Search results

  1. LANCER

    The "New" Barrett MRAD Thread!!!!!!

    That's because you ordered from Backorder Planet. They don't carry any product, just cross-shippers. (with some exceptions)
  2. LANCER

    LMT .308 MWS

    What is this beautiful piston LMT MWS? When did they come out with these?
  3. LANCER

    Powder IN-STOCK thread

    Tried to snag two of them but sold out by the time I could check out. 45 seconds from "in stock" to gone
  4. LANCER

    LMT .308 MWS

    Great rig! Who makes that reflex can? Looking for a modern reflex design.
  5. LANCER

    Tikka T3 Thread

    I would not recommend an internal wrench for the initial breaking off of the factory barrel, you might destroy that wrench. Get a wheeler external wrench. Once you get it off, you can use the internal for any future barrel changes. New barrel will be fine between 80-100 ft/lbs. Also get a...
  6. LANCER

    Rifle Scopes MRAD & MOA, Can they coexist in the safe?

    Why not both? But all in one optic? Imagine the frustration of using a Leupold MK4 that has MOA turrets and Mildot reticle? Had one of those that came with my MRAD as a kit. Took it off pretty fast and sold it. I did not like that at all. I'm all MILS now because shooting buddies all use...
  7. LANCER

    Gunsmithing Proof CF prefit barrel on Tikka T3x - Bolt Closes on no-go gauge but not on Field gauge

    It's possible that on the first resize, I may have just done a FL size using the setting from the previous factory barrel. I don't recall at this time but I agree, I shouldn't have the issue so I must have done something wrong initially, and then "tolerance stacked" from then on :-) I was...
  8. LANCER

    Gunsmithing Proof CF prefit barrel on Tikka T3x - Bolt Closes on no-go gauge but not on Field gauge

    I've always taken care to FL size my brass "the right way" as best as I'm able. I use the Hornady comparator set on all my bolt gun brass, as well as the RCBS precision MIC set and can confirm that my brass doesn't get shoulder-bumped more than 2 thou each time. I use 2 dies to size: A Lee...
  9. LANCER

    Possible stupid suppressor question

    I have two SOCOM cans and they both leaked like that when new. They don't anymore. Either because carbon worked its way towards the ring and seals it off better, or because I took my QD rings off when Cerakoting them and maybe added a bit more material to the locking ring. Not sure but they...
  10. LANCER

    Gunsmithing Need M-Lok slots on my MRAD

    That looks great! I think I'll be sending mine in for this also.
  11. LANCER

    Gunsmithing Proof CF prefit barrel on Tikka T3x - Bolt Closes on no-go gauge but not on Field gauge

    I bought two bags of starline (Lapua out of stock when I posted initially) and on the third firing I had ICHS on 30% of the cases. I have since fixed the generous headspace issue and will buy new brass again.
  12. LANCER

    Gunsmithing Proof CF prefit barrel on Tikka T3x - Bolt Closes on no-go gauge but not on Field gauge

    A small update: I was tired of getting insipient case head separations at 3 firings, so I decided last weekend to pull the barrel and fix my headspace issues. Since I cerakoted the action face, I tackled the low hanging fruit by getting my flattest stone and carefully removing the cerakote on...
  13. LANCER

    Kinetic Research Group SOTIC?

    You're right. I just zoomed in some. Kinda looked like polished, nitre-blued steel for a second.
  14. LANCER

    Kinetic Research Group SOTIC?

    Did you flame-anneal that barrel nut? Looks cool! What barrel is that, did you get one spun up and who made it for you if so?
  15. LANCER

    1 mile plus- .338LM vs 30 cal magnums

    You can stabilize a 300 just fine in 338LM, with a 1:9.25 twist barrel, however the cartridge was designed originally to send a 250gr rebated/lockbase projectile at 3000 fps+. You can't achieve that with 300gr bullets (at least not without pressure problems and zero brass life) I've pushed...
  16. LANCER

    Tikka T3 Thread

    I run mine at 3.5lbs, but it doesn't feel that heavy. I think it's the adjustable shoe geometry that makes it feel lighter than it really is.
  17. LANCER

    Accuracy International Picture Thread

    This is the best thing I have ever seen
  18. LANCER

    Tikka T3 Thread

    You can try the KRG Midas. Fully adjustable and 2-stage. It's great. I have one on my SOTIC. https://kineticresearchgroup.com/product/midas-trigger/
  19. LANCER

    308 AR10 Build Info/Picture Thread

    Who made the barrel extension for the MWS? Can you share? Thanks