Search results

  1. W

    Gunsmithing Burr in the neck of my chamber

    Re: Burr in the neck of my chamber Smith took a look. Seems to just be a burr back behind the chamber so it's actully just scratching during ejection...easy fix.
  2. W

    Gunsmithing Burr in the neck of my chamber

    Re: Burr in the neck of my chamber Great stuff to look at thanks for the inputs
  3. W

    Gunsmithing Burr in the neck of my chamber

    I think I have a small burr in the neck of my 325WSM's chamber. It's leaving a light scratch that kind of curves from right to left up the neck as you look at the case from above/behind. Is this anything worth worrying about? Is it a major fix? thanks, Will
  4. W

    Problem--700BDL 30-06 sporter group jumps around

    Haven't been really using my 30-06 much these days since I got a 325WSM, but I decided to dust it off with some nosler 150g CT's and some 110g vmax's. Thought I'd set it up as a coyote killer. Well I decided to zero it with the 150g CT's and then just map the different zero point for the 110g...
  5. W

    Rock River Arms .458 SOCOM A4

    Any advice/experience with either the .458 SOCOM or the Rock River Arms platform?
  6. W

    Which Group Is Better .., why do you think so??

    Re: Which Group Is Better ..... why do you think so??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tripwire</div><div class="ubbcode-body"> ...if you'd like to discuss that with Dan Newberry himself, I can hook you up. </div></div> Knowing...or even...
  7. W

    Which Group Is Better .., why do you think so??

    Re: Which Group Is Better ..... why do you think so??? Ditto that Steel-r!
  8. W

    Which Group Is Better .., why do you think so??

    Re: Which Group Is Better ..... why do you think so??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Tripwire</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wbeard</div><div class="ubbcode-body">Your...
  9. W

    Which Group Is Better .., why do you think so??

    Re: Which Group Is Better ..... why do you think so??? The Difference between 41g and 42g is not enough powder to cause that much drop at 100yd by itself...but you know, any time the data is questionable go do it again. PERSONALLY i think you're wasting your time with any analysis of WHERE...
  10. W

    How to safely dispose of old powder/primers?

    Re: How to safely dispose of old powder/primers? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MontanaKid</div><div class="ubbcode-body">Well, I'll tell you what you shouldn't do. Don't put the stuff in a coffee can(s), be sure to pack it tight, then run some...
  11. W

    How to safely dispose of old powder/primers?

    Re: How to safely dispose of old powder/primers? Trash the primers and wrap the powder by the cup in notebook paper and toss on your next bonfire---woohooo Or fill an empty plastic coffee can with the powder then replace the fuse in a bottle rocket with a loooonnnnggg fuse and make launch...
  12. W

    Which Group Is Better .., why do you think so??

    Re: Which Group Is Better??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jeffvn</div><div class="ubbcode-body">+1 horizontal stringing tends to be conditions related and vertical load-related. But if you get sloppy with your trigger pull, you can induce some...
  13. W

    Sidearms & Scatterguns Threaded barrel for SR9?

    Re: Threaded barrel for SR9? hmmm I Love mine. but to each his own. personally short of a 1911 I think it's the best fit/function of them all.
  14. W

    Case too small for minimum powder charge

    Re: Case too small for minimum powder charge different cases from different lots. I use Ultrasonic cleaning so nothing inside.
  15. W

    Sidearms & Scatterguns Threaded barrel for SR9?

    Re: Threaded barrel for SR9? Why do you say a waste? Have you ever handled one?
  16. W

    Best 30-06 110gr VMAX Recipe?

    I know it's a shoot off of another post.....but.... Anyone have a good PERSONALLY tested recipe including OAL? I'm loading a 0.20 freebore for 2.55" length to ogive.
  17. W

    Sidearms & Scatterguns Threaded barrel for SR9?

    Anyone know where to get ahold of a threaded barrel for an SR9?
  18. W

    Letting vinegar blacken brass ok?

    Re: Letting vinegar blacken brass ok? Sharpies are great!!! but they put too much shine on the brass when using black. (they are black, but very high gloss and reflective when using sharpie) Thanks for the inputs, they are very reassuring. I would have hated to use the blacking process on...
  19. W

    Case too small for minimum powder charge

    Re: Case too small for minimum powder charge <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ddavis</div><div class="ubbcode-body">Is it possible you dumped the wrong powder back into the jug? Possibly something a bit less dense? Look closely at the powder in...
  20. W

    Case too small for minimum powder charge

    Re: Case too small for minimum powder charge Sorry....Sierra 110gr Jacketed HP referencing my "Complete Reloading Manual for the .30-06 Springfield" published by Loadbooks. (the small caliber specific manuals)