Search results

  1. B

    Range Report Help with Shooter app

    Hey guys is there a way to compensate for suppressor shift using the Shooter Ballistic app. My zero shift with the suppressor is 0.5 mill low and 0.2 mils left from my unsuppressed zero. I added a suppressed version of the rifle to the firearm list thinking there would be a way to compensate for...
  2. B

    Rifle Scopes Swaro Z6I-BRT 1-6

    Have put this scope on my 3 gun AR and really like it so far, have only shot 1 match with it and all went well. Replaced a Meopta K-dot 1-4. Have looked in the manual and Swaro's web site trying to find the value of the windage hash marks. Manual just states they are calibrated for 10 and 20...
  3. B

    Range Report 6 Dasher fireforming loads

    Needed to get some brass fireformed for the Dasher so loaded up 200 rounds of Virgin Lapua 6 BR with 30.5 gr. of RL 15 and 87 gr. V-Max which netted 2900 fps. Bullets were jammed in the lands to aid in the fireforming process. Nice windless evening, which is rare for Kansas. Second pic is full...
  4. B

    3000 lb. Brass Trimmer

    Wanted to load some 338 LM with 300 SMK's but needed to trim the brass, some by as much as .020. Didn't have a collet for hand trimmer so turned down a pilot and used a flat countersink mill in the Bridgeport. Actually works pretty well. Did 100 pieces in about 20 min. Loads worked real well...
  5. B

    338 at 1 mile

    Varget and I went out this evening to see if we could get some data for 1760 yd. (1 mile). We set out 3 cement blocks on end and 2 high for a total of 6 which makes a target 2 moa high and 1.5 moa wide. We painted a bright orange 12" circle in the middle. We are using 250 gr. SMK running 2950...
  6. B

    6 MM Dasher Loads

    My new 6 Dasher came home this week, did it on the cheap by rebarreling a Remington PSS .308. Specs are: Bartlien 6mm 24" barrel Holland recoil lug Trued action Threaded 5/8 X 24 Bushed boltface and grind firing pin to .060 Have shot a few groups using fire forming loads of 30.5 gr. RL-15...
  7. B

    Short Throat .308

    A friend of mine brought over his new to him .308 bolt gun built by a well known builder of top end rifles. Great looking rifle with all the necessities, he says it shoots tight little bug hole groups. In the course of our discussion about the rifle I ask so what bullet does it like and what...