Search results

  1. T

    Private party NFA transfers

    This is regarding in-state NFA transfers (Arizona). I know that technically all you have to do to do for a private party transfer is a form 4. The issue is that you are stuck in a limbo state where for a year the seller has both the item and the money or the seller has to trust a stranger will...
  2. T

    Changing combo on AMSEC safe

    I have an AMSEC safe with mechanical dial. I've changed the code on my s&g dial (6730) before and have a change key (U8) for it. Does anyone know if it is the same change key for AMSEC safes and if I could follow the same processes? Or is it different?
  3. T

    Withstanding the heat?

    Not really sure where to put this thread, but since my bolt actions are my most prized firearms, I figured here is good as any! Plus, my precision bolt rifles are also the firearms where imperfections would end up mattering the most. Outside of the added theft risk, is there anything to worry...
  4. T

    Room needed behind safe

    I am Installing an amsec bf7250 soon and I can't find any information on the room needed behind the safe if you want to plug the power cord up to it. You would think there would be even 1 picture or video somewhere on the internet that showed the back of the safe (or even any other safe in the...
  5. T

    Leveling big safe

    I'm getting a BF7250 installed on concrete and the last thing I have to figure out is whether I should level it. It is in the corner and I am guessing for drainage reason, there is a slight angle towards the door and towards the hinge. I think if the angle was in literally the opposite...
  6. T

    Drilling through back of safe

    My house is on a post tension slab, so I can't bolt the safe into the concrete (not safely and easily atleast). What I did to my last safe is drive 2 big bolts into the wall studs behind it. My new safe is a much more "serious" safe though, amsec 7250hd. I'm sure I can drill through the back of...
  7. T

    Hiding a Safe in an exposed room

    I am getting a very nice large safe from a business liquidation. The issue I have is that it is so big that I won't be able to get it into the nice hidden area I have now for my current safe. The only place I can get it to fit is into a corner of my man cave. The problem is the room is...
  8. T

    Accessories Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    These are not the cheaper plastic tipped rounds, but the BTHP that have been impossible to find lately (model 82306 not 82300) 4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my...
  9. T

    Rifle Scopes Different sight for an AK47

    I finally bought my first AK (PSA ak-47 GF4) after sticking to mostly bolt actions and AR's. Any recommendation on what kind of sight and mount (AK comes with side mount ready for something like a midwest industries mount) to put on this this? Here are a few requirements: 1. I would like...
  10. T

    Suppressors Buying NFA items like an M60

    --- I know this isn't a suppressor, but there isn't a forum for MG's that I found and this seems most related as it is an NFA item --- I am considering buying a transferable M60 (and/or maybe an m16). I've got the transfer part figured out from my suppressor experience. Does anyone experienced...
  11. T

    Accessories Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    These are not the cheaper plastic tipped rounds, but the BTHP that have been impossible to find lately (model 82306 not 82300) 4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my...
  12. T

    Accessories SOLD AI AIAX 6mm Creedmoor Brux Barrel

    I am selling a Barrel that came with the 2014 SA AX I bought that the previous owner used but I never used. Here is all the info I have on it: 26" 6mm Creedmoor Brux Barrel Threaded 5/8-24 Comes with a Blast Tamer Brake 1/8 twist .237 Brux Heavy Varmint Contour ~300 Rounds through the tube...
  13. T

    Sidearms & Scatterguns Sharpening your blades?

    I've got an edge maker pro system that works ok on my kitchen knives, but I think my blades are too thick (and possibly require the correct edge angles?). Whats a good system thats pretty foolproof and not too time intensive to keep a sharp edge on our camping/fighting/survival/etc knives?
  14. T

    Accessories Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my closet over the months. New boxes of 285gr Hornady is $90-$110 a box plus shipping($360-$440) depending on where they are in...
  15. T

    Accessories SOLD AI AIAX 6mm Creedmoor Brux Barrel

    I am selling a Barrel that came with the 2014 SA AX I bought that the previous owner used but I never used. Here is all the info I have on it: 26" 6mm Creedmoor Brux Barrel Threaded 5/8-24 Comes with a Blast Tamer Brake 1/8 twist .237 Brux Heavy Varmint Contour ~300 Rounds through the tube...
  16. T

    AXMC barrel torque

    I haven't used the switching function on my AXMC and wanted to confirm what the torque was on the bolt. I think the manual says 49 in-lb. But I remember a few people, including @lowlight , mentioning they use higher (maybe 55?) and that the lower factory spec didn't show as much repeatability...
  17. T

    Hornady 285gr 338lm match ammo - 285 gr ELD 338 Lapua Magnum

    4 boxes (80 rounds) of some of the best factory match ammo for the 338lm. The rounds are like new and the boxes have just a little wear from being shuffled around in my closet over the months. I am asking $330 OBO
  18. T

    6mm creedmoor bullets/brass/dies (105gr Berger/Hornady Brass/Whidden Dies)

    I got a 6mm Brux Barrel with my AIAX purchase that I planned on starting to reload for and never ended up using. Here is everything I got: Berger Hybrid 105gr Bullets, 5 boxes for a total of 500. $150 shipped SOLD 500 pieces - Brand new 6mm creedmoor hornady brass. This isn't the reformed...
  19. T

    SOLD AI AIAX 6mm Brux Barrel

    I am selling a Barrel that came with the 2014 SA AX I bought that the previous owner used but I never used. Here is all the info I have on it: 26" 6mm Creedmoor Brux Barrel Threaded 5/8-24 Comes with a Blast Tamer Brake 1/8 twist .237 Brux Heavy Varmint Contour ~300 Rounds through the tube...
  20. T

    AXMC 2018 profile barrels compatibility

    Whats the difference in the 2018 barrel profiles (versus the standard ones) on the AXMC barrels that I see at EuroOptic. Are the 2018+ barrels compatibile with the first AXMC's (~2016ish)?