would have been nice to be on the 1st of the month when I have money!
  7. D

    Rifle Scopes Vortex Viper HS-T

    if it makes a difference I have heard that these do not have etched glass reticles like the PST.
  8. D

    Loading for first OCW test. Does this look right?

    thank you, probably would never have found it.
  9. D

    Loading for first OCW test. Does this look right?

    well, I wish I could find that thread, I have been looking all over the place and can't seem to find it. do you know who made it?
  10. D

    Loading for first OCW test. Does this look right?

    I follow Dan Newberry's rules to the T. what I can see you have got it right. usually takes 24-30rnds or so. I like to load extra siters so I have some foulers, I clean my barrel after each set.
  11. D

    Ladder test

    it doesn't sound like you followed this step exactly. if you did you would have fired shots of the same grainage all on one target, then the next target would have the same grainage + .5 grain and so forth for the remaining targets. I hope this makes sense as I am explaining it. 11. After you...
  12. D

    Load development question. bullets

    for myself I start with 1 box of 100 to see if my rifle even likes it. then if it performs well or seems like a possible candidate for a good load I will buy the larger 250 or 500 box. that way you have all bullets from the same batch.
  13. D

    Gunsmithing Need help from those who make their own pillars.

    I have bought pillars and made my own. I have found the best and cheapest to use is threaded "lamprod". you can get it from any hardware store or even tear apart an old lamp(not the wifes favorite). the threads help with the bonding between the stock and pillar and really works great. here's an...
  14. D

    Pmags-$20

    i'm new to the forum and can't post this in the classifieds so here it is. Smith and Wesson's store has Pmags(30rndrs) for $20 each. i bought the two i wanted for personal use and fun. hope some of you can get some before they run out!
  15. D

    Rifle Scopes Budget scope for 700 SPS

    Re: Budget scope for 700 SPS <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SniperJoe</div><div class="ubbcode-body">Insted of starting a new thread,,,,,,,,,I have a question relating to a 700 and a scope. I just picked up a 700 Tactical AAC SD and a Bushnell...
  16. D

    Headspace Help. What's Going On?

    Re: Headspace Help. What's Going On? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: FLIGHT762</div><div class="ubbcode-body">Was it re-chambered at some point to .223 Ackley Improved? http://www.6mmbr.com/223rem.html </div></div> you would be able to tell by...
  17. D

    Gunsmithing Bedding compounds

    Re: Bedding compounds JB weld, just did a stock using this stuff and i think it's great!
  18. D

    Gunsmithing Any recommendations for a gun vise?

    Re: Any recommendations for a gun vise? i wanted the Tipton "BestGun" vise but my brother got me the Lyman for my birthday and i'm happy with it. like all the least expensive models it is made mostly of plastic. you can lock your weapon in it securely and it can be rotated about 45* one way...
  19. D

    Gunsmithing Bedding a rifle. Do it yourself or go with a pro?

    Re: Bedding a rifle. Do it yourself or go with a pro? did my first pillar and bedding job all at once the other day andd it came out much better than i was expecting. i took care to pay attention to the small details and scuff up the stock and plug all places where u don't want the mix to get...
  20. D

    Gunsmithing How to dull the finish

    Re: How to dull the finish krylon has a matte finish, just spray it on lightly and you have the dull finish you want. you will want to prep your stock with something to remove all dirt and grease(i use 91% isopropyl alcohol),this will not harm your original finish on the stock. 1 can is...