• The site has been updated!

    If you see any bugs, please report them in this thread.

    VIEW THREAD

Search results

  1. BHP9

    CHRONO HELP

    Re: CHRONO HELP I have been using a PACT Pro for about 8 years now and love it. No problems with the unit at all. I highly recommend it. Now all I have to do is stop shooting the skyscreens.
  2. BHP9

    Low power 338LM load???

    Re: Low power 338LM load??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oneswithfunes</div><div class="ubbcode-body">Mmmmm hang fire. </div></div> Or worse - DETONATION.
  3. BHP9

    Gunsmithing pistol sight pushing

    Re: pistol sight pushing If you are going to do a few sight replacements, then get the tool. If it's only a one off, then either have a 'smith do it or chance using a brass rod 3/16" in diameter. I've found that aluminium leaves marks that are more difficult to remove that brass.
  4. BHP9

    Gunsmithing wolff spring kit

    Re: wolff spring kit probably for the safety.
  5. BHP9

    >338 Lapua brass

    Re: >338 Lapua brass .338LM anything and cheap doesn't exist. Once fired bras is running between $1.35 - $1.50 each.
  6. BHP9

    decapping 338 LM

    Re: decapping 338 LM +1
  7. BHP9

    reloading for 338LM with Varget

    Re: reloading for 338LM with Varget <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: samson</div><div class="ubbcode-body">Oh yea, Bullseye will work grrrrreat and save you lots of money on powder too. Hmmmm, let see, about 15 grains per reload and a pound is...
  8. BHP9

    reloading for 338LM with Varget

    Re: reloading for 338LM with Varget Varget is way too fast for the .338LM. Use powders like H1000, Retumbo, RL25 etc.
  9. BHP9

    M118LR Powder

    Re: M118LR Powder <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flyinrl</div><div class="ubbcode-body">I've heard 44grs of RL-15 is the load. To get that in Varget you'll have to take into concideration case weight and primers(good luck finding GGM primers)...
  10. BHP9

    Any one reload for the .40 S&W

    Re: Any one reload for the .40 S&W <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 7mmAM</div><div class="ubbcode-body">4.3gr Tightgroup and 180 montana golds in our Glock 35's </div></div> +2 on this load for my G35 and STI Trojan.
  11. BHP9

    338 Lapua Prvi Partizan Brass

    Re: 338 Lapua Prvi Partizan Brass The new Prvi Partizan brass is thin, but I can't say for the .338LM, but go good or don't go. Hornady is good but go with the best - Lapua. I'm at 10 reloads now and no stretching nor trimming at this time.
  12. BHP9

    Gunsmithing Would like to hear from owners of Rifle Basix

    Re: Would like to hear from owners of Rifle Basix Had 2 of them for 3 years now, both set at 3.5lbs. GTG. You won't be sorry.
  13. BHP9

    Gunsmithing PGW Barrel Fluting

    Re: PGW Barrel Fluting <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bigg_sexy1</div><div class="ubbcode-body">Hello all, I am starting a new build, and I was wondering if anyone knew the rate of twist of the fluting on a PGW barrel. I am building a 7WSM on a...
  14. BHP9

    Gunsmithing Flush cup positions???

    Re: Flush cup positions??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fe1</div><div class="ubbcode-body">That makes sense but why are there so many on a MilSpec A4? </div></div> I have 2 McM A5 stocks and they have 5 cups. This gives the carrier (porter)...
  15. BHP9

    Gunsmithing Remington 740 front sight????

    Re: Remington 740 front sight???? Using a sight pusher remove the front sight. There should be a screw underneath.
  16. BHP9

    Gunsmithing .338 Lapua Magnum **Pics Added**

    Re: BIG-BLACK-HEAVY-NASTY BASTARD Very nice Bill.
  17. BHP9

    Moly or Naked

    Re: Moly or Naked The 2 main reasons I don't go moly are 1. Moly is hygroscopic (absorbs water). 2. It's a bear to remove from the barrel.
  18. BHP9

    Reloading for 339 Lapua 95 grain Retumbo

    Re: Reloading for 339 Lapua 95 grain Retumbo I've used Retumbo, but I'm not at home and won't be for another 2 or 3 days.
  19. BHP9

    my 243 wont chamber empty cases

    Re: my 243 wont chamber empty cases What type of gun was the brass fired in? Get some unfired brass, size and try to chamber. Also try chambering a factory loaded round.
  20. BHP9

    Advanced Marksmanship Free Book Offer

    Re: Free Book Offer Whoever gets this book won't be sorry. I bought it about 15 or so years ago and it great. It mentions a club, I was President of the pistol section, (Stittsville) that the wind was a bear, and I can attest to this.