Search results

  1. shawn_40312

    Gunsmithing Cut and thread a LMT MRP barrel.

    Re: Cut and thread a LMT MRP barrel. Send it to ADCO or Tornado Technologies
  2. shawn_40312

    Remington 540x aftermarket stocks

    Re: Remington 540x aftermarket stocks Im not looking for a strictly benchrest type of stock. Any aftermarket quality stock with adjustable check rest and cut outs for the factory adjustable lop and hand stop would be preferred.
  3. shawn_40312

    Remington 540x aftermarket stocks

    Can someone help me out? Looking to buy an aftermarket benchrest type stock for a Remington 540x but cannot find anyone that sells one.
  4. shawn_40312

    Gunsmithing AAC cyclone is the wrong thread pitch.

    Re: AAC cyclone is the wrong thread pitch. To update everyone on what has happened, AAC screwed up and they admitted to it over the phone, but has since made it right by paying to have the barrel threads turned down on the barrel. They gave me the other option of having a new can with the...
  5. shawn_40312

    Gunsmithing AAC cyclone is the wrong thread pitch.

    Re: AAC cyclone is the wrong thread pitch. It looks like AAC is going to have Tornado tech turn down the barrel threads to the proper pitch. My only other option was to start all of the paperwork back over again with a new can and i wasnt going to do that.
  6. shawn_40312

    Gunsmithing Cutting down a fluted barrel?

    Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AXEMAN</div><div class="ubbcode-body">hey sorry i thought this was more about the supressor than yu wanting to shorten a barrel. someone in here did what you want, shortened a barrel...
  7. shawn_40312

    Gunsmithing Cutting down a fluted barrel?

    Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">It can be done but it looks a little silly. You also need to be sure that you will have enough metal left to thread the barrel. Meaning the...
  8. shawn_40312

    Gunsmithing Cutting down a fluted barrel?

    Re: Cutting down a fluted barrel? Blaser R93 LRS2 barrel
  9. shawn_40312

    Suppressors TRG22 thread adapter for 5/8-24 Suppressor

    Re: TRG22 thread adapter for 5/8-24 Suppressor Bump i would like to know this as well since my Blaser R93 has the same M18x1.0RH threads as the sako.
  10. shawn_40312

    Gunsmithing Cutting down a fluted barrel?

    Re: Cutting down a fluted barrel? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HateCA</div><div class="ubbcode-body">It can be done but it looks a little silly. You also need to be sure that you will have enough metal left to thread the barrel. Meaning the...
  11. shawn_40312

    Gunsmithing Cutting down a fluted barrel?

    Anyone had this done before or could recommend a gunsmith to cut and re thread a fluted barrel? Thinking about doing this for my Cyclone. Thanks.
  12. shawn_40312

    Gunsmithing AAC cyclone is the wrong thread pitch.

    Re: AAC cyclone is the wrong thread pitch. Is it possible to have a fluted barrel cut 4" and re threaded? The fluting would probably look like shit but....
  13. shawn_40312

    Gunsmithing AAC cyclone is the wrong thread pitch.

    Just went and picked up my AAC cyclone and came back disappointed. I requested M18x1.0RH thread and what i have will not even thread on. I believe they sent me one for 5/8x24. Anyone else experienced this? What can be done to the silencer or the rifle (Blaser R93 LRS2 with fluted barrel)
  14. shawn_40312

    168 FGMM Group Sizes?

    Re: 168 FGMM Group Sizes? My tightest groups so far were with 168's. 5 shot group measuring just under .5 at 100 yards. The rifle can shoot better than i can.
  15. shawn_40312

    Sig/Blaser LRS1 ejector issue

    Re: Sig/Blaser LRS1 ejector issue Possible to locktite and tighten down?
  16. shawn_40312

    Gunsmithing What makes a barrel shoot better before cleaning?

    Re: What makes a barrel shoot better before cleani <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Unsichtbar</div><div class="ubbcode-body">Something is wrong if that's the groups you are getting of of a Blaser LRS. Have you checked the the allen screws that on...
  17. shawn_40312

    Gunsmithing Finnish nagant help

    Re: Finnish nagant help <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Metalhead0483</div><div class="ubbcode-body">Heh, took me all of three minutes to get my answer. Thanks for the link jthyttin </div></div> Who was the answer? I would like my M44 fitted with...
  18. shawn_40312

    Gunsmithing What makes a barrel shoot better before cleaning?

    Re: What makes a barrel shoot better before cleani Here is the typical groups that i am talking about before the barrel tightens up: And here is six shots after the barrel warms up a little after putting rounds downrange(the flier is my fault so i shot another round): Rifle is a Blaser R93...
  19. shawn_40312

    Gunsmithing What makes a barrel shoot better before cleaning?

    Seems that after cleaning all of the copper out of my barrel, it takes 15 to 20 rounds before my shots tighten back up. I will shoot between 1/2 and 3/4" groups after a good cleaning but once i get a few rounds thru the barrel, my groups will tighten up under 1/2" at 100 yards. Is it just me or...
  20. shawn_40312

    Rifle Scopes How hard is it for Leupold to fix a canted reticle

    Re: How hard is it for Leupold to fix a canted ret <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Wild Bill C</div><div class="ubbcode-body">Think the thread deserves pictures of the "supposedly" repaired scope so the viewing public can draw their own...